Grid
List
Beber Sloyd Pattern Blade Whittling Knife
This quality Scandinavian pattern Sloyd whittling knife features a 2.1/4 inch finely ground and polished blade made from 1095 high carbon tool steel which is hardened to 58-62 Hrc and a handle from selected beech with a steel ferrule. Overall length is approximately 6.1/2 inches. PLEASE NOTE THAT THIS TOOL IS SUPPLIED WITH A FACTORY SHARP EDGE BUT WE HIGHLY RECOMMEND THAT YOU HONE IT ON A LEATHER...
Chip Carving Knife
Chip Carving Knife
Detail Knife
Our Beber carving knives are of a traditional pattern featuring a high quality Sheffield steel blade that has been finely ground and polished to a keen edge. The handles are from top quality Rosewood that is nicely finished and waxed. Made in Sheffield England by a leading manufacturer. The Beber detail knife has a fine but sturdy 36mm honed and polished blade for intricate work and features a double...
Flexcut KN34 Skewed Detail Knife
These knives are made with the same edge-holding steel as the Flexcut gouges and chisels. The Skewed Detail Knife gives the user a different approach to a detail or paring cut. Instead of a perpendicular bevel as found in many detail knives, this bevel is slightly skewed. The handle shape allows holding like a pencil or a conventional knife.
Mora Carving Knife 59mm
Thin Tapered blade made from laminate steel Oiled Birchwood handle Blade Length – 59mm
Mora Carving knife 82mm
Thin tapered blade made from laminate steel Oiled Birchwood handle Blade length – 82mm
Mora Craftline Chisel Knife
The Single ground blade made of carbon steel is an impressive 3.5mm thick, making this one of our most powerful and robust knives. Together with the solid and shock resistant handle, this chiseling knife is the obvious choice for all manner of woodwork. the ergonomic handle made of TPE rubber gives optimal friction, while the barrel shape means the knife always sits comfortably in your hand.
Mora Craftline Punch Knife
Morakniv Precision is a knife with a short, pointed blade, making it perfect for all types of precision work. For detailed carpentry, to round off frames, for pulling cables through plaster walls – the possibilities are many.
Since the blade has the same shape as a woodcarving knife it’s easy to get close up to your work, for those detailed tasks. The blade is made of carefully selected...
Mora Double Edge Hook Knife 15mm
This knife has a double-edged stainless steel blade so that you can use it for both pull and push carving. The blade has the smaller curve of our hook knives. We have optimised the blade to make it run smooth over the inside of the spoon or bowl. Improved edge bevels complete the blade and give it the optimum carving experience. To protect both you and the knife it comes with a simple but ingeniously...
Mora Double Edge Hook Knife 25mm
A knife with a double-edged stainless steel blade, for both pull and push carving. This blade has a more open curve. Perfect for making a clean cut surface or bowls with large radius. We have optimised the blade to make it run smooth over the inside of the spoon or bowl. Improved edge bevels complete the blade and give it the optimum carving experience. To protect both you and the knife it comes with...
Mora Pro C
Pro C has an optimized handle made of TPE rubber. This gives it an ergonomic and more comfortable grip and the rubber means the handle doesn’t conduct the cold. The carbon steel also makes the knife simple to re-sharpen, so you can use it time and time again. Just remember that carbon steel can be affected by moisture and corrosive environments. So make it a habit to wipe the knife and oil the...
Mora Pro S
The stainless steel is also ideal for outdoor work, as it isn’t affected by the elements to the same extent as carbon steel. It also keeps the knife sharper for longer and doesn’t require as much maintenance. The ergonomic handle made of TPE rubber gives optimal friction, while its spindle shape means the knife always sits comfortably in your hand.
Mora Single Edge Hook Knife
Single edged, stainless steel blade Oiled birchwood handle Blade length – 52mm, Radius – 12mm
Great for spoon Carving
Mora Utility Knife 511
The solid finger guard optimises safety and the new, larger-shaped handle makes the knife sit even better in your hand. the blade is made of high quality carbon steel, manufactured in Mora according to their secret recipie. this makes it easier to resharpen. however, keep in mind that carbon steel can be affected by moisture and corrosive environments so make it a habit to wipe your knife and oil...
Narex Brass carving mallet 40 x 52 mm
Brass carving mallet increases efficiency of the stroke on the chisels while saving energy. The heavy brass head does not bounce back, so the full energy put into the blow is used. Compared to bigger mallets there is no need of a swing of an arm, only a slight pivot strike of the wrist.
Working part diameter: 40 mm
Handle size: 36 mm x 118 mm
Total length of the mallet: 170 mm
Handle: stained...
Narex Carving knife bent, PROFI 40 x 12 mm
Carving knifes PROFI are handmade tools of the highest quality, designed especially for professional carvers. Blades are made of Manganese-Vanadium tool steel and heat treated to the hardness of 60-62 HRc. Knife handles are made of beach wood. The surface is stained and waxed.
Blade size: 45 mm x 12 mm
Knife length: 180 mm
Narex Carving knife for spoon making, double-edge
A great addition to the Profi range, are the spoon carving individual knives, including this Double Edge version. These are also available in kits too.
Detailed Description Blade: Mn steel, hardness 61HRc Knife: stained beech wood, varnished
Narex Carving knife for spoon making, left handed
A great addition to the Profi range, are the spoon carving individual knives, including this Left handed version. These are also available in kits too.
Detailed Description Blade: Mn steel, hardness 61HRc Knife: stained beech wood, varnished
Narex Carving knife for spoon making, right
A great addition to the Profi range, are the spoon carving individual knives, including this Right handed version. These are also available in kits too.
Detailed Description Blade: Mn steel, hardness 61HRc Knife: stained beech wood, varnished
Narex Carving knife for spoon making, small right
A great addition to the Profi range, are the spoon carving individual knives, including this Small Right handed version. These are also available in kits too.
Detailed Description Blade: Mn steel, hardness 61HRc Knife: stained beech wood, varnished
Narex Carving knife necking, PROFI 40 x 12 mm
Carving knifes PROFI are handmade tools of the highest quality, designed especially for professional carvers. Blades are made of Manganese-Vanadium tool steel and heat treated to the hardness of 60-62 HRc. Knife handles are made of beach wood. The surface is stained and waxed.
Blade size: 40 mm x 12 mm
Knife length: 175 mm
Narex Carving knife notchcutting, PROFI 40 x 12 mm
Carving knifes PROFI are handmade tools of the highest quality, designed especially for proffessional carvers. Blades are made of Manganese-Vanadium tool steel and heat treated to the hardness of 60-62 HRc. Knife handles are made of beach wood. The surface is stained and waxed.
Blade size: 40 mm x 12 mm
Knife length: 140 mm
Narex Carving knife, PROFI 40 x 12 mm
Carving knifes PROFI are handmade tools of the highest quality, designed especially for professional carvers. Blades are made of Manganese-Vanadium tool steel and heat treated to the hardness of 60-62 HRc. Knife handles are made of beach wood. The surface is stained and waxed.
Blade size: 40 mm x 12 mm
Knife length: 175 mm
Narex Set of carving chisels START in leather tool roll
suitable for beginners
blades from hardened carbon steel, sharpened edge
beech handles
chisels stored in a leather tool roll
Narex Set of carving knives, PROFI
Carving knifes PROFI are handmade tools of the highest quality, designed especially for professional carvers. Blades are made of Manganese-Vanadium tool steel and heat treated to the hardness of 60-62 HRc. Knife handles are made of beach wood, the surface is stained and waxed.
Knife sets are supplied in the wooden box.
Included items
NAR-822510
NAR822520
NAR822530
NAR822540
Skew Carving Knife
Skew Carving Knife
Skew Knife
Our Beber carving knives are of a traditional pattern featuring a high quality Sheffield steel blade that has been finely ground and polished to a keen edge. The handles are from top quality Rosewood that is nicely finished and waxed. Made in Sheffield England by a leading manufacturer. The Beber skew knife is designed to perform vertical cuts in areas difficult to access with a standard carving...