• display as grid Grid
  • display as list List
Page: | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | | Last

EASY WOOD TOOLS PRO EASY HOLLOWER #3
EASY WOOD TOOLS PRO EASY HOLLOWER #3
PRO EASY HOLLOWER #3 Best tool for under-cutting hollow forms The Easy Hollower was designed to offer a revolutionary new approach to turning hollow forms. These patended tools allow any skill level to achieve professional results for hollowing work with minimum effort and worry. Choose a Hollower for undercutting the rim of hollow forms Utilizes our proven round carbide cutters The True Curve...
£149.99 inc VAT
Robert Sorby 850H 3/8' x 3' (10 x 76mm) Hollowing Tool, Handled
Robert Sorby 850H 3/8' x 3' (10 x 76mm) Hollowing Tool, Handled
One piece construction Min aperture: 3/8" Max depth: 3"
£35.99 inc VAT

Robert Sorby 855H 1/2' x 5 1/2' (13 x 140mm) Hollowing Tool, Handled
Robert Sorby 855H 1/2' x 5 1/2' (13 x 140mm) Hollowing Tool, Handled
A very versatile, general purpose hollower. Ideal for under-cutting. Fitted with a replaceable HSS tip (851C).nMin aperture: 1/2" Max depth: 6"
£39.99 inc VAT

Robert Sorby RS130KT Midi Hollowmaster, HANDLED
Robert Sorby RS130KT Midi Hollowmaster, HANDLED
Downsized from the original Hollowmaster this version has a 1/2" shank with a flat underside and can reach up to 6" inside a vessel for hollowing. Comes with two cutters (RS130C & RS111C)
£52.99 inc VAT

Robert Sorby RS230KT Hollowmaster, 14' (354mm) Handle
Robert Sorby RS230KT Hollowmaster, 14' (354mm) Handle
If even more access under the rim is required then the swan-necked Hollowmaster is an ideal complement to the Multi Tipped Hollowing Tool. This works on much the same principle. it has a flat working surface for stability, a hollowing cutter in an adjustable washer and also has an internal scraper cutter. Cutters are sharpened with a diamond hone. Full size Hollowmaster is 22" long and midi-size is...
£63.99 inc VAT

Robert Sorby SOV-12S 12' Sovereign System (inc Tang & 3/8' collet adaptors)
Robert Sorby SOV-12S 12' Sovereign System (inc Tang & 3/8' collet adaptors)
Sovereign 12 inch handle, designed with the spindle turner in mind. The handle accepts a range of 5/8” tool shanks and comes complete with the tang collet and a 3/8” collet to allow a huge selection of tools to be used. Features include:• Fitting of all 5/8” round bar tools as well as the huge selection of tang tools• Interchangeable with existing ½” and...
£47.99 inc VAT
Robert Sorby Turnmaster Tip Holder For Sharpening
Robert Sorby Turnmaster Tip Holder For Sharpening
No more ground finger ends, just bolt your tips to aid with sharpening.
£7.99 inc VAT


TurnMaster Excelsior box / dovetail cutter
TurnMaster Excelsior box / dovetail cutter
Titanium Nitride (TiN) Plasma Bonded Coating box / dovetail cutter. TiN is bonded onto quality HSS. It provides the same advantages as HSS whilst enhancing the cutting life close to that of tungsten carbide. Use the same traditional sharpening equipment used for HSS. Sharpens to 0.12-0.2 microns. Harness of coating up to 85RC. Material is Titanium Nitride on M2 HSS. Better used for parrallel side walls,...
£12.99 inc VAT
TurnMaster Excelsior detail point cutter
TurnMaster Excelsior detail point cutter
Titanium Nitride (TiN) Plasma Bonded Coating detail point cutter. TiN is bonded onto quality HSS. It provides the same advantages as HSS whilst enhancing the cutting life close to that of tungsten carbide. Use the same traditional sharpening equipment used for HSS. Sharpens to 0.12-0.2 microns. Harness of coating up to 85RC. Material is Titanium Nitride on M2 HSS. Better used forline detailing and...
£12.99 inc VAT

TurnMaster Excelsior French curve / inside cutter
TurnMaster Excelsior French curve / inside cutter
Titanium Nitride (TiN) Plasma Bonded Coating french curve inside cutter. TiN is bonded onto quality HSS. It provides the same advantages as HSS whilst enhancing the cutting life close to that of tungsten carbide. Use the same traditional sharpening equipment used for HSS. Sharpens to 0.12-0.2 microns. Harness of coating up to 85RC. Material is Titanium Nitride on M2 HSS. Better used for internal shaping...
£12.99 inc VAT
TurnMaster Excelsior Mushroom Cutter
TurnMaster Excelsior Mushroom Cutter
Titanium Nitride (TiN) Plasma Bonded Coating mushroom cutter. TiN is bonded onto quality HSS. It provides the same advantages as HSS whilst enhancing the cutting life close to that of tungsten carbide. Use the same traditional sharpening equipment used for HSS. Sharpens to 0.12-0.2 microns. Harness of coating up to 85RC. Material is Titanium Nitride on M2 HSS. Better used for undercutting small hollow...
£12.99 inc VAT

TurnMaster Excelsior round cutter
TurnMaster Excelsior round cutter
Titanium Nitride (TiN) Plasma Bonded Coating round cutter. TiN is bonded onto quality HSS. It provides the same advantages as HSS whilst enhancing the cutting life close to that of tungsten carbide. Use the same traditional sharpening equipment used for HSS. Sharpens to 0.12-0.2 microns. Harness of coating up to 85RC. Material is Titanium Nitride on M2 HSS. Better used for internal waste removal, shaping...
£12.99 inc VAT

TurnMaster Excelsior teardrop / inside cutter
TurnMaster Excelsior teardrop / inside cutter
Titanium Nitride (TiN) Plasma Bonded Coating teardrop inside / outside cutter. TiN is bonded onto quality HSS. It provides the same advantages as HSS whilst enhancing the cutting life close to that of tungsten carbide. Use the same traditional sharpening equipment used for HSS. Sharpens to 0.12-0.2 microns. Harness of coating up to 85RC. Material is Titanium Nitride on M2 HSS. Perfect for scraping...
£12.99 inc VAT
TurnMaster handled with detail point tungsten carbide cutter
TurnMaster handled with detail point tungsten carbide cutter
The concept: "We started by wanting to offer a tool that supports our vision for woodturners. It had to be flexible and it had to offer quick and easily achievable results. It also had to enlighten turners to the various materials available and what can be expected from them. We wanted to develop a tool that introduces people to woodturning while at the same time providing a quick and simple solution...
£85.99 inc VAT

TurnMaster handled with Hss Cutters1,2 and 3
New
TurnMaster handled with Hss Cutters1,2 and 3
The concept: "We started by wanting to offer a tool that supports our vision for woodturners. It had to be flexible and it had to offer quick and easily achievable results. It also had to enlighten turners to the various materials available and what can be expected from them. We wanted to develop a tool that introduces people to woodturning while at the same time providing a quick and simple solution...
£95.99 inc VAT
TurnMaster handled with round tungsten carbide cutter
TurnMaster handled with round tungsten carbide cutter
The concept: "We started by wanting to offer a tool that supports our vision for woodturners. It had to be flexible and it had to offer quick and easily achievable results. It also had to enlighten turners to the various materials available and what can be expected from them. We wanted to develop a tool that introduces people to woodturning while at the same time providing a quick and simple solution...
£85.99 inc VAT

TurnMaster handled with square tungsten carbide cutter
TurnMaster handled with square tungsten carbide cutter
The concept: "We started by wanting to offer a tool that supports our vision for woodturners. It had to be flexible and it had to offer quick and easily achievable results. It also had to enlighten turners to the various materials available and what can be expected from them. We wanted to develop a tool that introduces people to woodturning while at the same time providing a quick and simple solution...
£85.99 inc VAT
TurnMaster head only
TurnMaster head only
The concept: "We started by wanting to offer a tool that supports our vision for woodturners. It had to be flexible and it had to offer quick and easily achievable results. It also had to enlighten turners to the various materials available and what can be expected from them. We wanted to develop a tool that introduces people to woodturning while at the same time providing a quick and simple solution...
£20.99 inc VAT

TurnMaster HSS box / dovetail cutter
TurnMaster HSS box / dovetail cutter
High speed steel box / dovetail cutter. This super fine grain structure will provide a razor sharp edge. The result is a superior finish to your turning projects and less need for sanding. Can easily be sharpened on traditional sharpening machines such as the Robert Sorby ProEdge or bench grinders. Sharpens to 0.2 - 0.4 microns. Hardness 62RC. Material M2 HSS. Better used for parallel side walls. Perfect...
£9.99 inc VAT
TurnMaster HSS Detail point cutter
TurnMaster HSS Detail point cutter
High speed steel detail point cutter. This super fine grain structure will provide a razor sharp edge. The result is a superior finish to your turning projects and less need for sanding. Can easily be sharpened on traditional sharpening machines such as the Robert Sorby ProEdge or bench grinders. Sharpens to 0.2 - 0.4 microns. Hardness 62RC. Material M2 HSS. Better used for line detailing and finishing.
£9.99 inc VAT

TurnMaster HSS French curve/inside cutter
TurnMaster HSS French curve/inside cutter
High speed steel french curver inside cutter. This super fine grain structure will provide a razor sharp edge. The result is a superior finish to your turning projects and less need for sanding. Can easily be sharpened on traditional sharpening machines such as the Robert Sorby ProEdge or bench grinders. Sharpens to 0.2 - 0.4 microns. Hardness 62RC. Material M2 HSS. Better used for internal shaping...
£9.99 inc VAT
TurnMaster HSS mushroom cutter
TurnMaster HSS mushroom cutter
High speed steel mushroom cutter. This super fine grain structure will provide a razor sharp edge. The result is a superior finish to your turning projects and less need for sanding. Can easily be sharpened on traditional sharpening machines such as the Robert Sorby ProEdge or bench grinders. Sharpens to 0.2 - 0.4 microns. Hardness 62RC. Material M2 HSS. Better used for undercutting small hollow forms.
£9.99 inc VAT

TurnMaster HSS round cutter
TurnMaster HSS round cutter
High speed steel round cutter. This super fine grain structure will provide a razor sharp edge. The result is a superior finish to your turning projects and less need for sanding. Can easily be sharpened on traditional sharpening machines such as the Robert Sorby ProEdge or bench grinders. Sharpens to 0.2 - 0.4 microns. Hardness 62RC. Material M2 HSS. Better used for internal waste removal, shaping...
£9.99 inc VAT
TurnMaster HSS square cutter
TurnMaster HSS square cutter
High speed steel square cutter. This super fine grain structure will provide a razor sharp edge. The result is a superior finish to your turning projects and less need for sanding. Can easily be sharpened on traditional sharpening machines such as the Robert Sorby ProEdge or bench grinders. Sharpens to 0.2 - 0.4 microns. Hardness 62RC. Material M2 HSS. Better used for external waste removal, straight...
£9.99 inc VAT

TurnMaster HSS teardrop / outside cutter
TurnMaster HSS teardrop / outside cutter
High speed steel teardrop cutter. This super fine grain structure will provide a razor sharp edge. The result is a superior finish to your turning projects and less need for sanding. Can easily be sharpened on traditional sharpening machines such as the Robert Sorby ProEdge or bench grinders. Sharpens to 0.2 - 0.4 microns. Hardness 62RC. Material M2 HSS. Perfect for scraping / shear scraping inside...
£9.99 inc VAT
TurnMaster shank with detail point tungsten carbide cutter
TurnMaster shank with detail point tungsten carbide cutter
The concept: "We started by wanting to offer a tool that supports our vision for woodturners. It had to be flexible and it had to offer quick and easily achievable results. It also had to enlighten turners to the various materials available and what can be expected from them. We wanted to develop a tool that introduces people to woodturning while at the same time providing a quick and simple solution...
£77.99 inc VAT

TurnMaster shank with round tungsten carbide cutter
TurnMaster shank with round tungsten carbide cutter
The concept: "We started by wanting to offer a tool that supports our vision for woodturners. It had to be flexible and it had to offer quick and easily achievable results. It also had to enlighten turners to the various materials available and what can be expected from them. We wanted to develop a tool that introduces people to woodturning while at the same time providing a quick and simple solution...
£77.99 inc VAT
TurnMaster shank with square tungsten carbide cutter
TurnMaster shank with square tungsten carbide cutter
The concept: "We started by wanting to offer a tool that supports our vision for woodturners. It had to be flexible and it had to offer quick and easily achievable results. It also had to enlighten turners to the various materials available and what can be expected from them. We wanted to develop a tool that introduces people to woodturning while at the same time providing a quick and simple solution...
£77.99 inc VAT

TurnMaster tungsten carbide detail point cutter
TurnMaster tungsten carbide detail point cutter
Tungsten Carbide square cutter. Tungsten Carbide makes light work of tough materials and is an extremely hard wearing and long lasting material. Although designed as a throwaway item it can be sharpenied on specialist equipment such as the Robert Sorby ProEdge system with a Diamond Belt. Sharpens to 0.7 microns. Hardness is 90RC. Material is micro grade tungsten carbide. Better used for initial external...
£13.99 inc VAT
TurnMaster tungsten carbide square cutter
TurnMaster tungsten carbide square cutter
Tungsten Carbide detail point cutter. Tungsten Carbide makes light work of tough materials and is an extremely hard wearing and long lasting material. Although designed as a throwaway item it can be sharpenied on specialist equipment such as the Robert Sorby ProEdge system with a Diamond Belt. Sharpens to 0.7 microns. Hardness is 90RC. Material is micro grade tungsten carbide. Better used for line...
£13.99 inc VAT

Crown 2565KW 1" (25mm) X 3/8" (10mm) Cryogenic HSS Bowl Finishing Scraper 14" (354mm) Handle, Black
Crown 2565KW 1" (25mm) X 3/8" (10mm) Cryogenic HSS Bowl Finishing Scraper 14" (354mm) Handle, Black
The perfect tool for removing ridges on the inside of bowls. Now Cryogenically treated for longer lasting performance. Crown Cryogenic Treatment: please follow this link for more information on these tools
£58.99 inc VAT

Crown 2565W 1" (25mm) X 3/8" (10mm) Bowl Finishing Scraper 14" (354mm) Handle, Beech
Crown 2565W 1" (25mm) X 3/8" (10mm) Bowl Finishing Scraper 14" (354mm) Handle, Beech
The perfect tool for removing ridges on the inside of bowls.
£46.99 inc VAT
Crown 260KW 1/2" (13mm) Cryo Round Nose Scraper 8 1/2" (216mm) Handle, Black Ash
Best Seller
Crown 260KW 1/2" (13mm) Cryo Round Nose Scraper 8 1/2" (216mm) Handle, Black Ash
It has long been understood that by subjecting metal tools to elevated temperatures and then rapidly cooling them, the properties of the metal can be altered. This happens because the crystal structure of the metal is altered to change the way the metal reacts when in use. The two main crystals in tooling steel are the larger and softer austenite and the smaller, more stable martensite. Through...
£30.99 inc VAT

Crown 261KW 3/4" (19mm) Cryo Round Nose Scraper 8 1/2" (216mm) Handle, Black Ash
Crown 261KW 3/4" (19mm) Cryo Round Nose Scraper 8 1/2" (216mm) Handle, Black Ash
It has long been understood that by subjecting metal tools to elevated temperatures and then rapidly cooling them, the properties of the metal can be altered. This happens because the crystal structure of the metal is altered to change the way the metal reacts when in use. The two main crystals in tooling steel are the larger and softer austenite and the smaller, more stable martensite. Through...
£33.99 inc VAT


Crown 267KW Cryo Dovetail Scraper, 10" 254mm Black Ash Handle
Crown 267KW Cryo Dovetail Scraper, 10" 254mm Black Ash Handle
This tool is specially designed for making accurate recesses to accommodate the jaws of an expanding Dovetail Chuck. It has long been understood that by subjecting metal tools to elevated temperatures and then rapidly cooling them, the properties of the metal can be altered. This happens because the crystal structure of the metal is altered to change the way the metal reacts when in use. ...
£35.99 inc VAT

Crown 267W Dovetail Scraper, 10" 254mm Beech Handle
Crown 267W Dovetail Scraper, 10" 254mm Beech Handle
This tool is specially designed for making accurate recesses to accommodate the jaws of an expanding Dovetail Chuck.
£25.99 inc VAT
RECORD POWER 1" DOMED SCRAPERS
RECORD POWER 1" DOMED SCRAPERS
This tool is made from a heavy section of HSS to minimise chatter and vibration and is ideal for cleaning up the insides of bowls, for example removing gouge marks, working from the centre outwards.
£39.99 inc VAT
Page: | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | | Last