Charnwood BD610 - 6” x 10” Belt & Disc Sander

Item: BD610

MPN: BD610

available Available for home delivery

£299.99 inc VAT
You may also need:
Rustins Sticky Off 60ml
Klingspor 150x1220mm Aluminium Oxide Abrasive Sanding Belts to fit BDS250-BD610
Klingspor Adhesive to Hook & Loop converter Discs

add to wish list

Product Description

A heavy duty workshop sander, with the traditional combination of belt and disc, driven via belt by a quiet 1hp induction motor.The large diameter disc is fitted with a sturdy aluminium table which is secured on both sides. Radiused guides allow the table to tilt to 45 degrees and be accurately locked at any angle. The table also has a T slot for the mitre guide, which is adjustable to 60 degrees each way. A sanding belt of this size would most commonly be used in the horizontal position, however it can be moved into the vertical position when required. The belt has a back stop fence with a removable plate, allowing the user to make their own plate to suit any application they have.The open end of the sanding belt can be used for finishing curved shapes and edges.When the time comes to replace the sanding belt there is a quick release tension lever and fine tracking adjustment to balance the new belt.Given that there may be times when you need to move this machine off the work bench, the design incorporates a pair of carry handles.A single dust collection outlet gives efficient extraction, from both the disc and belt, when connected to a suitable vacuum or extractor. The sander sits on 4 rubber feet or can be secured to a work bench using the 4 mounting points provided.Supplied with mitre guide, 1 x 80 grit sanding belt, 1 x 80 grit self adhesive sanding disc, 1.75m power cable and UK 3 pin plug.

Customer Reviews

By on
"Charnwood 6 x 10 sander. A good powerful solid machine Capable of hard work , the dust extraction works well, I would recommend."
Star Rating 5
By on
"This is a great sander and I am very pleased with it. Whilst its at £299 I would definitely recommend getting one, Even at £350 its not a bad buy, but it definitely pays to shop around online for the best deal possible."
Star Rating 5
By on
"Very pleased with the machine, easy to set up."
Star Rating 5
By on
"First impressions works very well, little set-up needed. After using for some time, a clunky noise appeared, there is play on the sanding disk on the shaft, hope it’s just a loose grub screw. "
Star Rating 4
Staff response...
"Sorry to hear you are having an issue, please contact us on 01935 822 207 & we will try to resolve this for you."


Disc Diameter 250mm (10”)Disc Speed 2850rpmWork Table Size 330mm x 170mmWork Table Tilt 90 – 45 degreesWork Table T Slot 16mm / 20mmBelt Size 150mm x 1220mm (6” x 48”)Belt Speed 550m/minMotor (Induction) 240v, 50hz 750w (1hp)Dust Extraction Outlet 50mm OD / 45mm IDOverall Dimensions (WxDxH) 770mm x 570mm x 400mmShipping Dimensions 740mm x 460mm x 470mmWeight 31kgRating HobbyWarranty 1 Year


Collect in Store

This item is available for collection.

Home Delivery

UK mainland delivery from £24.99

check delivery cost

You Can Also...

Get help, write a review or share this product...

ask a questionwrite a reviewprint this page