Chestnut Ebonising Lacquer 400ml Aerosol
Available for home deliveryProduct Description
Ebonising Lacquer is a tough, hard-wearing water-based lacquer. It is heavily pigmented so that when it is dry it emulates the classic satin look of ebony.
Usually applied over a sanding sealer (either Cellulose Sanding Sealer or Acrylic Sanding Sealer aerosol) it is touch dry in about five minutes and hard dry after twenty minutes.
Although heavily pigmented it is not paint and will still allow the grain of the timber to show through, rather than obliterating it completely.
Liming Wax and Gilt Cream can be applied over Ebonising Lacquer to give a pleasing, eye-catching yet very simple artistic effect.
If a bright gloss finish is required from Ebonising Lacquer this is best achieved by using Burnishing Cream on the lacquer with will polish it up to a high gloss. Acrylic Gloss Lacquer can also be applied on top of Ebonising Lacuer, as can WoodWax 22 and Microcrystalline Wax
Customer Reviews
Specification
Typical uses
A satin, water-based lacquer which gives a very hard-wearing black finish to emulate the look of ebony.
Method of application
Aerosol
Drying time
Within twenty minutes under normal conditions.
Coverage
approx. 2-4 sq. metres per can
Compatibility
Can be used over Acrylic Sanding Sealer and Cellulose Sanding Sealer.
Tips
Be sure to avoid spraying over other items you do not want contaminated with black lacquer! On large areas apply in thin coats. This product can be used for exterior applications.
Thinners
Not applicable
Safety Considerations
Avoid inhalation of spray (see Safety Data Sheet or warnings on can for full details).
Collect in Store
This item is available for collection.
Home Delivery
GB delivery (excluding NI, Highlands and Islands) from FREE
You Can Also...
Get help, write a review or share this product...
ask a questionwrite a reviewprint this pagePeople who bought this also bought...
