Grid
List
Concealed Hinge Jig Bit 35mm KHI-BIT
Concealed Hinge Jig Bit 35mm
Deck Bit, Collar & Wrench Set
Stepped drill bit drills concealed holes with the Kreg Deck Jig™. Includes rugged depth collar, which is secured in place on the bit with the hex wrench, and is fully compatible with standard 6.3mm (1/4") quick-change chucks. 3pce set.
Deck Jig™ Driver Bit
High quality, durable steel with 6.3mm (1/4") hex shank. Overall length 152mm (6").
Hardware Containers 4pk KSS-L Large
Hardware Containers 4pk
Hardware Containers 4pk KSS-S Small
Hardware Containers 4pk
HD Replacement Bit FOR KREG FOREMAN DB210-HDB
HD Replacement Bit
Kreg #3 Square Driver
Kreg #3 Square Driver
Kreg 2 x 152mm / 6" #2 Square Driver Combo
2 x 152mm (6") drivers for use with #2 square drive screws.
Kreg 76mm/3” & 152mm/6” #2 Square Driver Combo
Solid, one-piece construction, magnetic tip and quick-change compatibility for fast, easy bit changes. Includes 76 and 152mm (3" and 6") sizes.
Kreg Depth Collar & Hex Wrench for Step Drill Bit
Rugged depth collar and hex wrench, for use with any 9.5mm (3/8") Kreg® drill bit. Controls the depth of the drill bit when drilling standard pocket-holes.
Kreg Drill Guide Spacer Blocks For Kreg K4
Three handy spacers compensate for additional 6.3mm (1/4") in material thickness each, during repair applications. Designed for use with the Kreg Jig® and Kreg Jig® Master System.
Great for various repair applications
Compensate for additional 1/4" in material thickness
For use with the Kreg Jig® K4, K4MS, and K5
Need to compensate for additional material thickness during various...
Kreg Micro Depth Collar & Allen Wrench for Micro Bit
Rugged depth collar and hex wrench for micro drill bit. Controls depth of drill bit when drilling standard pocket-holes. For use with Kreg® Micro Drill Bit.
Kreg Micro Drill Bit
Creates a 25% smaller pocket-hole. 33.3mm (1-5/16") long. Overall length 152mm (6").
Kreg Shelf Pin Jig Drill Bit KMA3215-EUR
Kreg Shelf Pin Jig Drill Bit
Kreg Step Drill Bit
High speed steel drill bit for use with Pocket-Hole machines. Single-piece design eliminates clogging and provides a smoother, faster drilling stroke than drill bits with replaceable centre drills. Dia 9.5mm (3/8"). Overall length 152mm (6").
Kreg Support Stop
Position any distance from the Kreg Jig® to repeat the same pocket-hole over and over again. The stop swings out of the way to serve as a support for large panels. Dimensions 127 x 51 x 76mm (5" x 2" x 3").
Micro Drill Bit with Guide DB210-MBB
Micro Drill Bit with Guide
Micro Pocket™ Plugs Paint Grade
Micro Pocket™ Plugs
Quick-Change Hex Shank Drill Bit
For use with Kreg® Quick Change Chuck. Also works with standard chucks of 9.5mm (3/8") dia. Features 6.3mm (1/4") hex shank and drills a standard 9.5mm (3/8") pocket-hole.