Titebond III Ultimate Wood Glue

Titebond III Ultimate Wood Glue is the first one-part, water cleanup wood glue ever offered that is proven waterproof. The waterproof formula passes the ANSI/HPVA Type I water-resistance specification and offers superior bond strength, longer open assembly time and lower application temperature.

Titebond III is non-toxic, solvent free and cleans up with water - safer to use than traditional waterproof wood glues. It provides strong initial tack, sands easily without softening and is FDA approved for indirect food contact (cutting boards). The ultimate in wood glues - ideal for both interior and exterior applications. 

 

	Physical Properties (Typical)		TypeAdvanced Proprietary Polymer Calculated VOC: 5.6 g/L StateLiquid Weight/gallon9.22 lbs ColorTan Chalk temperature*Approx. 47°F Dried filmLight brown Flashpoint>200°F. Solids52% Freeze/thaw stabilityStable Viscosity4,200 cps pH2.5 Storage life12 months in tightly closed containers below 75°F. *Chalk temperature indicates the lowest recommended temperature at which the glue, air and materials can be during application, to assure a good bond.
	Application Guidelines		Application temperatureAbove 47°F. Open assembly time10 minutes (70°F./50%RH) Total assembly time20-25minutes (70°F./50%RH) Minimum required spreadApproximately 6 mils or 250 square feet per gallon Required clamping pressure Enough to bring joints tightly together (generally, 100-150 psi for softwoods, 125-175 psi for medium woods and 175-250 psi for hardwoods) Methods of application Plastic bottles for fine applications; glue may also be spread with a roller spreader or brush. Cleanup Damp cloth while glue is wet. Scrape off and sand dried excess. Patent Pending
	Bond Strength ASTM D-905 (On Hard Maple)		Temperature Strength psi % Wood Failure Room Temperature 4000 57
	Product Features		Passes ANSI/HPVA Type I water-resistance Waterproof formula that cleans up with water Superior strength - Strong initial tack Designed for interior and exterior applications Longer open assembly time Lower application temperature Unaffected by finishes FDA approved for indirect food contact
	Limitations		Not for continuous submersion or for use below the waterline. Not for structural or load bearing applications. Use when temperature, glue and materials are above 45°F. Store product below 75°F. Storage above this temperature may cause product to thicken and reduce the usable shelf life. If thickened, shake vigorously by firmly tapping bottle on a hard surface until product is restored to original form. Because of variances in the surfaces of treated lumber, it is a good idea to test for adhesion. Read MSDS before use. KEEP FROM FREEZING. KEEP OUT OF THE REACH OF CHILDREN.
	Caution Statement		No caution information is needed. Please refer to the Material Safety Data Sheet for further information.