Tormek Diamond Wheels 200mm / 250mm To Fit T8 / T4

New
Tormek Tormek Diamond Wheels 200mm / 250mm To Fit T8 / T4

Item: TORDIAMOND

available Available for home delivery

Choose Grit:
Choose Size:
from £149.99 inc VAT

add to wish list
updown

Product Description

Tormek Diamond Wheels

Choose your grade / size above

Tormek, already one of the most versatile and comprehensive sharpening systems now has even more potential. These Tormek diamond-grinding wheels offer huge benefits: exceptional durability and the ability to sharpen on the flat side as well as the periphery. Used together with MB-100 multi-base you can sharpen on the side of the diamond wheel to produce a completely flat bevel, which may be preferable in some cases. In addition, these diamond grinding wheels will never require dressing and will always retain their original diameter.The quality of the diamond surface provides high quality and consistent finish to your edge tools. Diamond is the world's hardest material and almost twice as hard as cubic boron nitride (CBN). Diamond's extreme hardness and durability make it the ultimate abrasive material for sharpening. Although the wheels work perfectly well dry, Tormek recommend using water as it gives a much better result. The Tormek Coarse diamond grinding wheel has a grit size of 360 mesh. It can quickly restore a badly dulled tool and remove a nick or ding from an edge.You can sharpen all types of material, including steel, ceramic, and tungsten carbide. These wheels fit Tormek T-8, Tormek T-7 and previous models Tormek 2000 - 2006 with a 250mm stone diameter.

NEW 200mm wheels to fit Tormek t4 - Now available

 

Customer Reviews

By on
"The biggest advantage of the diamond wheels over the standard one is that the diameter remains the same throughout the life of the wheel. This makes setting up the jigs very much easier and more accurate. I also had to but a new stainless steel shaft as the old wheel had corroded / rusted onto the original shaft and was irremovable by all means short of smashing the stone - a grave error by Tormek with the early machines. The machine is a WET grinder - yet they didn't use stainless steel! But the new shaft, locking screw and middle grit diamond stone mean I now have a sharpener that can truly live up to the potential promised by a Tormek. The ability to grind flat on the side of the stone is a very welcome bonus - I may well get the necessary jig for that too. "
Star Rating 5
By on
"Fantastic wheel, I bought it to cut down on the time it takes to redress things like the plane iron on my Lie Nielsen number 7 which would take an age with the standard fit SG250 stone."
Star Rating 5
By on
"Wheel is truer and better than I was expecting. I use the course wheel rather than a high speed grinder for an initial grind. Its quick accurate and no chance of a burn. Still use a stone for sharpening"
Star Rating 5
By on
"The four stars are not indicative of the Tormek diamond wheel which is excellent, it is for the fact that the order for the diamond wheel was forwarded to Brimarc for fulfilment. The whole delivery time went on for nearly a month, due to the fact that Brimarc had them on back order, did not tell Yandles or myself, eventually arrived and my thanks to Sam who followed up my enquiries due to delay with Brimarc and kept me updated."
Star Rating 4
By on
"Excellent product, fantastic service. Well done Yandle"
By on
"Just finished sharpening my whole range of Woodturners chisels. Very pleased with the results ."
Star Rating 5
By on
"No more dressing the wheel, great bit of kit as you would expect from Tormek"
Star Rating 5

DE-250

  • Diamond-grinding wheels for exceptional durability
  • Extra Fine 1,200 grit for refined and polished edge
  • Sharpens on the flat side as well as the periphery
  • Use with MB-100 multi base to produce a completely flat bevels
  • Never requires re-truing
  • Always retains original diameter
  • Diamond surface provides a high quality and consistent finish
  • Sharpens steel, ceramic, and tungsten carbide
  • Fits 250mm Tormek machines: T-8, T-7 and 2000 – 2006

DC-250

  • Diamond grinding wheels for exceptional durability
  • Coarse 360 grit quickly restores dull edges and removes nicks on edge
  • Sharpens on the flat side as well as the periphery
  • Use with MB-100 multi base to produce a completely flat bevels
  • Never requires dressing
  • Always retains original diameter
  • Diamond surface provides a high quality and consistent finish
  • Sharpens steel, ceramic, and tungsten carbide
  • Fits 250mm Tormek machines: T-8, T-7 and 2000 – 2006

DF-250

  • Diamond-grinding wheels for exceptional durability
  • Fine 600 grit for efficient steel removal with smooth surface finish
  • Sharpens on the flat side as well as the periphery
  • Use with MB-100 multi base to produce a completely flat bevels
  • Never requires dressing
  • Always retains original diameter
  • Diamond surface provides a high quality and consistent finish
  • Sharpens steel, ceramic, and tungsten carbide
  • Fits 250mm Tormek machines: T-8, T-7 and 2000 – 2006
Collect in Store

This item is available for collection.

Home Delivery

UK mainland delivery from £6.99

check delivery cost

You Can Also...

Get help, write a review or share this product...

ask a questionwrite a reviewprint this pagebookmark and share

People who bought this also bought...



Copper Tealight Cup
Sold Out
Copper Tealight Cup
£1.50 inc VAT

Tormek MB-100 Multi BaseTormek MB-100 Multi Base
New
Tormek MB-100 Multi Base
£59.99 inc VAT