Record Power SC4 Professional Chuck Package Insert Version with Standard Jaw, Woodscrew + Face Plate

"Seamless ordering process, and helpful staff who were able to confirm I'd put the correct insert with the order :-)"

"Very good chuck, does what it says"

"SC4 chuck, great piece of kit,I have one already so this was just an addition to my wee work shop. Highly recommend this chuck and great buy "

"Fit for purpose - It's my second"

"Brilliant chuck .Top quality well engineered.Arrived very promptly . Can’t fault Yandles always good price and fantastic customer service."

"excellent service as usual thank you"

"awesome bit of kit really well built easy to use "

"Great price ,great service. Will use again "

"Great chuck arrived on time "

"Looks and feels very well engineered. I'm a very new turner but very easy to use."

"My first chuck and what a lovely piece of kit! Solidly built, easy to use and after playing with it yesterday very pleased!"

"the chuck appears to be be very good value for money"

"Really pleased that I went for the SC4. Outstanding chuck. First class service from Yandles."

"I bought this from Yandles & son as I have other record products and they were the best price wise."

"Great piece of kit, solidly built, and offers me more mounting options than the basic lathe package I have( beginner/novice). Competitively priced and great service from Yandles. "

"Great piece of kit. Really solid, beautifully engineered and a pleasure to use."

"Yandle’s really went above and beyond, I ordered the SC4 but measured the thread size wrong, I contacted sales and they organised for me to return the adapter and sent out the correct size. Both delivery of the chuck and the new adapter was very quick (couple of days)"

"Great chuck "

"I could not fault the service that have received from Yandles 'SUPERB' is the only word! The Chuck has yet to prove it's worth but having used Record Products in past that should not be a problem."

"Record Power SC4"

"Brilliant jaws, very high quality would recommend to any one needing jaws of this size."

"Great bit of kit. "

"Nice chuck...good price and with all the features that I was after. Hope it stays bright, similar construction and steel to a shaft coupling I bought for my boat recently! Used it a couple of times, only time will tell."

"Apart from the plastic box being broken, I am unable to comment on the Scroll Chuck itself as I am stll awaiting the Record Coronet Herald.Although I was later advised that the feet for the lathe would not be available until the end of January, I was not advised at the time of placing the order, even though the payment went out of my bank account via PayPal"

"Excellent service great chuck. "

"Bought the sc4 for larger pieces..I have a sc3 and had a sc3 which were both exellent...the sc4 is even better ...well engineered ...fits tight up to headstock..the price is much better than axminster or Robert Sorby equivalent...great service from Yandles "

"Excellent piece of equipment, delighted with it, so useful as well."

"This is a great 'standard' pattern chuck that seems to be compatible with the Bob Sorby Patriot Chuck, Technotools' Nova chucks and several other chucks which I forget the name of right now (NOT Axminster though). This cross compatibility means that you can use other manufacturer's jaws, so if you need a set of jaws which Record don't make, don't worry... just look further afield. This is the main reason why I settled on this style of chuck. Another reason was that my Tyme Cub lathe's headstock screw size isn't one of the mainstream sizes (such as M33x3.5) - instead it's ¾" x 16tpi. The SC4 was one of the few chucks for which I could buy an insert in the size that I needed. A nice touch was that the insert came included in the price as well. Gripes? Only minor stuff. The chuck has very sharp edges on the jaw slide ways and more noticably on the jaws themselves (when extended out past the side of the chuck. I have been tempted to file these down, but the chuck is still quite new and shiny and not a workhorse of the shop (yet!). I'll probably wait until I mash up the chuck a bit more before breaking out the files and sandpaper. Another gripe is that the chuck doesn't have the same jaw change mechanism of the Easy Chuck ;) All in all a great chuck, well built and it's one of the cheapest of these 'clone' chucks from a Western supplier. I may check out the Chinese copy of these chucks at some point in the future - if they are half decent, I could have one chuck per set of jaws... no more changing jaws :)"

"Great value and rapid delivery, cannot recommend too highly "

"Fantastic chuck for a reasonable price. It is great that this comes with whatever insert is needed for your lathe so that if you change lathe to a different size thread then it will just cost you the £15-£18 for a different insert, also handy if you have a couple of lathes and want to swap the chuck from one to the other. Super well balanced and seriously well built. It grips extremely well and there are a huge amount of different jaw sets you can buy if you want and they are also very good value. It comes packaged with a great faceplate, worm screw and standard jaws and if you also buy yourself a square end drive centre (£15) then you can put the chuck on and not have to remove it as it will have you covered for all jobs. I can't recommend this chuck highly enough. It is brilliant and worth the money all day long."

"Very nice chuck, in all honesty apart from the plastic material indexing backplate, which I will unlikely use, I can't tell the difference between the Record & the Sorby other than price. I already ordered one of these for our local Mens Shed, this one goes on my beautiful new Herald lathe. Recommend both the chuck & the lathe. "

"Got this Record SC4 chuck package and the 62323 long nosed jaws at the same time. very pleased with both and good price and delivery from Yandles as always."

"Brilliant chuck so easy to use makes life much better"

"I am using this with Record DML320 midi woodworking lathe. Mechanically very sturdy and seems to be also very precise. Assembly instruction were clear and one should read them before starting. There is small leather "chip" that should be placed inside chuck to prevent locking screw from damaging lathe M33 thread! So far nothing to complain."

"I have upgrade to the Record CL4, and wanted a chuck which would go well with my new lathe. The SC4 is a very strong chuck, which you only need one hand for,excellent bit of kit."

"Excellent product and first class service."

"Great chuck, grips well even on very green wood and a heavy cut. This Record package includes more than any of the rival offerings and at a far better price. I've been turning for many years and never bought a chuck because you can do it all without one but seeing this price I finally caved in and am glad that I did. Best price was with Yandles and am pleased to say that delivery was prompt."

"Excellent price and very efficient service in all respects."

"in my opinion this is the best chuck out there."