Veritas

The most versatile Veritas honing guide set to date. This 5 piece deluxe honing guide set includes both the standard and narrow blade clamping heads, as well as the angle registration jig, straight roller base and camber roller base. Combined the heads accept blades ranging from 3mm(1/8") to 72mm(2.7/8") wide. The bases offer the options of straight or slightly cambered edges on your blades. The completely...

3-IN-1 BRASS MARKING GAUGE

VERITAS DOWELLING JIG   For centred dowelling or doweling boards to a reference face Micrometer clamp head can be set from 6 to 13mm from the centre line Setting is positive and accurate to a few thousands of an inch Movable clamp heads will grip work as small as 13mm x 35mm Chain drill dowel holes using the tapered pin to register off the last hole drilled Movable bushing carrier includes 3 hardened steel bushings: 1/4", 8mm (5/16"), and 3/8". All aluminium parts anodized black, except the red bushing carrier Register pins and clamping fittings are turned brass

Hardened steel wheel cutter Cuts wood fibres, rather than tears Marks cleanly, even on cross grain The wheel retracts into the face of the gauge for storage and protection The gauges are very easy to set Use as a depth gauge to transfer measurements

VERITAS O1 BULLNOSE PLANE BLADE 05P4252 Lapped to a flatness tolerance of 0.005mm(0.0002") 25.4(1") wide, 3.2mm(1/8") thick

Extremely durable PM-V11 steel alloy At least twice the edge life of A2 steel Highly wear-resistant, yet easy to sharpen Blades lapped to a flatness tolerance of +/-0.0127mm Made in Canada

PM-V11 Blades for Record & Stanley Planes Extremely durable PM-V11 steel alloy At least twice the edge life of A2 steel Highly wear-resistant, yet easy to sharpen Blades lapped to a flatness tolerance of +/-0.0127mm Made in Canada

Extremely durable PM-V11 steel alloy At least twice the edge life of A2 steel Highly wear-resistant, yet easy to sharpen Blades lapped to a flatness tolerance of +/-0.0127mm Made in Canada

Extremely durable PM-V11 steel alloy At least twice the edge life of A2 steel Highly wear-resistant, yet easy to sharpen Blades lapped to a flatness tolerance of +/-0.0127mm Made in Canada

38mm(1.1/2") wide by 4.7mm(3/16") thick Edge is ground with a 75mm(3") radius for an aggressive cut High-carbon steel (HCS) blade (HRC 58-60)

VERITAS ROUTER PLANE BLADE 1/2" STRAIGHT 05P3804

Blade holder may be mounted in a honing guide, or used free hand for sharpening Holds short blades such as spokeshave blades when sharpening Blade is secured in holder by two rare-earth magnets Adjustable stop provides adjustment for blade projection Effectively transforms your short blade into something larger (38 x 100mm long) Made in Canada

The Veritas Bullnose Plane is two planes in one, serving as a bullnose or a chisel plane when required. An adjustable set screw in the toe acts as a stop to accurately set the mouth opening. When you switch configurations, it repositions the toe to the exact opening previously set, so you will never accidentally jam the nose against the blade edge. The plane is 120mm(4.3/4") long by 25mm(1") wide and...

The Low Angle Jack Plane is ideal for shooting mitres, working end grain and initial smoothing. Veritas have designated it as a 62 1/2 because of its generous size, greater weight, low centre of gravity and radically set-back mouth. Measuring 380mm(15") long and 57mm(2.1/4") wide, it weighs just under 2.72kg(6lb.). With sides machined square to the sole, a specially shaped lever cap and machined thumb...

The Veritas Medium Shoulder Plane can be used on end grain (for example, trimming tenon shoulders) or for paring cross grain as is often required on tenon cheeks. It can also be used for rebate work, planing with the grain. This plane measures 178mm long by 17.5mm wide and weighs 906g. If you have ever held a traditional shoulder plane, you will appreciate how this plane comes readily to hand. The...

VERITAS ROUTER PLANE 

This version of the Veritas Small Plough Plane excels at cutting grooves, rebates and tongues. It also has the ability to cut decorative beading. The Veritas Small Plough Plane features a 168mm (6-5/8") long fence that registers solidly to the workpiece. Double guide rods and a special collet locking system prevent the fence from racking. The fence is through-drilled, allowing you to add a wooden fence...

The saw's spine is permanently moulded onto the back of the blade. It imparts just the right amount of weight to the blade to carry the saw effortlessly into the cut. The polished hardwood handle is shaped to fit the hand comfortably and not just to look pretty, which it also does. In fact the handle is very reminiscent of the rear tote on a bench plane and this theme is carried on in the steel rod...

The saw has a 275mm (11") long by 0.5mm thick high-carbon steel blade filed for rip cutting at 12tpi. The teeth have a rake angle of 10°, an included angle of 60° for fast and accurate cutting along the line of the grain. The depth of cut is 60mm. The back of this saw is injection moulded under high pressure onto the blade and stainless-steel handle-mounting bolt. This forms a solid one-piece blade/spine/mount...

Lock the relative position of the two rods Machined to precise tolerances to prevent binding on the rods 13mm long collar is made from extruded aluminium Turned brass thumbscrew Made in Canada