RECORD POWER TUBULAR BOWL TURNING REST 3/4' Stem
WA180 Tubular Curved Tool Rest for Bowl Turning
A superb addition to any woodturner’s accessory drawer. A replacement for the standard toolrest, enabling the tool to be positioned and supported extremely close to the work piece.
Robert Sorby 1/2' Modular Tool Rest Stem
A 1/2" tool rest stem. This stem system enables the turner to build up a collection of tool rests without going to great expense.
Robert Sorby 765/S16 5/8' (16mm) Stem, for Sorby Modular Toolrest System
A tool rest stem to fit directly into your lathe to hold the numerous cross bars and box scraper platform.
Robert Sorby 765/S19 3/4' (19mm) Stem, for Sorby Modular Toolrest System
A tool rest stem to fit directly into your lathe to hold the numerous cross bars and box scraper platform.
Robert Sorby 765/S22 7/8' (22mm) Stem, for Sorby Modular Toolrest System
A tool rest stem to fit directly into your lathe to hold the numerous cross bars and box scraper platform.
Robert Sorby 765/S24 1' (25.4mm) Stem, for Sorby Modular Toolrest System
A tool rest stem to fit directly into your lathe to hold the numerous cross bars and box scraper platform.
Robert Sorby 765/S25 25mm Stem, for Sorby Modular Toolrest System
A tool rest stem to fit directly into your lathe to hold the numerous cross bars and box scraper platform.
Robert Sorby 765/S28 28mm Stem, for Sorby Modular Toolrest System
A tool rest stem to fit directly into your lathe to hold the numerous cross bars and box scraper platform.
Robert Sorby 765/S30 30mm Stem, for Sorby Modular Toolrest System
A tool rest stem to fit directly into your lathe to hold the numerous cross bars and box scraper platform.
Robert Sorby 766/4 4' (100mm) Crossbar, for Sorby Modular Toolrest System
These crossbars are specially hardened to avoid those irritating little nicks, so that your tool moves along smoothly. Available in 4", 6" and 9" lengths.
Robert Sorby 766/6 6' (150mm) Crossbar, for Sorby Modular Toolrest System
These crossbars are specially hardened to avoid those irritating little nicks, so that your tool moves along smoothly. Available in 4", 6" and 9" lengths.
Charnwood BS410F Floor Stand
Floor stand to mount Charnwood BS410 bandsaw.
Laguna 14/12 Bandsaw Mobility Wheel Kit
Laguna Bandsaw Mobility Wheel Kit
Laguna 18BX Wheelkit
Laguna 18BX Wheelkit
Laguna Aluminium Table Insert For 14/12, 14/BX & 18/BX Bandsaw
Anodised aluminium throat plate with 4 corner adjusting screws to ensure a flush fit to the table.Approximate Size 74mm x 134mmCompatible With:
14/12
14/BX
18/BX
Laguna Rear Ceramic Blade Guide For Bandsaws: 14/12 14/BX 18/BX PN PBAND1412-175-4-30
Rear ceramic blade guide for Laguna bandsaws.Approximate size 16mm diameter x 6mm deepSold Individually, there are 2 on each machine.Part Number in owners manual: PBAND1412-175-4-30 Compatible With:
14/12
14/BX
18/BX
Laguna Side Ceramic Blade Guide For Bandsaws: 14/12 14/BX 18/BX PN PBAND1412-175-4-26
Side ceramic blade guide for Laguna bandsaws.
Approximate size 22mm length x 5mm x 5mm
Sold Individually, there are 8 on each machine.
Part Number in owners manual: PBAND1412-175-4-26
Compatible With:
14/12
14/BX
18/BX
NVR Safety Switch 240v - For Use with Any Router Table W026
No Volt Release (NVR) Switch for Routers.
For Any Power tools Up To 2200 watts
Integral 3 Pin Socket
Separate Start and Stop Buttons
Cover Acts As Emergency Stop
Supplied With 2m Cable and Plug
For use with 220v-240v power tools only
The switch can be mounted to the steel frame of any router table or mounted in any convenient location avoiding the user having to reach under the table to...
Olson Bandsaw / Scroll Saw Premium Blade Lubricating Wax Stick - Extend Sawblade Life!
Prolongs saw blade life and produces smoother and quicker cuts!
Record Power Bandsaw Fence Upgrade Kit - Complete Sabre350 Rip Fence (Fits BS300E,BS350S + BS400)
Record Power Bandsaw Fence Upgrade Kit - Complete Sabre350 Rip Fence (Fits BS300E,BS350S + BS400)
88888 Sabre Bandsaw Fence Upgrade Kit
This kit upgrades the bandsaw rip fence to the same specifications as the SABRE series bandsaws, giving cam-action fence adjustment and a double-sided fence mount, meaning the fence can be supported on either side of the blade.
Compatible with the Record Power BS300E,...
Record Power BS350SW Pedal Wheelkit for BS350S
This wheelkit provides great flexibility for those with a small workshop or for people who may need to move the machine on a regular basis.
Record Power Heavy Duty Cast Iron Mitre Fence for Sabre Series Bandsaws fits Sabre 350 / 450
Record Power Mitre fence
Record Power Open Stand & Wheelkit for BS250 Bandsaw
This stand and wheel kit provides great flexibility for those with a small workshop or for people who may need to move the machine on a regular basis.
Record Power Pedal Wheel Kit for BS300E Bandsaw
This wheelkit provides great flexibility for those with a small workshop or for people who may need to move the machine on a regular basis.
Record Power Table Extension for Sabre350 / Sabre450 Bandsaw - BRITISH MADE!
Record Power Table Extension for Sabre350 / Sabre450 Bandsaw
This UK-made high-quality steel table extension fits the SABRE-350 and SABRE-450 bandsaws, giving an extra 545 x 300 mm working area to increase the support the machine gives to larger timbers. It can be fitted either to the rear or the right-hand side of the main table, to give support where it is needed most.
To ensure accurate fitment...
Record Power Table Insert for Bandsaws BS300, BS350, BS400, Sabre 350, Sabre 250
Record Power Table Insert for BANDSAWS
Record Power Wheel Kit for BS400 Bandsaw
This simple but effective wheelkit is essential if you will need to reposition the BS400 in your workshop. Wheels are added to one end of the baseplate and a bracket is added to the other keeping the machine level and stable. This can then be levered onto a wheeled jockey bar to tilt the machine a few degrees and enable it to be moved on the wheels.
Record Power Wheel Kit for Sabre 350 Bandsaw 67050
Record Power Wheel Kit For Sabre350 Bandsaw 67050
Record Power Wheel Kit for Sabre 450 Bandsaw
Record Power Wheel Kit For Sabre450 Bandsaw
Small Rip Fence Extrusion for Record Power Bandsaws
Compatible with the Record Power BS300E, BS350S and BS400 bandsaws.
Charnwood 2MTS Taper Sleeve 2MT-1MT
Taper Adaptor.
Charnwood Universal Lathe Floorstand
A heavy duty floor stand designed for Mini and Midi bench lathes.
The width of the stand is fully adjustable allowing it to be compatible with many different makes and models of lathe. The two mounting platforms have a series of slotted holes for securely bolting the lathe to the stand.
The height of the stand is also adjustable so a comfortable working height can be set.
Supplied with 4 adjustable...
Laguna 18|36EB 20" Steel Extension
The 20″ Extension includes a solid cast iron tailstock support block for outboard turning. The support block raises the tailstock back to centerline for stability & additional material support when outboard turning. It is supplied with a Tool-Rest Extender. The 20″ Extension can be mounted in 4 different positions including headstock or tailstock end of the bed as a bed extension,...
Laguna 18|36SE 12" Swing Away Extension
The 12″ Swing-Away Extension allows you to “Park” the tail-stock onto the Extension & then swivel it out of the way when not in use. It also works as a 12″ bed extension.
Laguna 18|36WK Deluxe Wheel System
The Wheel System is designed for both the REVO 12|16 (not currently available in the UK) and 18|36, allowing maximum stability by letting the REVO 12|16 or 18|36 to only sit on the four pads when in use. When moving the Revo 18|36, all four swiveling casters are engaged. Dual Gas Struts make raising & lowering ultra smooth.
NOVA Comet II Woodturning Lathe Bed Extension
Adds 24.6″ length to your NOVA Comet II Lathe
Solid Cast Iron for vibration dampening
Easy to add and remove
Perfect accessory for longer spindle projects
Exclusive to the NOVA Comet II Midi Lathe
Warranty: 2 Year Full Replacement
NOVA Comet Series Woodturning Lathe Stand
The NOVA Comet Series Stand Accessory provides a free standing platform for your NOVA Comet Midi Lathe. It gives you a mobile and stable work support. Its rugged tubular steel design provides strength without adding a lot of unnecessary weight. The powder coated finish provides durability in all conditions. The specially designed V-legs allows more room under the lathe for maneuvering. The stand adjusts...
Planet Thread Adaptor - M33 x 3.5mm Female to 1'x8tpi Male
Planet Thread Adaptor - M33 x 3.5mm Female to 1"x8 tpi Male
Planet Thread Adaptor - M33 x 3.5mm Female to 3/4' x 16tpi Male
Planet Thread Adaptor - M33 x 3.5mm Female to 3/4" x 16tpi Male
Planet Morse Taper Adaptor Sleeve MT2-MT1
Converts morse taper 2 spindles to Morse Taper 1
Planet PM3S Pen Mandrel Spares - Spacers 3pc, Brass Nut 1pc
3 x Spacers
1 x Brass Nut
Planet Tailstock Knockout Bar 265mm
Tailstock Knock Out Bar
Record Power 12' Toolrest (1' Stem) for DML320, New CL3-CL4 and MAXI-1
Record Power 12" Toolrest (1" Stem) for DML320, New CL3-CL4 and MAXI-1
Record Power 4' Toolrest (1' Stem) for DML320, New CL3-CL4 and MAXI-1
Record Power 4" Toolrest (1" Stem) for DML320, New CL3-CL4 and MAXI-1
Record Power 6' Toolrest (1' Stem) for DML320, New CL3-CL4 and MAXI-1
Record Power 6" Toolrest (1" Stem) for DML320, New CL3-CL4 and MAXI-1
Record Power 6' Toolrest for DML305 / CL2 3/4' Shaft
62 tool rest for the Record Power CL2 with 3/4" spindle