Grid
List
Assorted Drill Bit Set 126pce 126pce
Assorted Drill Bit Set 126pce
Assorted Drill Bit Set 204pce 204pce
Assorted Drill Bit Set 204pce
CMT Forstner Bit Drill Bit Metric Sizes 10mm - 50mm
Made of super strength alloyed steel (SP).
Ideal for drill presses, electric and cordless drills.
For clean sharp holes with straight sides and flat bottoms in all types of soft wood.
Bits feature right-hand rotation.
Choose your size above
Cone Cutter - M2 HSS
Cone Cutter - M2 HSS
3-14mm Diameter
Addax Cone Cutter
1 per pack
For drilling, enlarging and de-burring holes in thin sheet metal up to a thickness of 2mm.
High quality M2 Grade HSS steel.
Cone Cutter - M2 HSS
Cone Cutter - M2 HSS
5-20mm
Addax Cone Cutter
For drilling, enlarging and de-burring holes in thin sheet metal up to a thickness of 2mm.
High quality M2 Grade HSS steel.
1 Per Pack
DIY 95W Drill Bit Sharpener 95W
DIY 95W Drill Bit Sharpener
DRAPER 16mm Countersink Bit
16mm Countersink Bit
DRAPER 19 piece Cobalt Coated Metric HSS Drill Bit Set
19 piece Cobalt Coated Metric HSS Drill Bit Set
DRAPER 4 Piece Plug Cutting Set
4 Piece Plug Cutting Set
DRAPER 6mm Countersink Bit
6mm Countersink Bit
DRAPER Drill and Accessory Kit (122 Piece)
Drill and Accessory Kit (122 Piece)
DRAPER Expert 11.0mm HSS Drill
Expert 11.0mm HSS Drill
DRAPER Flat Wood Bit Set (13 Piece)
Flat Wood Bit Set (13 Piece)
DRAPER Titanium Nitride Coated Flat Wood Bit Set (7 Piece)
Titanium Nitride Coated Flat Wood Bit Set (7 Piece)
Faithfull 5 Piece Lip & Spur Wood Drillbit Set
The Faithfull set of 5 lip and spur wood bits.
The preferred cutting tip design for drilling wood, these alloy steel drills have a steeper twist and a deeper flute than HSS bits, for rapid clearance of waste. They are ideal for use in dowelling jigs.
Sizes: 4, 5, 6, 8 and 10mm.
Diameter: 4mm. Working Length: 43mm. Overall Length: 75mm.Diameter: 5mm. Working Length: 50mm. Overall Length: 85mm.Diameter:...
Faithfull Centre Points 2 x 6mm
These Faithfull Centre Points are used for accurate alignment of dowel holes.
To use: Place the blunt end in a hole already made for dowel in one piece of wood, place the second piece of wood in required position and press down to leave centre of second hole accurately marked.
Faithfull Combination Auger Bit 10mm x 200mm Overall Length
Faithfull Combination Augers can be used in either a hand or power drill at low speeds. Machined from high quality carbon steel, they feature a pitched screw point for accurate starting with a wide flat spiral for improved stability straight tracking and fast waste removal. Augers may be used in timber, plywood, MDF and blockwood and can be resharpened using a hand file.
Standard series combination...
Faithfull Combination Auger Bit 13 mm x 230 mm SDS Plus Shank
These Faithfull SDS combination auger bits are manufactured from one piece of high quality steel and have wide flat helical flutes for improved stability and straight tracking.
They have a machine point together with resharpenable honed and ground spur and cutting edge and are Titanium coated for added durability.
Whilst these have SDS fittings please note that they MUST not be used on Impact Action.
Titanium...
Faithfull Diamond Drillbit Double Ended 8mm
The diamond drill bits cut clean holes in the hardest materials including granite, glass, marble, porcelain (grade 5) and slate.
The Faithfull drill bit comes complete with a suction attached water reservoir to cool and lubricate the bit while drilling. They have a double-ended design and should be used at speeds between 500-700 rpm with light pressure.Ideal for bathroom, kitchen and tiling industries.
Faithfull Dowel Drill Stops 1 x 6, 8 & 10mm
The Faithfull Dowel Drill stops clamp on to drill bits enabling a hole of the correct depth to be made.
Pack of 3 sizes of drill stops - 6, 8, and 10 mm.
2.5mm hex key is required to fit the drill stops (not included).
Faithfull Flatbit 19mm Overall Length 155mm
Flat bits are designed to perform fast, clean cuts and will bore all types of timber and are equally efficient when drilling with or against the grain. All bits have a precision ground point and cutting surfaces with extended spurs for faster cutting with a bright finish for rust protection. All sizes except the 6mm have a non-slip hexagonal shank with a locking mechanism compatible with adapters or...
Faithfull Flatbit 30mm Overall Length 155mm
Flat bits are designed to perform fast, clean cuts and will bore all types of timber and are equally efficient when drilling with or against the grain. All bits have a precision ground point and cutting surfaces with extended spurs for faster cutting with a bright finish for rust protection. All sizes except the 6mm have a non-slip hexagonal shank with a locking mechanism compatible with adapters or...
Faithfull HCS Hinge Bore Bit 35mm x 60mm 8mm Shank
The HCS hinge bores are specially designed for drilling blind holes when fitting concealed (blum) hinges in kitchen, bedroom and bathroom cabinet doors. They are suitable for use on all natural woods and man-made materials such as blockboard, melamine faced boards, chipboard and MDF. High carbon steel (HCS) hinge bits are not recommended for repetitive work in man-made boards. These bits should always...
Faithfull High Speed Steel Countersink 13mm (1/2in)
High speed steel rosehead 90° included angle countersink. For countersinking screw holes for flush fitting of screw heads in mild steel, plastics and non-ferrous metals. Also suitable for working in wood, plywood, MDF and other man made boards.
Can be used in both hand tools and power drills.
Faithfull High Speed Steel Countersink 13mm (1/2in) - Chubby
High Speed Steel Rosehead Chubby 90° included angle Countersink. For countersinking screw holes for flush fitting of screw heads in mild steel, plastics and non-ferrous metals. Also suitable for working in wood, plywood, MDF and other man made boards. Can be used in both hand tools and power drills.
Type: Rosehead - Chubby.Size: 13mm (1/2in).Shank Diameter: 6mm (1/4in).
Faithfull Jobber Drill High Speed Steel Pre Pack 1.50mm
Faithfull Metric jobber drills that are ideal for DIY and professional use in hand and power drills. Robust design gives less breakage, easier hole start and improved penetration.Packed in convenient re-usable plastic pouches.
For drilling steel, Iron and most metals.
Faithfull Lip & Spur Wood Drillbit 3.0mm
The preferred cutting tip design for drilling wood, chipboard and MDF. This alloy steel drill has a steeper twist and a deeper flute than HSS bits for rapid clearance of waste. Ideal for use in dowelling jigs.
Faithfull Lip & Spur Wood Drillbit 4.0mm
The preferred cutting tip design for drilling wood, chipboard and MDF. This alloy steel drill has a steeper twist and a deeper flute than HSS bits for rapid clearance of waste. Ideal for use in dowelling jigs.
Faithfull Lip & Spur Wood Drillbit 8.0mm
The preferred cutting tip design for drilling wood, chipboard and MDF. This alloy steel drill has a steeper twist and a deeper flute than HSS bits for rapid clearance of waste. Ideal for use in dowelling jigs.
Size: 8mm
Working Length: 75mm
Overall Length: 120mm
Faithfull Pilot Drill Set (4) For Screwsinks
These Faithfull Screwsinks can be used for drilling, countersinking and counter-boring in one operation. The countersinking part can be slid up and down the drill part of the tool by means of a hexagon key to suit the depth of hole being drilled.
To ensure an accurate fit, it is suggested that the corresponding plug cutter is used from the Faithfull range.
Each screwsink is supplied with a hexagon...
Faithfull Plug Cutter No. 6
Used in combination with screwsinks to prepare perfectly sized plugs to fill counterbored holes.
For best performance power drill should be held in a stand.
For a perfect grain match use an offcut from the timber being plugged.
To ensure an acurate fit we suggest you use the same screwsink from the Faithfull brand.
Faithfull Plug Cutter No. 8
Used in combination with screwsinks to prepare perfectly sized plugs to fill counterbored holes.
For best performance power drill should be held in a stand.
For a perfect grain match use an offcut from the timber being plugged.
To ensure an acurate fit we suggest you use the same screwsink from the Faithfull brand.
Faithfull Plug Cutter No.10
Used in combination with screwsinks to prepare perfectly sized plugs to fill counterbored holes.
For best performance power drill should be held in a stand.
For a perfect grain match use an offcut from the timber being plugged.
To ensure an acurate fit we suggest you use the same screwsink from the Faithfull brand.
The set of 4 contains sizes No 6, 8, 10 and 12
Faithfull Plug Cutter No.12
Used in combination with screwsinks to prepare perfectly sized plugs to fill counterbored holes.
For best performance power drill should be held in a stand.
For a perfect grain match use an offcut from the timber being plugged.
To ensure an acurate fit we suggest you use the same screwsink from the Faithfull brand.
The set of 4 contains sizes No 6, 8, 10 and 12.
Cuts Size 12 Plugs (11.5mm)
Faithfull Screwsink No.10
These Faithfull Screwsinks can be used for drilling, countersinking and counter-boring in one operation. The countersinking part can be slid up and down the drill part of the tool by means of a hexagon key to suit the depth of hole being drilled.
To ensure an accurate fit, it is suggested that the corresponding plug cutter is used from the Faithfull range.
Each screwsink is supplied with a hexagon...
Faithfull TC Hinge Boring Bit 35mm X 60mm
A quality hinge boring bit with a Tungsten Carbide cutter designed for repetitive drilling of blind holes when fitting concealed (blum) hinges in kitchen, bedroom and bathroom cabinet doors. They are suitable for use on all natural woods and man-made materials such as blockboard, melamine faced boards, chipboard and MDF and provide a long working life.
These bits should always be used with a stand-mounted...
Famag Adjustable centre bit size 2, 22-76 mm
Adjustable centre bit size 2, 22-76 mm
Famag Adjustable Countersink, Carbide tipped
Professional carbide tipped adjustable countersink, countersinking angle 90° or 180°, two-part version. Can be clipped universally on all drill bits Ø 3-8 mm, incl. allen key. Ø 8 mm must be pushed into the countersink from behind with the flute in front
Drilling and countersinking in one single operation by direct clipping on drill bits (also intermediate sizes e.g. 5.5 mm)....
Famag Auger bit for hard wood, with bottom blade, OAL460mm,?10mm,spiralL380mm
Auger bit for hard wood, with bottom blade, OAL460mm,?10mm,spiralL380mm
Famag Auger bit for hard wood, with bottom blade, OAL460mm,?12mm,spiralL380mm
Auger bit for hard wood, with bottom blade, OAL460mm,?12mm,spiralL380mm
Famag Auger bit for hard wood, with bottom blade, OAL460mm,?14mm,spiralL380mm
Auger bit for hard wood, with bottom blade, OAL460mm,?14mm,spiralL380mm
Famag Auger bit for hard wood, with bottom blade, OAL460mm,?16mm,spiralL380mm
Auger bit for hard wood, with bottom blade, OAL460mm,?16mm,spiralL380mm
Famag Auger bit for hard wood, with bottom blade, OAL460mm,?18mm,spiralL380mm
Auger bit for hard wood, with bottom blade, OAL460mm,?18mm,spiralL380mm
Famag Auger bit for hard wood, with bottom blade, OAL460mm,?20mm,spiralL380mm
Auger bit for hard wood, with bottom blade, OAL460mm,?20mm,spiralL380mm
Famag Auger bit, Lewis pattern OAL320,O?10mm,spiralL255mm
Auger bit, Lewis pattern OAL320,O?10mm,spiralL255mm
Famag Auger bit, Lewis pattern OAL320,O?12mm,spiralL255mm
Auger bit, Lewis pattern OAL320,O?12mm,spiralL255mm
Famag Auger bit, Lewis pattern OAL320,O?14mm,spiralL255mm
Auger bit, Lewis pattern OAL320,O?14mm,spiralL255mm
Famag Auger bit, Lewis pattern OAL320,O?16mm,spiralL255mm
Auger bit, Lewis pattern OAL320,O?16mm,spiralL255mm