Grid
List
Cartridge Filter Bag for CFLUX1 or CFLUX3, 26" x 24", Pack of 10
Cartridge Filter Bag for CFLUX1 or CFLUX3, 26" x 24", Pack of 10
Collection Drum Bag for CFLUX1 or PFLUX1, 32" x 43", Pack of 10
Collection Drum Bag for CFLUX1 or PFLUX1, 32" x 43", Pack of 10
Collection Drum Bag for CFLUX3 or PFLUX3, 38" x 38", Pack of 10
Collection Drum Bag for CFLUX3 or PFLUX3, 38" x 38", Pack of 10
100mm Diameter Transparent Flexible Hose
Yandles 100mm diameter, transparent flexible hose
32mm Flexible Black Extraction Hose Sold Per Meter
Cut to length, enter a quantity for total length above, e.g. Q4 = 4M Length, ordering x1 will get you 1M Length
Dust Right? 4'' Tool Port 2pk
Dust Right? 4'' Tool Port
Dust Right? Auxiliary Hose Port Set 2pce
Dust Right? Auxiliary Hose Port Set
Record Power CamVac 2M of 100mm Dust Extraction Hose LH Helix
RECORD POWER 2M of 100mm Dust Extraction Hose LH Helix
Record Power DX1500B 100-32mm Reducer 2m 32mm Hose for HPLV Extractors
Record Power DX1500B 100-32mm Reducer 2m 32mm Hose for HPLV Extractors
Universal Small Port Hose Kit 4pce 53001
Universal Small Port Hose Kit 4pce
Yandles 125mm Diameter Transparent Flexible Hose
Yandles 125mm diameter, transparent flexible hose
Yandles 150mm Diameter Transparent Flexible Hose
Yandles 150mm diameter, transparent flexible hose, 1 metre
Yandles 200mm diameter, transparent flexible hose
Yandles 200mm diameter, transparent flexible hose
Yandles 38mm Diameter Transparent Flexible Hose
Yandles 38mm diameter, transparent flexible hose
Yandles 50mm Diameter Transparent Flexible Hose
Yandles 50mm diameter, transparent flexible hose
Yandles 63mm Diameter Transparent Flexible Hose
Yandles 65mm diameter, transparent flexible hose
Yandles 76mm Diameter Transparent Flexible Hose
Yandles 75mm diameter, transparent flexible hose
42-32mm ID Threaded Flexible Reducer Cuff / Adaptor, Screw for Yandles 32mm Black Hose
42-32mm ID / 43-36mm OD
Threaded at 43mm end only
Flexible
Screws onto Yandles 32mm Black Hose & Record Dx1500b Hose
Fits Record Power DX1500C Power Tool Adaptor
CamVac 2.5' - 14' Floor tool with rear wheels CVA250-15-100
A black 14" wide x 2.5" thick floor tool with rear wheels. As included in the CamVac Full Toolkit.
CamVac 2.5' Round Dusting Brush (Black) CVA250-13-100
A black 2.5" Round Dusting Brush as found in the CamVac Full Tool Kit.
CamVac 286 Caster Set for GV286 & GV336 Extractors CVA286-27-100
Caster Wheel Kit for GV286 & GV336 Series Extractors.
CamVac 386 Caster Set for GV386 Extractors CVA386-27-100
Caster Wheel Kit for GV386 Series Extractors.
CamVac 486 Caster Set for GV486 Dust Extractors
CamVac 486 Caster Set for GV486 Extractors CVA486-27-100
CamVac Black plastic 'T' fitting CVA250-50-103
Black Plastic 2.5" T Fitting.
CamVac Pose hose Round Nozzle CVA250-80-101
Self supporting extraction nozzle, ideal for woodturning. This is an official LOC-LINE® product, the original and best modular hose system. Suitable for 2.5" systems.
CARTIDGE FILTER HEPA T31
CARTIDGE FILTER HEPA T31
Charnwood 100E Elbow, 90 degrees for 100mm hose
When running hose around the workshop, it is sometimes easier to use an elbow at the corners rather than run the flexible hose around.
Two 100mm hose clamps are required to fasten the hoses securely. For use with 100mm diameter hose only.
Charnwood 100HC Hose Clamp for 100mm Diameter Hose
Wire type hose clamp for securing hose to machinery or fittings
For use with 100mm diameter hose.
Charnwood 100QAHC Quick Action Hose Clamp
Quick action bridged hose clamp.
This ultimate hose clamp has a quick action lever, to lock it in place allowing the hose to be released from one machine machine and clamped onto the next one instantly. In addition the design features a bridge which steps over the wire helix inside the hose, giving a truly powerful grip.
A worm drive, adjustable by screwdriver can be used to fine tune the clamp to...
Charnwood 100SL 100mm Sleeve
100mm Connector Sleeve.
This handy new product allows you to join two other fittings together without having to use hose.
i.e. Joining a 100Y Y-Piece onto a 100E Elbow.The sleeve is tapered internally so there is no need for hose clamps.
Charnwood 100SP Hose Splice 100mm Diameter
Joining splice used to join two lengths of 100mm diameter hose togethor, for example when a run of over 10 metres in length is required.
Two 100mm hose clamps are required to fasten the hoses securely. For use with 100mm diameter hose only.
Charnwood 125HC Hose Clamp for 125mm Diameter Hose
Worm drive hose clamp for securing hose to machinery or fittings
For use with 125mm diameter hose.
Charnwood 150HC Hose Clamp for 150mm Diameter Hose
Worm drive hose clamp for securing hose to machinery or fittings
For use with 150mm diameter hose.
Charnwood 4 Piece Stepped Reducer 100mm to 35mm
Universal Reducer.
This Reducer consists of 5 pieces which can be joined and used as a single reducer or split to give a variety of options.
The fittings are all tapered so a millimetre each way should be OK to give decent fit.
Can be used to reduce form 100mm diameter hose down to;
1
2
3
4
5
Outside Diameter
104
68
45
40
35
Inside Diameter
100
62
40
34
28
Charnwood 75HC Hose Clamp for 65 or 75mm Diameter Hose
Worm drive hose clamp for securing hose to machinery or fittings
For use with both 65mm or 75mm diameter hoses.
Charnwood Bench Sweeper dust collection kit
Dust extractor hose attachment.
A light weight wand made from tough plastic with a brush on the collection end. Used for collecting dust and chippings from benches in the workshop. The handle is adjustable to find the most comfortable angle in use.
The connection end is 100mm diameter to suit our standard 100FLEX transparent flexible hose, a hose clamp may also be required to secure the hose to the...
Charnwood Bracket for Wall Mounting 100mm Hose
Plastic Bracket for Wall Mounting Hose.
For use with 100mm diameter hose, or smaller, the wall hanging bracket will allow you to fix a hose line to the wall or ceiling. Comes complete with fixing screws and raw plugs.
Charnwood Dust hood 160mm x 160mm, 100mm diameter outlet
Often used to adapt older machinery which did not originally have extraction points fitted or to make collection funnels for other types of machinery such as lathes.
A 100mm diameter hose clamp should be used to secure the hose.
Dimensions 160mm x 160mm with a 100mm diameter outlet.
Charnwood Dust Hood 250mm x 110mm, 100mm diameter outlet
A plastic dust collector hood with a wide mouth at one end and a round hose connection at the other. Suitable for use with standard 100mm diameter flexible hose. You may need a hose clamp to secure the hose to the round end, our product ref. 100HC.
Ideal for Collecting from small lathes, sanding discs or any other machinery which did not originally come supplied with a purpose made dust collection...
Charnwood Dust hood 310mm x 310mm, 100mm diameter outlet
Often used to adapt older machinery which did not originally have extraction points fitted or to make collection funnels for other types of machinery such as lathes.
A 100mm hose clamp should be used to secure the hose.
Dimensions 310mm x 310mm with a 100mm diameter outlet.
Charnwood Dust Hood 410mm x 320mm, 260 depth, 100mm outlet
Dust Collection Hood.
Used to adapt older machinery which did not originally have extraction points fitted or to make collection funnels for other types of machinery such as lathes or Radial arm saws which can be difficult to get efficient extraction from.
100mm connection point for use with 100mm hose. A hose clamp is required to fasten the hose securely.
DH410 Opening size 410mm x 320mm,...
Charnwood Floor Sweep Dust Hood
As an alternative to using a floor sweeping attachment for your dust extractor, this collection hood sits on the floor against a wall of the workshop with a hose attached to your extractor. Use a trusty broom to sweep a pile of dust and chippings into the mouth of the hood and it will all be sucked away and deposited in the collection bag.
The opening is 540mm wide and the outlet is 100mm diameter,...
Charnwood Floor Sweeper dust collection kit
Floor sweeping attachment.
For collecting dust and chippings from the floor of the workshop. This lightweight yet tough attachment has an opening 150mm x 250mm wide which can be simply moved across the floor, in the same way as a domestic vacuum cleaner. The overall length is 1 metre which prevents the user from having to stoop down when sweeping the floor. For further comfort the handle is also...
Charnwood Hose Clamp 50mm Diameter
Worm drive hose clamp for securing hose to machinery or fittings
For use with both 50mm and 40mm diameter hoses.