Kreg Precision Bandsaw Fence

Item: KMS7200

MPN: KMS7200

Kreg Precision Bandsaw Fence A New Level of Band Saw Accuracy  

pdfKreg Precision Bandsaw Fence 526834 Instructions

available Available for home delivery

£131.99 inc VAT
You may also need:
Kreg Precision Micro Adjuster KMS7215

add to wish list

Product Description

Mounts onto most 356mm (14') bandsaws. Features a rigid and easily removable aircraft-grade aluminium fence, that adjusts in 2 dimensions to compensate for blade drift. 356mm (14').

  • Adjusts to blade drift angle
  • Fits most 14' band saws
  • Can be modified to fit most any band saw
  • Allows for blade drift and perpendicularity
  • Can be changed to low-profile position
  • Fence accepts re-saw guides or Kreg Stops
  • Precision Lens Cursor for exact measurements

Most band saw blades don’t run perfectly perpendicular to the front of your table. There’s always just a little bit of “drift” that prevents you from getting precise cuts even when you are using a fence. The Kreg Precision Band Saw Fence easily adjusts to your blade’s drift angle to provide you with a new level of band saw accuracy. This fence mounts to most 14' band saws right out of the box and can be modified to fit many others by drilling a single hole in the aluminum mounting rail.

Never before has a band saw fence allowed you to accomplish such a wide variety of cuts. This fence adjusts both for blade drift and perpendicularity to the blade (essential when cutting thin veneers). In addition, the fence can be quickly changed to a low-profile position to allow the blade guides to be moved closer to the workpiece. Plus, the fence can accept re-saw guides or Kreg Stops for use in additional applications.

Rigid Design The aluminum fence is incredibly strong, straight, and built to last for years to come. The face and top of the fence contain T-slots for adding stops, re-saw guides, and more.

Easy to Remove When you don’t need the fence, remove it in seconds—no tools required! Just loosen the locking knob and lift the fence from the mounting rail, which is located below your table’s surface so it won’t get in the way.

Precision Lens Cursor Magnified and easy-to-read for even the smallest adjustments, the thin red line on the Precision Lens Cursor lets you accurately set up the fence for cutting veneer, tenons, and more.

Adjustable in Two Dimensions This fence is unique in that it adjusts to set up perfectly square to your table and blade. Two simple adjustments allow you to set the fence to match blade drift, greatly enhancing cutting accuracy.

Customer Reviews

By on
"Great bit of kit, wish I had bought this model ages ago. I have fitted it to a Record BS 350 bandsaw which is not a compatible model. How it was very easy to adapt to it without much trouble. Clamp in the correct position drill two 6mm holes and 6mm tap the bed. When changing the blade it takes about 2 minutes longer that before but the way I have done it means it goes back exactly in the same position. Love it."
By on
"This appears an excellent fence, designed by Mark Dukinske, author of the very clear book 'The New Complete Guide to the Bandsaw'. Unfortunately, I could not use it, as it requires horizontal fence attachment tappings on the side of the saw. My old Taiwanese saw has vertical tappings under the edge."
Star Rating 4
By on
"This is an excellent product and well worth the money. I did have two problems with it, one of which would have been difficult if not impossible to remedy in advance. This was the fixing to the front edge of the bandsaw table. I have a very old Willow 3-wheel bandsaw which is still in excellent condition but the table is not thick enough to accommodate the fixing holes in the mounting rail. Once I had had the table modified by adding a flat bar to the front edge, deep enough to allow for the fixing, all was well. The other problem is more irritating. This product was bought in the UK for use in the UK. However much many of us may regret the passing of Imperial measurements, the fact is that we are now metric. To buy a product in the UK these days with an Imperial measuring tape is just not acceptable. The actual function of the measuring tape, with its very fine divisions, together with the lens cursor, is very good indeed and, once calibrated, extremely accurate. But there should at the very least be the option of a self-adhesive measuring tape with metric divisions. But for this my rating would be higher - probably much higher."
Star Rating 3
By on
"While not ideal for a lurem band saw(front blade slot)kreg fence still worth the effort in refitting after blade change. Accurate,solid and a joy to use."
Star Rating 5



  • Precision Lens Cursor - Allows exact measurements for precise cuts
  • Blade Drift - 2 simple adjustments compensate for blade drift
  • Dimensions - Mounting Rail is 26' long, Fence is 18' long
  • Fence Material - Aircraft-grade aluminum
  • Finish - Anodized for easy clean-up
  • Adaptability - Pre-drilled holes on the mounting rail fit most 14' band saws, Can be modified to fit most any band saw
  • Includes - Mounting rail and hardware, clamp block with Precision Lens Cursor, (1) Kreg Heavy-Duty Trak, adhesive-back measuring tape and Owner's Manual with complete instructions for mounting and adjustment


Collect in Store

This item is available for collection.

Home Delivery

UK mainland delivery from FREE

check delivery cost

You Can Also...

Get help, write a review or share this product...

ask a questionwrite a reviewprint this page