• display as grid Grid
  • display as list List

3-IN-1 BRASS MARKING GAUGE
3-IN-1 BRASS MARKING GAUGE
3-IN-1 BRASS MARKING GAUGE
£32.99 inc VAT
A2 TOOTHED BLADE FOR VERITAS SCRAPING PLANEA2 TOOTHED BLADE FOR VERITAS SCRAPING PLANE
A2 TOOTHED BLADE FOR VERITAS SCRAPING PLANE
A2 TOOTHED BLADE FOR VERITAS SCRAPING PLANE
£46.99 inc VAT

no image available
VERITAS BENCH BLADE
VERITAS BENCH BLADE Only 6mm tall for better access to your work Thumb-operated eccentric cam lever applies up to 130kg force Jaw face has a 5° inward cant to hold work securely Cam and jaw are cast steel, heat-treated for surface hardness Both fit in a 19mm (3/4") diameter through-hole Wedge-lock version is usable at any angle from horizontal to vertical
no image available
VERITAS BENCH BLADE WITH LOCKING POST
VERITAS BENCH BLADE WITH LOCKING POST

VERITAS BLADE FOR TAPERED TENON CUTTER - CURVED
VERITAS BLADE FOR TAPERED TENON CUTTER - CURVED
VERITAS BLADE FOR TAPERED TENON CUTTER - CURVED
£17.99 inc VAT
VERITAS BLADE FOR TAPERED TENON CUTTER - STRAIGHT
VERITAS BLADE FOR TAPERED TENON CUTTER - STRAIGHT
VERITAS BLADE FOR TAPERED TENON CUTTER - STRAIGHT
£17.99 inc VAT

VERITAS DOWELLING JIGVERITAS DOWELLING JIG
VERITAS DOWELLING JIG
VERITAS DOWELLING JIG   For centred dowelling or doweling boards to a reference face Micrometer clamp head can be set from 6 to 13mm from the centre line Setting is positive and accurate to a few thousands of an inch Movable clamp heads will grip work as small as 13mm x 35mm Chain drill dowel holes using the tapered pin to register off the last hole drilled Movable bushing carrier includes 3 hardened steel bushings: 1/4", 8mm (5/16"), and 3/8". All aluminium parts anodized black, except the red bushing carrier Register pins and clamping fittings are turned brass
£122.99 inc VAT
VERITAS JOINTER & EDGER  M0701VERITAS JOINTER & EDGER  M0701
VERITAS JOINTER & EDGER M0701
Dual purpose Topping off teeth prior to re-sharpening Provides an accurate guide for filing edges of cabinet scrapers 45° guide face for sharpening scraper and plane blades
£19.99 inc VAT

VERITAS MARKING GAUGE - MICRO-ADJUST METRIC
Sold Out
VERITAS MARKING GAUGE - MICRO-ADJUST METRIC
Hardened steel wheel cutter Cuts wood fibres, rather than tears Marks cleanly, even on cross grain The wheel retracts into the face of the gauge for storage and protection The gauges are very easy to set Use as a depth gauge to transfer measurements
£42.99 inc VAT
VERITAS MICRO-ADJUST WHEEL MARKING GAUGEVERITAS MICRO-ADJUST WHEEL MARKING GAUGE
VERITAS MICRO-ADJUST WHEEL MARKING GAUGE
Fine adjustment mechanism with a range of 6mm Large reference surface for square registration Aluminium body with brass face, stainless steel rod Hardened steel wheel cutter Cutter position allows use as a depth gauge Overall length 170mm
£49.99 inc VAT

VERITAS MINI TENON CUTTER - 1/2
VERITAS MINI TENON CUTTER - 1/2
Available in diameters from 5/16" to 9/16", latter used for chair rungs 1/2" are useful for trellis or lattice work All have a straight blade that cuts a 60° shoulder tenon (not a radiused shoulder tenon) 5/16" size cuts tenons up to 1" long 1/2" and 9/16" sizes cut tenons up to 1.3/8" long A plug gauge is included for easy blade setting, 3/8" round shank
£53.99 inc VAT
VERITAS MINI TENON CUTTER - 3/8
VERITAS MINI TENON CUTTER - 3/8
Available in diameters from 5/16" to 9/16", latter used for chair rungs 1/2" are useful for trellis or lattice work All have a straight blade that cuts a 60° shoulder tenon (not a radiused shoulder tenon) 5/16" size cuts tenons up to 1" long 1/2" and 9/16" sizes cut tenons up to 1.3/8" long A plug gauge is included for easy blade setting, 3/8" round shank
£49.99 inc VAT

VERITAS MINI TENON CUTTER - 5/16
VERITAS MINI TENON CUTTER - 5/16
VERITAS MINI TENON CUTTER - 5/16 Available in diameters from 5/16" to 9/16", latter used for chair rungs 1/2" are useful for trellis or lattice work All have a straight blade that cuts a 60° shoulder tenon (not a radiused shoulder tenon) 5/16" size cuts tenons up to 1" long 1/2" and 9/16" sizes cut tenons up to 1.3/8" long A plug gauge is included for easy blade setting, 3/8" round shank
£59.99 inc VAT
VERITAS MINI TENON CUTTER - 9/16
VERITAS MINI TENON CUTTER - 9/16
VERITAS MINI TENON CUTTER - 9/16 Available in diameters from 5/16" to 9/16", latter used for chair rungs 1/2" are useful for trellis or lattice work All have a straight blade that cuts a 60° shoulder tenon (not a radiused shoulder tenon) 5/16" size cuts tenons up to 1" long 1/2" and 9/16" sizes cut tenons up to 1.3/8" long A plug gauge is included for easy blade setting, 3/8" round shank
£53.99 inc VAT

VERITAS O1 BULLNOSE PLANE BLADE  05P4252
VERITAS O1 BULLNOSE PLANE BLADE 05P4252
VERITAS O1 BULLNOSE PLANE BLADE 05P4252 Lapped to a flatness tolerance of 0.005mm(0.0002") 25.4(1") wide, 3.2mm(1/8") thick
£39.99 inc VAT
VERITAS PLANING STOPVERITAS PLANING STOP
VERITAS PLANING STOP
VERITAS PLANING STOP A perfect holding solution when hand planing thin or wide stock Projects just 5.5mm, allows planing of boards as thin as 6mm Prevents the workpiece from skewing under your plane Two steel posts to fit either 19mm or 20mm dog holes Made in Canada
£24.99 inc VAT

VERITAS PM-V11 BENCH PLANE BLADE 2" 25 deg
VERITAS PM-V11 BENCH PLANE BLADE 2" 25 deg
Extremely durable PM-V11 steel alloy At least twice the edge life of A2 steel Highly wear-resistant, yet easy to sharpen Blades lapped to a flatness tolerance of +/-0.0127mm Made in Canada
£63.99 inc VAT
VERITAS PM-V11 BEVEL UP PLANE BLADE 1-3/4" 25 DEG
VERITAS PM-V11 BEVEL UP PLANE BLADE 1-3/4" 25 DEG
Extremely durable PM-V11 steel alloy At least twice the edge life of A2 steel Highly wear-resistant, yet easy to sharpen Blades lapped to a flatness tolerance of +/-0.0127mm Made in Canada
£52.99 inc VAT

VERITAS PM-V11 BLADE 2" FOR RECORD/STANLEY PLANES
VERITAS PM-V11 BLADE 2" FOR RECORD/STANLEY PLANES
PM-V11 Blades for Record & Stanley Planes Extremely durable PM-V11 steel alloy At least twice the edge life of A2 steel Highly wear-resistant, yet easy to sharpen Blades lapped to a flatness tolerance of +/-0.0127mm Made in Canada
£64.99 inc VAT
VERITAS PM-V11 BLOCK PLANE BLADE 1-5/8" 25 DEG
VERITAS PM-V11 BLOCK PLANE BLADE 1-5/8" 25 DEG
Extremely durable PM-V11 steel alloy At least twice the edge life of A2 steel Highly wear-resistant, yet easy to sharpen Blades lapped to a flatness tolerance of +/-0.0127mm Made in Canada
£44.99 inc VAT

VERITAS PM-V11 JACK PLANE BLADE 2-1/4" 25 DEG
VERITAS PM-V11 JACK PLANE BLADE 2-1/4" 25 DEG
Extremely durable PM-V11 steel alloy At least twice the edge life of A2 steel Highly wear-resistant, yet easy to sharpen Blades lapped to a flatness tolerance of +/-0.0127mm Made in Canada
£59.99 inc VAT
VERITAS PM-V11 JACK PLANE BLADE 2-1/4" 38 DEG
Sold Out
VERITAS PM-V11 JACK PLANE BLADE 2-1/4" 38 DEG
Extremely durable PM-V11 steel alloy At least twice the edge life of A2 steel Highly wear-resistant, yet easy to sharpen Blades lapped to a flatness tolerance of +/-0.0127mm Made in Canada
£59.99 inc VAT

VERITAS PM-V11 PLANE BLADE 2-3/8" 25 DEG
VERITAS PM-V11 PLANE BLADE 2-3/8" 25 DEG
Extremely durable PM-V11 steel alloy At least twice the edge life of A2 steel Highly wear-resistant, yet easy to sharpen Blades lapped to a flatness tolerance of +/-0.0127mm Made in Canada
£67.99 inc VAT
VERITAS PM-V11 SMOOTHING PLANE BLADE 2" 25 DEG
VERITAS PM-V11 SMOOTHING PLANE BLADE 2" 25 DEG
Extremely durable PM-V11 steel alloy At least twice the edge life of A2 steel Highly wear-resistant, yet easy to sharpen Blades lapped to a flatness tolerance of +/-0.0127mm Made in Canada
£52.99 inc VAT

VERITAS POWER TENON CUTTER - 1
VERITAS POWER TENON CUTTER - 1
Cut smooth, perfect tenons with radiused shoulders Cutters run vibration-free while being driven by an electric drill Yield the same accuracy when used with a hand brace Anodised aluminium body has been balanced to eliminate vibration integral level vial makes in-line cutting accurate The back end of the blade is safely contoured to avoid anything extending beyond the revolving body Body has a built-in honing guide for easy sharpening The blade is adjustable to cut the exact size in both dry & green wood. Eight sizes from 5/8" to 1" cut 2.3/4" long tenons Sizes 1.1/4" to 2" will cut 4.1/4" long tenons, for structural connections All have hex shanks; sizes 5/8" to 1" are for use in electric drill with a 3/8" chuck 1/4" to 2", need more torque to drive, use in larger electric drills with a 1/2" chuck
£111.99 inc VAT
VERITAS POWER TENON CUTTER - 1.1/2
VERITAS POWER TENON CUTTER - 1.1/2
Cut smooth, perfect tenons with radiused shoulders Cutters run vibration-free while being driven by an electric drill Yield the same accuracy when used with a hand brace Anodised aluminium body has been balanced to eliminate vibration integral level vial makes in-line cutting accurate The back end of the blade is safely contoured to avoid anything extending beyond the revolving body Body has a built-in honing guide for easy sharpening The blade is adjustable to cut the exact size in both dry & green wood. Eight sizes from 5/8" to 1" cut 2.3/4" long tenons Sizes 1.1/4" to 2" will cut 4.1/4" long tenons, for structural connections All have hex shanks; sizes 5/8" to 1" are for use in electric drill with a 3/8" chuck 1/4" to 2", need more torque to drive, use in larger electric drills with a 1/2" chuck
£119.99 inc VAT

VERITAS POWER TENON CUTTER - 1.1/4
VERITAS POWER TENON CUTTER - 1.1/4
Cut smooth, perfect tenons with radiused shoulders Cutters run vibration-free while being driven by an electric drill Yield the same accuracy when used with a hand brace Anodised aluminium body has been balanced to eliminate vibration integral level vial makes in-line cutting accurate The back end of the blade is safely contoured to avoid anything extending beyond the revolving body Body has a built-in honing guide for easy sharpening The blade is adjustable to cut the exact size in both dry & green wood. Eight sizes from 5/8" to 1" cut 2.3/4" long tenons Sizes 1.1/4" to 2" will cut 4.1/4" long tenons, for structural connections All have hex shanks; sizes 5/8" to 1" are for use in electric drill with a 3/8" chuck 1/4" to 2", need more torque to drive, use in larger electric drills with a 1/2" chuck
£115.99 inc VAT
VERITAS POWER TENON CUTTER - 1.3/4
VERITAS POWER TENON CUTTER - 1.3/4
Cut smooth, perfect tenons with radiused shoulders Cutters run vibration-free while being driven by an electric drill Yield the same accuracy when used with a hand brace Anodised aluminium body has been balanced to eliminate vibration integral level vial makes in-line cutting accurate The back end of the blade is safely contoured to avoid anything extending beyond the revolving body Body has a built-in honing guide for easy sharpening The blade is adjustable to cut the exact size in both dry & green wood. Eight sizes from 5/8" to 1" cut 2.3/4" long tenons Sizes 1.1/4" to 2" will cut 4.1/4" long tenons, for structural connections All have hex shanks; sizes 5/8" to 1" are for use in electric drill with a 3/8" chuck 1/4" to 2", need more torque to drive, use in larger electric drills with a 1/2" chuck
£114.99 inc VAT

VERITAS POWER TENON CUTTER - 2
VERITAS POWER TENON CUTTER - 2
Cut smooth, perfect tenons with radiused shoulders Cutters run vibration-free while being driven by an electric drill Yield the same accuracy when used with a hand brace Anodised aluminium body has been balanced to eliminate vibration integral level vial makes in-line cutting accurate The back end of the blade is safely contoured to avoid anything extending beyond the revolving body Body has a built-in honing guide for easy sharpening The blade is adjustable to cut the exact size in both dry & green wood. Eight sizes from 5/8" to 1" cut 2.3/4" long tenons Sizes 1.1/4" to 2" will cut 4.1/4" long tenons, for structural connections All have hex shanks; sizes 5/8" to 1" are for use in electric drill with a 3/8" chuck 1/4" to 2", need more torque to drive, use in larger electric drills with a 1/2" chuck
£129.99 inc VAT
VERITAS POWER TENON CUTTER - 3/4
VERITAS POWER TENON CUTTER - 3/4
Cut smooth, perfect tenons with radiused shoulders Cutters run vibration-free while being driven by an electric drill Yield the same accuracy when used with a hand brace Anodised aluminium body has been balanced to eliminate vibration integral level vial makes in-line cutting accurate The back end of the blade is safely contoured to avoid anything extending beyond the revolving body Body has a built-in honing guide for easy sharpening The blade is adjustable to cut the exact size in both dry & green wood. Eight sizes from 5/8" to 1" cut 2.3/4" long tenons Sizes 1.1/4" to 2" will cut 4.1/4" long tenons, for structural connections All have hex shanks; sizes 5/8" to 1" are for use in electric drill with a 3/8" chuck 1/4" to 2", need more torque to drive, use in larger electric drills with a 1/2" chuck
£104.99 inc VAT

VERITAS POWER TENON CUTTER - 5/8
VERITAS POWER TENON CUTTER - 5/8
Cut smooth, perfect tenons with radiused shoulders Cutters run vibration-free while being driven by an electric drill Yield the same accuracy when used with a hand brace Anodised aluminium body has been balanced to eliminate vibration integral level vial makes in-line cutting accurate The back end of the blade is safely contoured to avoid anything extending beyond the revolving body Body has a built-in honing guide for easy sharpening The blade is adjustable to cut the exact size in both dry & green wood. Eight sizes from 5/8" to 1" cut 2.3/4" long tenons Sizes 1.1/4" to 2" will cut 4.1/4" long tenons, for structural connections All have hex shanks; sizes 5/8" to 1" are for use in electric drill with a 3/8" chuck 1/4" to 2", need more torque to drive, use in larger electric drills with a 1/2" chuck
£99.99 inc VAT
VERITAS POWER TENON CUTTER - 7/8
VERITAS POWER TENON CUTTER - 7/8
Cut smooth, perfect tenons with radiused shoulders Cutters run vibration-free while being driven by an electric drill Yield the same accuracy when used with a hand brace Anodised aluminium body has been balanced to eliminate vibration integral level vial makes in-line cutting accurate The back end of the blade is safely contoured to avoid anything extending beyond the revolving body Body has a built-in honing guide for easy sharpening The blade is adjustable to cut the exact size in both dry & green wood. Eight sizes from 5/8" to 1" cut 2.3/4" long tenons Sizes 1.1/4" to 2" will cut 4.1/4" long tenons, for structural connections All have hex shanks; sizes 5/8" to 1" are for use in electric drill with a 3/8" chuck 1/4" to 2", need more torque to drive, use in larger electric drills with a 1/2" chuck
£107.99 inc VAT

VERITAS POWER TENON CUTTER BLADE
VERITAS POWER TENON CUTTER BLADE
Veritas replacement blade for Veritas power tenon cutters
£18.99 inc VAT
VERITAS REPL. HCS SCRUB PLANE BLADE  05P3504
VERITAS REPL. HCS SCRUB PLANE BLADE 05P3504
38mm(1.1/2") wide by 4.7mm(3/16") thick Edge is ground with a 75mm(3") radius for an aggressive cut High-carbon steel (HCS) blade (HRC 58-60)
£26.99 inc VAT

VERITAS ROUTER PLANE BLADE 1/2" POINTED  05P3805
VERITAS ROUTER PLANE BLADE 1/2" POINTED 05P3805
High carbon steel cutters 6.35mm(1/4") forged straight blade Two-piece 12.7mm(1/2") straight blade Two-piece 12.7mm(1/2") pointed blade (for final smoothing) Two-piece blade for ease of sharpening
£21.99 inc VAT
VERITAS ROUTER PLANE BLADE 1/2" STRAIGHT  05P3804
VERITAS ROUTER PLANE BLADE 1/2" STRAIGHT 05P3804
VERITAS ROUTER PLANE BLADE 1/2" STRAIGHT 05P3804
£21.99 inc VAT

VERITAS ROUTER PLANE BLADE 1/4" STRAIGHT  05P3803
VERITAS ROUTER PLANE BLADE 1/4" STRAIGHT 05P3803
High carbon steel cutters 6.35mm(1/4") forged straight blade Two-piece 12.7mm(1/2") straight blade Two-piece 12.7mm(1/2") pointed blade (for final smoothing) Two-piece blade for ease of sharpening
£22.99 inc VAT
VERITAS SMALL BLADE HOLDERVERITAS SMALL BLADE HOLDER
VERITAS SMALL BLADE HOLDER
Blade holder may be mounted in a honing guide, or used free hand for sharpening Holds short blades such as spokeshave blades when sharpening Blade is secured in holder by two rare-earth magnets Adjustable stop provides adjustment for blade projection Effectively transforms your short blade into something larger (38 x 100mm long) Made in Canada
£22.99 inc VAT

VERITAS TAPERED TENON CUTTER - 1/2
VERITAS TAPERED TENON CUTTER - 1/2
For putting tapered tenons on turnings, dowels or rustic furniture components Straight-edged blade tapers the ends Size given for each cutter is the minimum tenon diameter it will cut; the maximum is 1/2" greater 3/8", 1/2" and 5/8" sizes will cover most tenoning requirements for typical chair-making The curved blade (for dowel making) should be used with only the three smallest sizes
£49.99 inc VAT
VERITAS TAPERED TENON CUTTER - 3/8
VERITAS TAPERED TENON CUTTER - 3/8
For putting tapered tenons on turnings, dowels or rustic furniture components Straight-edged blade tapers the ends Size given for each cutter is the minimum tenon diameter it will cut; the maximum is 1/2" greater 3/8", 1/2" and 5/8" sizes will cover most tenoning requirements for typical chair-making The curved blade (for dowel making) should be used with only the three smallest sizes
£49.99 inc VAT

VERITAS TAPERED TENON CUTTER - 5/8
VERITAS TAPERED TENON CUTTER - 5/8
For putting tapered tenons on turnings, dowels or rustic furniture components Straight-edged blade tapers the ends Size given for each cutter is the minimum tenon diameter it will cut; the maximum is 1/2" greater 3/8", 1/2" and 5/8" sizes will cover most tenoning requirements for typical chair-making The curved blade (for dowel making) should be used with only the three smallest sizes
£49.99 inc VAT