Record Power DX1000 Fine Filter 45 Litre Extractor - inc 1.5m x 100mm Hose

"As always excellent service"

"This seems a good little extractor, if somewhat noisy! I’ve got this as a dedicated HPLV extractor for my sander and it seems to work well. I also have a LPHV extraction duct to catch anything that this doesn’t. Although it’s quite noisy, we’re using ear defenders in the workshop anyway, so it’s not an issue. Arrived well packaged, promptly, and competitively priced. "

"Cracking bit of kit. About the same most level as a Henry, just a tad louder. Suction is great, already noticing that it removes a good deal more dust and chips when turning, the 100m time is a great upgrade but can be a little tricky to manoeuvre. Wish I'd got one earlier! Brilliant service from yandles, as always."

"Very pleased with dust extractor a great addition to the workshop also with health and safety in mind"

"Good product bought to replace my old record extractor which I have had for approx 18years.this one seems to be quieter than the old one have used it connected to my band saw And whilst sanding on the lathe and to clean up after ,great product and would recommend to anyone. Only small gripe I have is that when fitting the motor and lid on the drum I found that the drum was not perfectly round and had some difficulty connecting both but a bit of fettling cured it .I must say that this was not what you get when buying record products usually very good. Very satisfied with Handles very fast delivery as always good company to deal with"

"Good product bought to replace my old record extractor which I have had for approx 18years.this one seems to be quieter than the old one have used it connected to my band saw And whilst sanding on the lathe and to clean up after ,great product and would recommend to anyone. Only small gripe I have is that when fitting the motor and lid on the drum I found that the drum was not perfectly round and had some difficulty connecting both but a bit of fettling cured it .I must say that this was not what you get when buying record products usually very good"

"Good product bought to replace my old record extractor which I have had for approx 18years.this one seems to be quieter than the old one have used it connected to my band saw And whilst sanding on the lathe and to clean up after ,great product and would recommend to anyone. Only small gripe I have is that when fitting the motor and lid on the drum I found that the drum was not perfectly round and had some difficulty connecting both but a bit of fettling cured it .I must say that this was not what you get when buying record products usually very good"

"Bought this with a bandsaw. Have previously used my lathe, sanders, jigsaws with masks and open doors. The Dx1000 sucks everything up and I feel a lot safer now "

"An excellent machine which I have connected to a DeWalt Circular saw. It is quite loud but hearing protection needed for the saw anyway. Leave extractor running for a minute after cuts and it will pick up dust from the air and keep the shop a bit cleaner."

"Best price I found on the net. A good product that does what it says on the can. Works great with my hobby series products and my Triton bobbin sander, No more clouds of dust in the workshop"

"For my mini woodturning shop, the Record DW 1000 is a great piece of kit. The suction is very strong although the noise is tolerable. I can thoroughly recommend this product. "

"An excellent product at very good price. Does exactly as you might expect ie powerful suction force"

"This is the second one I have bought . I bought a planer thicknesser and needed an additional extractor . The first one does a pretty good job in my small workshop so I bought another one . Very good value for money .I have seen reviews stating that it is noisy All dust extractors are a bit noisy and this one is no louder than most of the ones I have had experience of .Wear ear defenders if you find the noise excessive .The noise has never bothered me as there is always at least one machine running anyway ,so it is not that noticeable . If you only have a small workshop and are only doing hobby stuff or occasional small joinery jobs , this machine will suffice .A full time tradesman's workshop will require something bigger ."

"This is a very powerful extractor. Since buying it I’ve had no dust buildup in my workshop. It is loud, but so are they all, so I would recommend earplugs when using it. Whatever you do, don’t let it get stuck to a floor or bench. The suction is so strong that it will pull the whole extractor from it’s resting place and across the workshop. Overall I’m very happy with the DX1000, the price and the excellent service from Yandles."

"Great product so far. Excellent service, ordered 8.00pm Tuesday arrived first thing Thursday. Can't ask for better than that. Thank you "