Planet
Planet Plus -
A family business based Chandler's Ford, Planet Plus has been a leading force in the pen turning market for many years!
All of our rotur drive center's and pen kit's are made right here in the UK!
Grid
List
Planet Turners Sanding Packs 4 Grit Pack
Don't waste time tearing sheets of sandpaper into strips or looking for the grit you need! This convenient dispenser is loaded with four or five 1" x 20' rolls of cloth backed aluminum oxide abrasive. Perfect for spindle, pen, or any turning where small strips of abrasive are needed.Each dispenser pack contains one roll of each grit abrasive. Just pull out and tear off the length of abrasive strip...
Planet Turners Sanding Packs 5 Grit MESH Pack
Don't waste time tearing sheets of sandpaper into strips or looking for the grit you need! This convenient dispenser is loaded with four or five 1" x 20' rolls of cloth backed aluminum oxide abrasive. Perfect for spindle, pen, or any turning where small strips of abrasive are needed.Each dispenser pack contains one roll of each grit abrasive. Just pull out and tear off the length of abrasive strip...
Turners Sanding Packs 5 Grit Pack
Don't waste time tearing sheets of sandpaper into strips or looking for the grit you need! This convenient dispenser is loaded with four or five 1" x 20' rolls of cloth backed aluminum oxide abrasive. Perfect for spindle, pen, or any turning where small strips of abrasive are needed.Each dispenser pack contains one roll of each grit abrasive. Just pull out and tear off the length of abrasive strip...
Drill Press Hold Down
Drill Press Hold Down. For use on a Drill Press or on a Work Bench.
50 BLACK PEN REFILLS
50 BLACK PEN REFILLS
CHROME CIGAR PEN
Chrome Cigar Pen Kit
Classic Premium Gold Roller Ball Pen Each
Rotur roller ball pen. Designed to turn on the universal pen mandrel, gold plated 24ct
Gold Cigar Pen
Gold Cigar Pen kit
Pen Turning Drill Bit Set
Set of drills 6.8, 6.9, 7mm tin coated dril and 3 spacers for turning the roller ball and fountain pens.
Planet Deluxe Pen Turning Kits
Deluxe Colleted Pen Turning Kit
A Must If Your A Pro...
The new Colleted Pen Mandrel has been designed in the UK for pen turning profesionals. Very similar to the Universal Pen Mandrel, its unique quarter-turn action clamps the shaft in place accurately and its compleley dust free collet remains hidden.
The popular Universal Pen Mandrel Kit including:
Spacers and cones for turning...
PLANET GOLD 7MM PENCIL KIT
PLANET GOLD 7MM PENCIL KIT
Planet PBT01 Pen Blank Trimming Tool (7mm)
Used to square the ends of the pen blank prior to turning and
assembly. Mounts in drill chuck or universal pen mandrel.
Suitable for 7mm pens.
Planet PBTK04 Pen Blank Trimming Tool (8.5,9.5,10mm)
Used to square the ends of the pen blank prior to turning and
assembly. Mounts in drill chuck or universal pen mandrel.
Suitable for 8.5, 9.5 & 10mm pens.
Planet Universal Pen Turning Kit
Original Pen Turning Kit
The popular Universal Pen Mandrel Kit including:
Spacers and cones for turning a variety of pen kits
Pen Blank Trimming Tool for trimming the ends of the pen parts accurately
5 Quality Twist Top Ball Point Pen Kits
Quality Carrying Case
Instructions for turning and assembling pens
PREMIUM CHROME 7MM TWIST PEN PCT45
Silimline 7mm Rotur pen - with locking mechanism. Designed to turn on the universal and deluxe pen mandrel
PREMIUM CLASSIC GOLD FOUNTAIN PEN
Rotur fountain pen. Designed to turn on the universal pen mandrel, gold plated 24ct
PREMIUM GOLD 7MM TWIST SLIMLINE PEN
Silimline 7mm Rotur pen - with locking mechanism. Designed to turn on the universal and deluxe pen mandrel
Premium Gun Metal 7mm Twist Slimline pen
Silimline 7mm Rotur pen - with locking mechanism. Designed to turn on the universal and deluxe pen mandrel
Ultima 7mm Pen Kit (5 pack)
Key Features
7mm Pen
Slimline
Locking Mechanism
24ct Gold Plated
Slimline 7mm Rotur pen - with locking mechanism. Designed to turn on the universal and deluxe pen mandrel. Available in Gold Plated or Satin Chrome.
ULTIMA 7MM PEN KIT SATIN CHROME
Silimline 7mm Rotur pen - with locking mechanism. Designed to turn on the universal and deluxe pen mandrel.
Planet Cabinet Scraper 4' x 2'
Manufactured in Sheffield from flexible, high quality steel, and polished to give a smooth finish. They have a good edge retention and are re-sharpenable
Planet Cabinet Scraper 5' x 2 1/2'
Manufactured in Sheffield from flexible, high quality steel, and polished to give a smooth finish. They have a good edge retention and are re-sharpenable
Planet Cabinet scraper set
Manufactured in Sheffield from flexible,high quality steel, and polished to give a smooth finish. They have a good edge retention and are re-sharpenable Set includes: rectangle, concave/convex, kidney.
Marking Gauge 150mm
Mark perfect joints every time. The extra sharp replaceable cutter is hardened and marks a keen accurate line, preventing grain tear out during material removal. Up to 150mm depth of adjustment. Lightweight aluminum body with bright brass standard face. Engraved inch measurements on precision ground shaft.
Planet Depth Gauge 6 Inches
Traditional design. Full 6” / 150mm depth check. Etched and filled rule.
Planet Marking Gauge Rosewood
The marking gauge is made of selected rosewood with a protective lacquered finish, fitted with a brass knurled screw for more robust use. The gauge will mark with or across the grain.
Planet Mitre Square
This Mitre Square has spring steel blade secured to a double brass faced rosewood stock with four brass rivets. The tool is used for the accurate marking of mitre joints at 45 degrees or 135 degrees.
Planet Mortice Gauge Rosewood
Mortice gauge performs two operations. One side of its posts has a single pin for general marking with the grain or on end grain; its other side has double pins adjustable to approximately 50mm for layout of mortices. Made with solid brass hardware, wear plates, and fitted with milled thumb screw in head. Overall length 200mm.
Planet Protractor
Stainless steel protractor with high quality, clear, black graduations. Incorporates a 6” / 150mm rule. Degrees are marked from both ends of the scale.
Planet Steel Square
Conforms to BS939. Suitable for general workshop use.
Planet Try Square
Try square stock is made from best quality rosewood, spring steel blade & double brass facings. The blade is securely held by three brass rivets. Try squares are available in two sizes and can be used as external & internal square.
Planet Universal grinding gauge
Assists in the regrinding of hand tools, drill bits, etc. Angles include: 90 degree int, 90 degree ext, 55 degree int, 60 degree int, 60 degree ext and 120 degree int. Made from stainless steel with clear, etched and inked graduations
Vernier Depth Gauge 8"
This new depth guage has been designed for Planet with metirc and imperial measurements along the heavy duty rule and is tightened in place by a knurled thumbscrew through the body. Comes in a neat wooden box
Long series TiN coated Twist Drills
Tin coated dril and 3 spacers for turning the roller ball and fountain pens
Planet Long Series Sawtooth Forstner Bit
Long series sawtooth Forstner cutter
Sawtooth pattern, particularly suited for cutting down the grain. Long series - all sizes are a minimum of 150mm long, will produce over-lapping holes, resharpenable.
Planet Bench Stop
Mounts flush into any bench with minimum thickness of 22mm. Toothed plate is raised by thumbscrew to provide ‘stop’ against which work may be laid whilst planing, etc. Overall size 62 x 38mm.
Adjustable Stone Holder
Adjustable Stone Holder
Adjustable to hold stones from 5.½” to 8.½”. Chromed bars and non-slip rubber supports.
Planet DM1A 1MT Drill Chuck Mandrel (1/2' x 20tpi)
Suitable for mounting drill chucks in a lathe
Planet DM2A 2MT Drill Chuck Mandrel (1/2' x 20tpi)
Suitable for mounting drill chucks in a lathe
PEN MANDREL SUPPORT CENTRE 1 MT
The Pen Mandrel Support Centre has been designed and manufactured by PLANET here in the UK as an optimum way of holding and supporting the Pen Mandrel Shaft during the making of pens. This product is much the same as our Standard Rotating Centre (SD1/2), having 2 sealed bearings, a 12mm nose to represent 12mm bushings, is offered in 1MT & 2MT, precisely machined and designed to last and satisfy...
PEN MANDRELL SUPPORT CENTRE 2MT
The Pen Mandrel Support Centre has been designed and manufactured by PLANET here in the UK as an optimum way of holding and supporting the Pen Mandrel Shaft during the making of pens. This product is much the same as our Standard Rotating Centre (SD1/2), having 2 sealed bearings, a 12mm nose to represent 12mm bushings, is offered in 1MT & 2MT, precisely machined and designed to last and satisfy...
Planet 11222 Large Drive Centre 2 Prong 1 1/2' (38.1mm) 2MT
Suitable for all large types of spindle work.Integral points will not work loose. Removable with extractor ring.
4 prong for squared spindle ends, 2 prong for out of square spindle ends.
Planet 11242 Large Drive Centre 4 Prong 1 1/2' (38.1mm) 2MT
Suitable for all large types of spindle work.Integral points will not work loose. Removable with extractor ring.
4 prong for squared spindle ends, 2 prong for out of square spindle ends.
Planet Finial Mandrel Kit
A brand new product designed by Planet. The Finial Mandrel fits into the tail stock and offers support for the fine end of a finial whilst turning the rest of it. The Finial Mandrel Kit has 3 Delrin (nylon type) inserts with 3 sizes 3mm, 4.5mm & 6mm hole depending on the size of Finial being turned. They fit into the inner race of a free running bearing. Available in 1MT & 2MT
Planet Lathe Centre Alignment Tool
A brand new product from Planet. Aligns your headstock back with your tailstock after using it in 'outboard' mode.
Planet LBD1 Lace Bobbin Drive Centre 1/2' (12.7mm) 1MT
Tapered drive for lace bobbins, etc.
Mouth of drive is 1/2” square
