All Hand Planes & Scrapers Blades - Veritas

3-IN-1 BRASS MARKING GAUGE

VERITAS BENCH BLADE Only 6mm tall for better access to your work Thumb-operated eccentric cam lever applies up to 130kg force Jaw face has a 5° inward cant to hold work securely Cam and jaw are cast steel, heat-treated for surface hardness Both fit in a 19mm (3/4") diameter through-hole Wedge-lock version is usable at any angle from horizontal to vertical

VERITAS BLADE FOR TAPERED TENON CUTTER - CURVED

VERITAS DOWELLING JIG   For centred dowelling or doweling boards to a reference face Micrometer clamp head can be set from 6 to 13mm from the centre line Setting is positive and accurate to a few thousands of an inch Movable clamp heads will grip work as small as 13mm x 35mm Chain drill dowel holes using the tapered pin to register off the last hole drilled Movable bushing carrier includes 3 hardened steel bushings: 1/4", 8mm (5/16"), and 3/8". All aluminium parts anodized black, except the red bushing carrier Register pins and clamping fittings are turned brass

Hardened steel wheel cutter Cuts wood fibres, rather than tears Marks cleanly, even on cross grain The wheel retracts into the face of the gauge for storage and protection The gauges are very easy to set Use as a depth gauge to transfer measurements

Available in diameters from 5/16" to 9/16", latter used for chair rungs 1/2" are useful for trellis or lattice work All have a straight blade that cuts a 60° shoulder tenon (not a radiused shoulder tenon) 5/16" size cuts tenons up to 1" long 1/2" and 9/16" sizes cut tenons up to 1.3/8" long A plug gauge is included for easy blade setting, 3/8" round shank

VERITAS MINI TENON CUTTER - 5/16 Available in diameters from 5/16" to 9/16", latter used for chair rungs 1/2" are useful for trellis or lattice work All have a straight blade that cuts a 60° shoulder tenon (not a radiused shoulder tenon) 5/16" size cuts tenons up to 1" long 1/2" and 9/16" sizes cut tenons up to 1.3/8" long A plug gauge is included for easy blade setting, 3/8" round shank

VERITAS O1 BULLNOSE PLANE BLADE 05P4252 Lapped to a flatness tolerance of 0.005mm(0.0002") 25.4(1") wide, 3.2mm(1/8") thick

Extremely durable PM-V11 steel alloy At least twice the edge life of A2 steel Highly wear-resistant, yet easy to sharpen Blades lapped to a flatness tolerance of +/-0.0127mm Made in Canada

PM-V11 Blades for Record & Stanley Planes Extremely durable PM-V11 steel alloy At least twice the edge life of A2 steel Highly wear-resistant, yet easy to sharpen Blades lapped to a flatness tolerance of +/-0.0127mm Made in Canada

Extremely durable PM-V11 steel alloy At least twice the edge life of A2 steel Highly wear-resistant, yet easy to sharpen Blades lapped to a flatness tolerance of +/-0.0127mm Made in Canada

Extremely durable PM-V11 steel alloy At least twice the edge life of A2 steel Highly wear-resistant, yet easy to sharpen Blades lapped to a flatness tolerance of +/-0.0127mm Made in Canada

Cut smooth, perfect tenons with radiused shoulders Cutters run vibration-free while being driven by an electric drill Yield the same accuracy when used with a hand brace Anodised aluminium body has been balanced to eliminate vibration integral level vial makes in-line cutting accurate The back end of the blade is safely contoured to avoid anything extending beyond the revolving body Body has a built-in honing guide for easy sharpening The blade is adjustable to cut the exact size in both dry & green wood. Eight sizes from 5/8" to 1" cut 2.3/4" long tenons Sizes 1.1/4" to 2" will cut 4.1/4" long tenons, for structural connections All have hex shanks; sizes 5/8" to 1" are for use in electric drill with a 3/8" chuck 1/4" to 2", need more torque to drive, use in larger electric drills with a 1/2" chuck

Cut smooth, perfect tenons with radiused shoulders Cutters run vibration-free while being driven by an electric drill Yield the same accuracy when used with a hand brace Anodised aluminium body has been balanced to eliminate vibration integral level vial makes in-line cutting accurate The back end of the blade is safely contoured to avoid anything extending beyond the revolving body Body has a built-in honing guide for easy sharpening The blade is adjustable to cut the exact size in both dry & green wood. Eight sizes from 5/8" to 1" cut 2.3/4" long tenons Sizes 1.1/4" to 2" will cut 4.1/4" long tenons, for structural connections All have hex shanks; sizes 5/8" to 1" are for use in electric drill with a 3/8" chuck 1/4" to 2", need more torque to drive, use in larger electric drills with a 1/2" chuck

Cut smooth, perfect tenons with radiused shoulders Cutters run vibration-free while being driven by an electric drill Yield the same accuracy when used with a hand brace Anodised aluminium body has been balanced to eliminate vibration integral level vial makes in-line cutting accurate The back end of the blade is safely contoured to avoid anything extending beyond the revolving body Body has a built-in honing guide for easy sharpening The blade is adjustable to cut the exact size in both dry & green wood. Eight sizes from 5/8" to 1" cut 2.3/4" long tenons Sizes 1.1/4" to 2" will cut 4.1/4" long tenons, for structural connections All have hex shanks; sizes 5/8" to 1" are for use in electric drill with a 3/8" chuck 1/4" to 2", need more torque to drive, use in larger electric drills with a 1/2" chuck

Cut smooth, perfect tenons with radiused shoulders Cutters run vibration-free while being driven by an electric drill Yield the same accuracy when used with a hand brace Anodised aluminium body has been balanced to eliminate vibration integral level vial makes in-line cutting accurate The back end of the blade is safely contoured to avoid anything extending beyond the revolving body Body has a built-in honing guide for easy sharpening The blade is adjustable to cut the exact size in both dry & green wood. Eight sizes from 5/8" to 1" cut 2.3/4" long tenons Sizes 1.1/4" to 2" will cut 4.1/4" long tenons, for structural connections All have hex shanks; sizes 5/8" to 1" are for use in electric drill with a 3/8" chuck 1/4" to 2", need more torque to drive, use in larger electric drills with a 1/2" chuck

Veritas replacement blade for Veritas power tenon cutters

High carbon steel cutters 6.35mm(1/4") forged straight blade Two-piece 12.7mm(1/2") straight blade Two-piece 12.7mm(1/2") pointed blade (for final smoothing) Two-piece blade for ease of sharpening

High carbon steel cutters 6.35mm(1/4") forged straight blade Two-piece 12.7mm(1/2") straight blade Two-piece 12.7mm(1/2") pointed blade (for final smoothing) Two-piece blade for ease of sharpening

For putting tapered tenons on turnings, dowels or rustic furniture components Straight-edged blade tapers the ends Size given for each cutter is the minimum tenon diameter it will cut; the maximum is 1/2" greater 3/8", 1/2" and 5/8" sizes will cover most tenoning requirements for typical chair-making The curved blade (for dowel making) should be used with only the three smallest sizes

For putting tapered tenons on turnings, dowels or rustic furniture components Straight-edged blade tapers the ends Size given for each cutter is the minimum tenon diameter it will cut; the maximum is 1/2" greater 3/8", 1/2" and 5/8" sizes will cover most tenoning requirements for typical chair-making The curved blade (for dowel making) should be used with only the three smallest sizes