• display as grid Grid
  • display as list List
Page: | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | | Last

RECORD POWER 3/8" PARTING AND BEADING
RECORD POWER 3/8" PARTING AND BEADING
Mainly profiled for the parting off of workpieces, this tool is now commonly used for the turning of beads, notches and “V” grooves on all spindle work. Faces are ground square to enable true vertical and parting cuts.
£28.99 inc VAT
Robert Sorby 830H 1/8' (3mm) Standard Parting Tool, 8 1/2' (216mm) Handle
Robert Sorby 830H 1/8' (3mm) Standard Parting Tool, 8 1/2' (216mm) Handle
Parting tools are primarily used for parting off projects. The thinner section tools are particular beneficial when using the more exotic woods. However, parting tools may also be used to provide thin banded decorations on turnings
£32.99 inc VAT

Robert Sorby 831H 3/16' (5mm) Diamond Section Parting Tool, 10' (254mm) Handle
Robert Sorby 831H 3/16' (5mm) Diamond Section Parting Tool, 10' (254mm) Handle
The shape of the Diamond Parting Tools prevents both binding in the cut and heat build-up which may lead to burning of the project..
£59.99 inc VAT
Robert Sorby 832H 1/16' (2mm) Fluted Parting Tool, 12' (305mm) Handle
Robert Sorby 832H 1/16' (2mm) Fluted Parting Tool, 12' (305mm) Handle
This tool has a milled flute running along the bottom edge, creating two sharp spurs at the cutting face. These sever the fibres to produce a burnished finish. The tapered profile also reduces the risk of binding in the cut. This features a radically new and unique cutting profile with a blade profile of only 2mm. The long bevel has a milled flute which is the cutting face. The small bevel his...
£48.99 inc VAT

Robert Sorby 833H 3/8' (10mm) Beading and Parting Tool, 12' (305mm) Handle
Robert Sorby 833H 3/8' (10mm) Beading and Parting Tool, 12' (305mm) Handle
The Beading and Parting Tool is extremely versatile. Its finesse allows for the production of beads whilst it can also be used for conventional parting off. Its more massive section makes it much more rigid and hence it is ideal for making spigots.
£38.99 inc VAT
Robert Sorby 865H 1/16' (2mm) Micro Parting Tool, 6 1/4' (159mm) Handle
Robert Sorby 865H 1/16' (2mm) Micro Parting Tool, 6 1/4' (159mm) Handle
Part of the micro turning tool range, here is a 1/16" Parting tool.
£22.99 inc VAT

Robert Sorby 888/3- Modular Micro Parting Tool 1/16'
New
Robert Sorby 888/3- Modular Micro Parting Tool 1/16'
A smaller version of the full size diamond parting tool, the special profile of this tool reduces the risk of binding in the cut. It also reduces the amount of heat build-up caused by friction, thereby lessening the chance of burning the bottom of the parted-off project. Possesses a fine 2mm cutting edge.
£13.99 inc VAT

840-Excelsior Spindle Gouge 1/2 UNHANDLED
840-Excelsior Spindle Gouge 1/2 UNHANDLED
840-Excelsior Spindle Gouge 1/2
£31.99 inc VAT

840-Excelsior Spindle Gouge 1/4 UNHANDLED
840-Excelsior Spindle Gouge 1/4 UNHANDLED
840-Excelsior Spindle Gouge 1/4
£19.99 inc VAT
840-Excelsior Spindle Gouge 3/8 UNHANDLED
840-Excelsior Spindle Gouge 3/8 UNHANDLED
840-Excelsior Spindle Gouse 3/8
£24.99 inc VAT

840GH-Excelsior Spindle Gouge 1/2
840GH-Excelsior Spindle Gouge 1/2
840GH-Excelsior Spindle Gouge 1/2
£39.99 inc VAT
840GH-Excelsior Spindle Gouge 1/4
840GH-Excelsior Spindle Gouge 1/4
840GH-Excelsior Spindle Gouge 1/4 We have created an increased edge life by bonding Titanium Nitride to our existing HSS tools. Sharpen in the same way as a regular spindle gouge.
£27.99 inc VAT

840GH-Excelsior Spindle Gouge 3/8
840GH-Excelsior Spindle Gouge 3/8
840GH-Excelsior Spindle Gouge 3/8 We have created an increased edge life by bonding Titanium Nitride to our existing HSS tools. Sharpen in the same way as a regular spindle gouge.
£31.99 inc VAT
842F-Fingernail Bowl Gouge HSS 1/2' UNHANDLED
New
842F-Fingernail Bowl Gouge HSS 1/2' UNHANDLED
The fingernail shape of this gouge increases flexibility allowing the turner to perform 'pull cuts' without catching the lathe bed. The greater cutting area can be used equally well for heavy profiling cuts or fine, delicate shearing cuts. Easily maintained using the Robert Sorby ProEdge sharpening system.
£52.99 inc VAT


Crown 236KW 3/8" (10mm) Cryogenic HSS Spindle Gouge 10" (254mm) Handle, Black Ash
Crown 236KW 3/8" (10mm) Cryogenic HSS Spindle Gouge 10" (254mm) Handle, Black Ash
Now with the addition of Cryogenically Treated HSS our range of milled regular English gouges will stay sharp longer, for all Spindle work requirements. Crown Cryogenic Treatment: please follow this link for more information on these tools
£25.99 inc VAT

Crown 237KW 1/2" (13mm) Cryogenic HSS Spindle Gouge 10" (254mm) Handle, Black Ash
Crown 237KW 1/2" (13mm) Cryogenic HSS Spindle Gouge 10" (254mm) Handle, Black Ash
Crown Cryogenic Treatment: please follow this link for more information on these tools
£30.99 inc VAT

RECORD POWER 1/2" SPINDLE GOUGE
RECORD POWER 1/2" SPINDLE GOUGE
Ideal for producing coves in spindles and general purpose work between centres.
£24.99 inc VAT
RECORD POWER 1/4" SPINDLE GOUGE
RECORD POWER 1/4" SPINDLE GOUGE
Ideal for producing coves in spindles and general purpose work between centres.
£19.99 inc VAT

RECORD POWER 3/8" SPINDLE GOUGE
RECORD POWER 3/8" SPINDLE GOUGE
Ideal for producing coves in spindles and general purpose work between centres.
£22.99 inc VAT
Robert Sorby 839H Continental Style Spindle Gouge, 10' (254mm) Handle
Robert Sorby 839H Continental Style Spindle Gouge, 10' (254mm) Handle
Continental spindle gouges - the name derives from the fact that it is widely used in continental Europe - are renowned for their handlability. Their construction means that they have an even wall thickness. This in turn gives them increased finesse without any compromise in strength. The 8mm and 12mm are extremely popular with those wanting to create very fine detail on spindle-work. Available...
£32.99 inc VAT

Robert Sorby 840-Spindle Gouge HSS 1/2' unhandled
Robert Sorby 840-Spindle Gouge HSS 1/2' unhandled
These are detailing tools used on between-centre work, where the grain is running parallel to the lathe bed. Spindle gouges are used to create coves, beads and other profiles on goblets, vases, bed posts, candle sticks and other spindle projects.
£26.99 inc VAT
Robert Sorby 840-Spindle Gouge HSS 1/4' Unhandled
Robert Sorby 840-Spindle Gouge HSS 1/4' Unhandled
These are detailing tools used on between-centre work, where the grain is running parallel to the lathe bed. Spindle gouges are used to create coves, beads and other profiles on goblets, vases, bed posts, candle sticks and other spindle projects.
£17.99 inc VAT

Robert Sorby 840F-Fingernail Spindle Gouge HSS 1/2' unhandled
Robert Sorby 840F-Fingernail Spindle Gouge HSS 1/2' unhandled
Ideal for fine detailing on spindle work. Having the wing tips ground back reduces the danger of them catching when working in confined areas. Easily maintained and sharpened using the Robert Sorby ProEdge sharpening system
£26.99 inc VAT
Robert Sorby 840FH 3/8' (10mm) Fingernail Spindle Gouge, 10' (254mm) Handle
Robert Sorby 840FH 3/8' (10mm) Fingernail Spindle Gouge, 10' (254mm) Handle
The fingernail spindle gouges are ideal for fine detailing on spindle work. Having the wing tips ground back reduces the danger of them catching whilst working
£27.99 inc VAT


Robert Sorby 862H 1/8' (3mm) Micro Spindle Gouge, 6 1/4' (159mm) Handle
Robert Sorby 862H 1/8' (3mm) Micro Spindle Gouge, 6 1/4' (159mm) Handle
Part of the micro turning tool range, here is a 1/8" spindle gouge.
£24.99 inc VAT

Robert Sorby MICRO SPINDLEMASTER - 888/2
New
Robert Sorby MICRO SPINDLEMASTER - 888/2
A miniature version of its versatile big brother – the modular micro Spindlemaster can be used to plane, bead, cove and trim end grain. It’s easy to use and easy to sharpen, and like the larger version, the polished back bevel helps to produce a high quality finish. Delivers exceptional results on all timbers.
£21.99 inc VAT
842F-Fingernail Bowl Gouge HSS 1/4' UNHANDLED
New
842F-Fingernail Bowl Gouge HSS 1/4' UNHANDLED
The fingernail shape of this gouge increases flexibility allowing the turner to perform 'pull cuts' without catching the lathe bed. The greater cutting area can be used equally well for heavy profiling cuts or fine, delicate shearing cuts. Easily maintained using the Robert Sorby ProEdge sharpening system.
£28.99 inc VAT

Crown 240KW 1/4" (6mm) Cryogenic HSS Bowl Gouge 14" (354mm) Handle, Black Ash
Crown 240KW 1/4" (6mm) Cryogenic HSS Bowl Gouge 14" (354mm) Handle, Black Ash
Crown Cryogenic Treatment: please follow this link for more information on these tools
£36.99 inc VAT

Crown 241KW 3/8" (10mm) Cryogenic HSS Bowl Gouge 14" (354mm) Handle, Black Ash
Crown 241KW 3/8" (10mm) Cryogenic HSS Bowl Gouge 14" (354mm) Handle, Black Ash
Crown Cryogenic Treatment: please follow this link for more information on these tools
£40.99 inc VAT
Crown 241SKW 3/8" (10mm) Cryogenic HSS Short Bowl Gouge 10" (254mm) Handle, Black Ash
Crown 241SKW 3/8" (10mm) Cryogenic HSS Short Bowl Gouge 10" (254mm) Handle, Black Ash
Crown Cryogenic Treatment: please follow this link for more information on these tools
£38.99 inc VAT


Crown 242KW 1/2" (13mm) Cryogenic HSS Bowl Gouge 14" (354mm) Handle, Black Ash
Crown 242KW 1/2" (13mm) Cryogenic HSS Bowl Gouge 14" (354mm) Handle, Black Ash
Crown Cryogenic Treatment: please follow this link for more information on these tools
£48.99 inc VAT

RECORD POWER 1/2" DEEP BOWL GOUGE
RECORD POWER 1/2" DEEP BOWL GOUGE
This balanced bowl gouge is ideal for all aspects of bowl and goblet turning whether on the internal or external faces of the workpiece. Fitted with a 16” handle and 9 1⁄4” blade it is easy to achieve the required sweep, even when taking heavy cuts to hollow out the centre of a bowl for example. The very solid section of HSS minimises chatter and vibration.
£39.99 inc VAT
RECORD POWER 1/4" DEEP BOWL GOUGE
RECORD POWER 1/4" DEEP BOWL GOUGE
This balanced bowl gouge is ideal for all aspects of bowl and goblet turning whether on the internal or external faces of the workpiece. Fitted with a 16” handle and 9 1⁄4” blade it is easy to achieve the required sweep, even when taking heavy cuts to hollow out the centre of a bowl for example. The very solid section of HSS minimises chatter and vibration.
£19.99 inc VAT

RECORD POWER 3/8" DEEP BOWL GOUGE
RECORD POWER 3/8" DEEP BOWL GOUGE
This balanced bowl gouge is ideal for all aspects of bowl and goblet turning whether on the internal or external faces of the workpiece. Fitted with a 16” handle and 9 1⁄4” blade it is easy to achieve the required sweep, even when taking heavy cuts to hollow out the centre of a bowl for example. The very solid section of HSS minimises chatter and vibration.
£29.99 inc VAT
RECORD POWER FINGERNAIL PROFILE BOWL GOUGE (1/2" BAR DIAMETER - 3/8" FLUTE)
RECORD POWER FINGERNAIL PROFILE BOWL GOUGE (1/2" BAR DIAMETER - 3/8" FLUTE)
This profile helps increase control and overall ease of use compared to standard bowl gouges. It is possible to use the tip or side of the profile for varying cuts.
£42.99 inc VAT
Page: | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | | Last