Grid
List
Japanese Iwasaki Carvers File - Comparable to 280g Abrasive
Made in Japan | Unique Design | Carvers File
Japanese Iwasaki Standard Flat Needle Carvers File - Fast Material Removal,
Made in Japan | Fast Removal | Includes Rubber Handle
Japanese Iwasaki Standard Round Carvers File, 200mm
The Iwasaki standard carvers files offer exceptionally fast material removal, in fact almost five times faster than a conventional machine cut rasp.
The finish left by an Iwasaki standard carvers file is comparable to that of 280 grit abrasive paper so virtually no finishing is required.
The unique design of the spiral teeth ensuring the file does not easily become clogged. All in all these files...
Replacement Blade for Shinto SR30 Saw Rasp
Replacement Blade for Shinto SR30 Saw Rasp
The Shinto SR30 is a double handed version of our ever popular SR10 but also features a slightly larger blade that is replaceable.
Good for ferrous and nonferrous metals, wood, veneer, laminates, soft plastics, gypsum-board etc.The Shinto saw rasp is a very unique Japanese tool, the blade is made up of strips of a material similar to a hacksaw blade but...
Shinto SR30 Japanese Saw Rasp
The Shinto SR30 is a double handed version of our ever popular SR10 but also features a slightly larger blade that is replaceable.
Good for ferrous and nonferrous metals, wood, veneer, laminates, soft plastics, gypsum-board etc.The Shinto saw rasp is a very unique Japanese tool, the blade is made up of strips of a material similar to a hacksaw blade but with teeth cut on both edges then arranged...
SR-20 Shinto Saw Rasp 250mm
The Shinto saw rasp is a very unique Japanese tool, the blade is made up of strips of a material similar to a hacksaw blade but with teeth cut on both edges then arranged in a lattice pattern. The rasp features fine teeth on one side and coarse on the opposite making this in essence two tools for the price of one, it is also impossible to clog as the waste material simply falls through the lattice...
200mm Japanese Restorers Cats Paw Bar
This very finely made restorers bar from Mokuba of Japan is the finest of its type we have found. It measures 200mm in length and features a flared end, claw end and tack hammer head.
Flared End
Claw End
Tack Hammer Head
Nail/Tack Straightening Groove
Overall Length 200mm
Flared End Width 35mm
One end features a claw for removing nails or tacks whilst the other flares into a wide and...
200mm Japanese Restorers Nail Claw Bar
This very finely made restorers nail claw bar from Mokuba of Japan is the finest of its type we have found. It measures 200mm in length and features a flared end with nail remover slot, claw end and tack hammer head.
Flared End with Nail Remover Slot
Claw End
Tack Hammer Head
Nail/Tack Straightening Groove
Overall Length 200mm
Flared End Width 43mm
One end features a claw for removing...
250mm Japanese Restorers Nail Claw Bar
This very finely made restorers nail claw bar from Mokuba of Japan is the finest of its type we have found. It measures 250mm in length and features a flared end with nail remover slot, claw end and tack hammer head. Flared End with Nail Remover Slot Claw End Tack Hammer Head Nail/Tack Straightening Groove Overall Length 250mm Flared End Width 43mm
One end features a claw for removing nails or tacks...
Asahi Mokuba 3 Way Nail Punch 160mm
Beautifully crafted as you would expect from a Japanese tool this three way nail bar from Mokuba measures 160mm in length and features a nail setting end, claw end and tack hammer head.
Nail Setting End
Claw End
Tack Hammer Head
Nail/Tack Straightening Groove
Length 160mm
The nail punch head features a slightly concave end to allow nails to be easily located and stop them from slipping.
The...
Asahi Mokuba 3 Way Nail Punch 210mm
Beautifully crafted as you would expect from a Japanese tool this three way nail bar from Mokuba measures 210mm in length and features a nail setting end, claw end and tack hammer head.
Nail Setting End
Claw End
Tack Hammer Head
Nail/Tack Straightening Groove
Length 210mm
The nail punch head features a slightly concave end to allow nails to be easily located and stop them from slipping.
The...
Japanese Laminated SK5 High Carbon Steel Nomi Chisels
For those who desire the balance and functionality of a Japanese chisel without the price tag of their high end laminated cousins we have sourced these great value SK5 high carbon tool steel laminated chisels. SK5 is a high grade Japanese tool steel often used in the manufacture of quality knife blades, it offers easy sharpening with a good edge holding property at an exceptionally low price. The handles...
Japanese Shirogami Nomi Chisels
Our NK series Shirogami Ichigou Nomi chisels feature a laminated blade of Hitachi white paper tool steel and high carbon steel, this combination offers the user exceptional edge holding ability at a very attractive price. The handles are from quality Japanese red oak with a rear iron hoop to prevent splitting. Why white paper steel? White paper steel or Shirogami as it is known in Japan is a high...
Japanese Kiridashi Marking Knives
Our Japanese Kiridashi marking knives are of the finest quality, the laminated blades are hammer tone finished on the face and flat ground on the back side to register true against a marking gauge, the back side of the business end also has a slight hollow grind for ease of lapping the back of the blade. The cutting edge comes to a very fine point and is double bevelled then polished to produce the...
Asahi 115g Japanese Maru Genou Hammer
The Japanese Maru Gennou is a good general purpose workshop hammer featuring two round faces. The high quality steel head if fitted to a strong Japanese oak handle.As with all professional Japanese hammers one face of the hammers head is ground flat and the opposing face is ground to a slight convex.Hammer Weight 115g
Asahi 375g Japanese Daruma Gennou Hammer
The Japanese Daruma Gennou is designed for striking wood chisels but you will find many other uses for these fine hammers around the workshop. The feature large round faces for a positive strike and are fitted with a strong Japanese oak handle.As with all professional Japanese hammers one face of the hammers head is ground flat and the opposing face is ground to a slight convex.
Hammer Weight 375g
Asahi 375g Japanese Octagonal Gennou Hammer
Probably the most popular of all the Japanese style hammers the octagonal Gennou is a true all-rounder capable of driving nails, striking chisels and setting wooden planes. The silver octagonal heads are very nicely finished and fitted with a high-quality Japanese oak handle.As with all professional Japanese hammers, one face of the hammers head is ground flat and the opposing face is ground to a...
Japanese Octagonal Gennou Hammers 375g
Probably the most popular of all the Japanese style hammers the octagonal Gennou is a true all rounder capable of driving nails, striking chisels and setting wooden planes. The silver octagonal heads are very nicely finished and fitted with a high quality Japanese oak handle. As with all professional Japanese hammers one face of the hammers head is ground flat and the opposing face is ground to a...
Japanese Soft Faced Mallet from Asahi - Oak Handle
Sometimes a project requires a little gentle persuasion to bring a joint together without the risk of bruising the timber. Our Japanese soft faced mallets are just the ticket for this, they feature a quality cast iron head fitted with two medium density interchangeable plastic faces and a strong Japanese white oak handle.
Shogun 100mm Folding Fine Cut Saw
The Shogun range of folding saws feature a wooden handle which incorporates a folding mechanism, this allows the high quality blade to be safely folded away when not in use. The blades are of high quality Japanese steel and very thin to allow accurate cutting, the teeth are razor sharp and impulse hardened to ensure a long service life. The ZHC-4 Features: Quality Wooden Handle Blade Length 100mm...
Shogun 100mm Folding Flush Cut Saw
The Shogun range of folding saws feature a wooden handle which incorporates a folding mechanism, this allows the high quality blade to be safely folded away when not in use. The blades are of high quality Japanese steel and very thin to allow accurate cutting, the teeth are razor sharp and impulse hardened to ensure a long service life. The ZHC-7 Features: Quality Wooden Handle Blade Length 100mm...
Shogun 100mm Folding Wood Cut Saw
The Shogun range of folding saws feature a wooden handle which incorporates a folding mechanism, this allows the high quality blade to be safely folded away when not in use. The blades are of high quality Japanese steel and very thin to allow accurate cutting, the teeth are razor sharp and impulse hardened to ensure a long service life. The ZHC-7 Features: Quality Wooden Handle Blade Length 100mm...
Shogun 100mm Keyhole Saw
A very handy saw the Shogun keyhole saw is designed to cut holes from the centre of a panel or door. It is also fantastic for removing bulk material from a carving blank prior to the onset of carving.
Shogun 100mm Super Precision Mini Dozuki Saw
If making small decorative boxes, jewellery boxes and the like is your thing then the Shogun super precision mini Dozuki saw is the answer to your dreams. The mini Dozuki features a steel spine to steady the ultra fine blade allowing very accurate cutting of the smallest dovetails.
Shogun 115mm Precision V-Tooth Saw
The Shogun 180mm Jet series pull saw is a precision tool designed for trimming dowels, making small precision cuts and even miniature dovetails. The 180mm replaceable blade is a very fine 24 tpi and features a single edge tooth design for ultra smooth cuts.
Shogun 180mm Flush Cut Saw
The Shogun 180mm Jet series pull saw is a precision tool designed for trimming dowels, making small precision cuts and even miniature dovetails. The 180mm replaceable blade is a very fine 24 tpi and features a single edge tooth design for ultra smooth cuts.
Shogun 180mm Flush Cut Saw Replacement Blade
THIS LISTING IS FOR THE SPARE BLADE ONLY
The Shogun 180mm Jet series pull saw is a precision tool designed for trimming dowels, making small precision cuts and even miniature dovetails. The 180mm replaceable blade is a very fine 24 tpi and features a single edge tooth design for ultra smooth cuts.
Shogun 190mm Dozuki Craft Saw
The Shogun 190mm Dozuki craft saw is ideal for smaller tenon and dovetail cuts, it also makes a great general purpose saw for the home user. All Shogun craft saws feature a triple edge tooth, fast cut pull stroke blade coupled with an ergonomic and comfortable black plastic handle.
Shogun 190mm Dozuki Craft Saw SPARE BLADE
THIS LISTING IS FOR THE SPARE BLADE ONLY
The Shogun 190mm Dozuki craft saw is ideal for smaller tenon and dovetail cuts, it also makes a great general purpose saw for the home user. All Shogun craft saws feature a triple edge tooth, fast cut pull stroke blade coupled with an ergonomic and comfortable black plastic handle.
Shogun 190mm Kataba Craft Saw
The Shogun 190mm Kataba craft saw is ideal for smaller or more delicate cutting tasks, it also makes a great general purpose saw for the home user. All Shogun craft saws feature a triple edge tooth, fast cut pull stroke blade coupled with an ergonomic and comfortable black plastic handle.
Shogun 190mm Kataba Craft Saw SPARE BLADE
THIS LISTING IS FOR THE SPARE BLADE ONLY
The Shogun 190mm Kataba craft saw is ideal for smaller or more delicate cutting tasks, it also makes a great general purpose saw for the home user. All Shogun craft saws feature a triple edge tooth, fast cut pull stroke blade coupled with an ergonomic and comfortable black plastic handle.
Shogun 240mm Combination Dozuki/Flush Saw
Exclusively from shogun this unique 2 in 1 pull cut saw features a Dozuki and Flush Cut saw in one blade.
The blade is hard chrome plated and is replacable.
The first 90mm of the blade has non set teeth and is flexible so can be used for flush cutting.
The second section is 150mm long and features a Dozuki blade with back spine for dovetailing, tenoning, cross-cutting, box making and general cabinet...
Shogun 240mm Dozuki Saw
The larger brother to our best selling Japanese saw the Shogun MP150, the MC24 dozuki is designed for tenon shoulder cutting, cross-cutting and general cabinet making. Featuring a steel back for better rigidity, fine toothing and a thin 0.3mm blade that gives great accuracy. The blade is of course interchangeable as you would expect for a quality Japanese saw.Blade Length: 240mmBlade Thickness: 0.3mmBlade...
Shogun 240mm Dozuki Saw REPLACEMENT BLADE
THIS LISTING IS FOR THE SPARE BLADE ONLY
The larger brother to our best selling Japanese saw the Shogun MP150, the MC24 dozuki is designed for tenon shoulder cutting, cross-cutting and general cabinet making. Featuring a steel back for better rigidity, fine toothing and a thin 0.3mm blade that gives great accuracy. The blade is of course interchangeable as you would expect for a quality Japanese...
Shogun 240mm Ryoba Saw
Possibly the most versatile of all the Japanese saws the Shogun MC2424H Ryoba saw is a true all round work horse. The high quality blade features two cutting edges the first has a 10 TPI toothing configuration for rip cutting and the opposing edge feature a 16 TPI toothing configuration for cross cutting. The 240mm interchangeable blade fixes to a quality ratten wrapped wooden handle that offer fantastic...
Shogun 250mm Deep Cut Dozuki Saw
This classic Dozuki saw from Shogun features a 240mm long super fine tooth blade that is slightly deeper that the traditional Dozuki thus allowing a greater depth of cut. With its deeper blade this Dozuki is ideal for cutting medium to large tenon shoulders but also equally at home making smaller cuts. The blade is of course interchangeable as you would expect for a quality Japanese saw.
Blade Length:...
Shogun 250mm Deep Cut Dozuki Saw SPARE BLADE
THIS LISTING IS FOR THE SPARE BLADE ONLY
This classic Dozuki saw from Shogun features a 240mm long super fine tooth blade that is slightly deeper that the traditional Dozuki thus allowing a greater depth of cut. With its deeper blade this Dozuki is ideal for cutting medium to large tenon shoulders but also equally at home making smaller cuts. The blade is of course interchangeable as you would expect...
Shogun 265mm Folding Hassunme Saw
A solid, well engineered Japanese folding pullsaw, ideal for the toolbox, backpack, car etc. The Shogun OK26 is a fantastic Hassunme saw designed for cross cutting in all types of timber, the extra length of the blade make cutting with the Hassunme fast but still accurate. All our Shogun blades with the PIS prefix will also interchange with this OK265 saw. Blade Length: 265mm Blade Thickness: 0.6mm...
Shogun 265mm Hassunme Saw
The Shogun OK26 is a fantastic Hassunme saw designed for cross cutting in all types of timber, the extra length of the blade make cutting with the Hassunme fast but still accurate. All our Shogun blades with the PIS prefix will also interchange with this OK265 saw.Blade Length: 265mmBlade Thickness: 0.6mmBlade Kerf: 0.9mmBlade Toothing: 16 TPI
Shogun 265mm Hassunme Saw CROSS CUT SPARE BLADE
THIS LISTING IS FOR A SPARE CROSS CUT BLADE ONLY
The Shogun OK26 is a fantastic Hassunme saw designed for cross cutting in all types of timber, the extra length of the blade make cutting with the Hassunme fast but still accurate. All our Shogun blades with the PIS prefix will also interchange with this OK265 saw.Blade Length: 265mmBlade Thickness: 0.6mmBlade Kerf: 0.9mmBlade Toothing: 16 TPI
...
Shogun 265mm Hassunme Saw UNIVERSAL SPARE BLADE
THIS LISTING IS FOR A SPARE UNIVERSAL CUT BLADE ONLY
The Shogun OK26 is a fantastic Hassunme saw designed for cross cutting in all types of timber, the extra length of the blade make cutting with the Hassunme fast but still accurate. All our Shogun blades with the PIS prefix will also interchange with this OK265 saw.Blade Length: 265mmBlade Thickness: 0.6mmBlade Kerf: 0.9mmBlade Toothing: 16 TPI
...
Shogun 265mm Universal Folding Hassunme Saw
A solid, well engineered Japanese folding pullsaw, ideal for the toolbox, backpack, car etc. The NEW Shogun OK265RCFLD is a fantastic Hassunme saw with special universal toothed blade making it capable of Rip, Cross and angle cuts in all types of timber, the extra length of the blade make cutting with the universal Hassunme fast but still accurate. All our Shogun blades with the PIS prefix will also...
Shogun 265mm Universal Hassunme Saw
The Shogun OK265RC is a fantastic Hassunme saw with special universal toothed blade making it capable of Rip, Cross and angle cuts in all types of timber, the extra length of the blade make cutting with the universal Hassunme fast but still accurate. All our Shogun blades with the PIS prefix will also interchange with this OK265RC saw.Blade Length: 265mmBlade Thickness: 0.6mmBlade Kerf: 0.9mmBlade...
Shogun Mighty 240mm Folding Pruning Saw
A superb quality folding pruning saw from Shogun and a must have for any gardening enthusiast or forest dweller. The saw features a heavy duty steel chassis that is chrome plated overlaid with a rubber cushion handle grip, all moving parts are manufactured from quality steel and replacement blades are available. The 240mm pruning blade is carefully heat treated and hard chrome plated for extra durability,...
Planet CF1 Centre Finder
Robust plastic construction. Used to mark the centre of work up to approx 8” diameter.
May also be used on square section.
Planet Dividers
Carefully selected range of Rotur Dividers suitable for measuring between two points, scribing circles prior to turning, marking along a spindle, etc. Fine adjustment.
Planet Inside Calipers
Carefully selected range of Rotur inside calipers suitable for measuring internal dimensions when turning. Fine adjustment.