Featured Products
VERITAS LOW ANGLE JACK PLANE + PM-V11 Blade
The Low Angle Jack Plane is ideal for shooting mitres, working end grain and initial smoothing. Veritas have designated it as a 62 1/2 because of its generous size, greater weight, low centre of gravity and radically set-back mouth. Measuring 380mm(15") long and 57mm(2.1/4") wide, it weighs just under 2.72kg(6lb.). With sides machined square to the sole, a specially shaped lever cap and machined thumb...
£259.99 inc VAT
Grid
List
Block Plane 41 x 1mm Blade
Block Plane
Block Plane No. 2 41 x 1mm Blade
Block Plane No. 2
Duplex Rebate Plane 38 x 2mm Blade
Duplex Rebate Plane
Planet Cabinet Scraper 4' x 2'
Manufactured in Sheffield from flexible, high quality steel, and polished to give a smooth finish. They have a good edge retention and are re-sharpenable
Planet Cabinet Scraper 5' x 2 1/2'
Manufactured in Sheffield from flexible, high quality steel, and polished to give a smooth finish. They have a good edge retention and are re-sharpenable
Planet Cabinet scraper set
Manufactured in Sheffield from flexible,high quality steel, and polished to give a smooth finish. They have a good edge retention and are re-sharpenable Set includes: rectangle, concave/convex, kidney.
Stanley 102 Block Plane 1-12-102
A non-adjustable general purpose Block plane. Ideal for model makers, craft applications and light-duty jobs.
Length: 140 mm (5.1/2in).Cutter width: 35 mm (1.3/8in).
Stanley Moulded Body Surform Block Plane 5-21-104
This moulded body block plane is suitable for use on all types of wood, aluminium, copper, plastics and laminates.The blade is reversible for bull nose work, and it has a lightweight plastic moulded body with a thumb screw for quick release.Fitted with a 140mm (5 1/2in) fine cut blade.Overall length 155mm (6in).
Stubai Drawknife
Stubai are one of Europes premier manufacturers of fine edge tools for woodworkers. These drawknives are hand forged from high carbon steel then hardened and tempered to hold a fine edge. The Stubai drawknife is a mid-size tool which is useful for general woodworking applications such as timber and log work and furniture making, handles are slightly offset from the blade. The cutting edge is 9 1/4”...
VERITAS BULL NOSED PLANE + PM-V11 Blade
The Veritas Bullnose Plane is two planes in one, serving as a bullnose or a chisel plane when required. An adjustable set screw in the toe acts as a stop to accurately set the mouth opening. When you switch configurations, it repositions the toe to the exact opening previously set, so you will never accidentally jam the nose against the blade edge. The plane is 120mm(4.3/4") long by 25mm(1") wide and...
VERITAS LOW ANGLE BLOCK PLANE + PM-V11 Blade
The Veritas Low Angle Block Plane stands apart from many others. Its 12° bed angle and low cutting angle of 37° excel at working end grain. It has higher side wings ideal for shooting, finger grips in each side for better control, and a combined blade advance and lateral adjust that is the most sensitive and accurate available. Two blade guide screws prevent blade shifting. Its compact 162mm long...
VERITAS LOW ANGLE JACK PLANE + PM-V11 Blade
The Low Angle Jack Plane is ideal for shooting mitres, working end grain and initial smoothing. Veritas have designated it as a 62 1/2 because of its generous size, greater weight, low centre of gravity and radically set-back mouth. Measuring 380mm(15") long and 57mm(2.1/4") wide, it weighs just under 2.72kg(6lb.). With sides machined square to the sole, a specially shaped lever cap and machined thumb...
VERITAS LOW ANGLE SMOOTHING PLANE +PM-V11 Blade
A low angle smoothing plane has three key uses. It is used to smooth surfaces, preferably taking a diagonal cut, partly across and partly along the grain. With its generous side wings, it is ideal for shooting mitres and great for end-grain work. The low cutting angle of 37° minimises fibre tearing. With a bed angle of 12°, this is a bevel-up plane like a low angle block plane. It features an adjustable...
VERITAS MEDIUM SHOULDER PLANE + PM-V11 Blade
The Veritas Medium Shoulder Plane can be used on end grain (for example, trimming tenon shoulders) or for paring cross grain as is often required on tenon cheeks. It can also be used for rebate work, planing with the grain. This plane measures 178mm long by 17.5mm wide and weighs 906g. If you have ever held a traditional shoulder plane, you will appreciate how this plane comes readily to hand. The...
VERITAS ROUTER PLANE
With a ductile cast iron body accurately machined and ground flat to a high standard, the Veritas Router Plane is ideal for cutting dadoes and grooves or for cleaning out areas to a precise depth. Blade depth is set by a fine screw feed and a positive locking depth stop sets depth of cut. A spring-loaded collar holds the blade, allowing easy blade adjustment and removal. The knobs are positioned for...
VERITAS SCRUB PLANE C/W A2 BLADE 05P3502
The scrub plane is the tool of choice for major stock removal, the first step when flattening rough stock by hand. Much like a low-angle smooth plane, a scrub is not usually used parallel to the grain, but at an angle of 30° or more. The blade edge is ground with a 75mm(3") radius, so that it takes an aggressive cut.
VERITAS SMALL PLOUGH PLANE
This version of the Veritas Small Plough Plane excels at cutting grooves, rebates and tongues. It also has the ability to cut decorative beading. The Veritas Small Plough Plane features a 168mm (6-5/8") long fence that registers solidly to the workpiece. Double guide rods and a special collet locking system prevent the fence from racking. The fence is through-drilled, allowing you to add a wooden fence...