Chestnut Shellac Sanding Sealer

Item: SHASS

Write the first review

Available for home delivery

in stock Available

Note: Currently not available for delivery to EU-1, EU-2, EU-3 and EU-4.

Product Description

Cellulose Sanding Sealer

Shellac Sanding Sealer is the traditional way of sealing timber prior to applying a polish or a wax. Our version has a high percentage of real shellac which means it does the job extremely well, dissolved in an ethanol solution to make it easy to apply and quick drying.

Applied by cloth, brush or spray it dries in about 20 minutes, making it very popular for cabinet and architectural work as it is easy to keep a wet edge running. It is also popular with woodturners and highlights the natural grain of the timber extremely well.

Sand back lightly after application and apply Friction Polish, French Polish or any of our waxes on top.

Conforms to EN71 Part 3 – suitable for toys and nursery furniture.

Typical uses	To seal open pores of timber prior to application of lacquers, waxes or polishes. Once dry lightly sand for a smooth surface.
Method of application	Brush, cloth or spray
Drying time	Within five minutes under normal conditions
Coverage	approx. 8-10 m² per litre
Compatibility	Can be used as a basecoat for Melamine Lacquer, Acrylic Gloss Lacquer, Acrylic Lacquer, Ebonising Lacquer, Acrylic Satin Lacquer, WoodWax 22, Woodturner’s Stick Wax, Friction Polish.
Tips	One coat should be sufficient to seal the piece you are working on. Not advisable to apply more than one coat, especially when using a hard topcoat ie lacquers. This product can be tinted using Spirit Stain. Up to 10% of stain can be added to the sealer
Thinners	Cellulose Thinners.
Safety Considerations	Highly Flammable. Our formula does not contain harmful solvents (such as toluene and xylene) but should still be used in a well ventilated place. (see Safety Data Sheet or warnings on can for full details).

View other products in Preparation & Repair »

Specification

Specification

ypical uses

To seal the open pores of wood before applying a finish coat. Can be left as topcoat if required for a low sheen finish but is not hardwearing. Particularly useful when working on large areas (cabinetwork etc) when a large area is to be covered.

Method of application

Brush, cloth or spray.

Drying time

Within 20 minutes

Coverage

6 – 10m² per litre

Compatibility

Can be used under Friction Polish, French Polish and Waxes.

Tips

Do not overbrush as this can cause most of the sealing compound to collect at one end. Lightly sand once dry for a silk smooth finish. Conforms to EN71 for use on toys.

Thinners

Methylated Spirits

Safety Considerations

Highly Flammable (see Safety Data Sheet or warnings on can for full details).