Charnwood 10 Inch Drum Sander with Floor Stand DS10 + 5 FREE Sanding Wraps!

Percent Off
Charnwood Drum Sander with Floor Stand DS10

Item: DS10/20

MPN: DS10/20

Charnwood 10" Drum Sander WITH 5-YEAR WARRANTY!

available Available for home delivery

£729.00 £649.99 inc VAT
You may also need:
Charnwood Replacement Drum Sander Pre-Cut Abrasive Wrap 80mm x 1.6m Pack of 5

add to wish list

Product Description

  •  10″ Sanding Width in a Single Pass
  •  20″ Sanding Width using 2 Passes
  •  Variable Speed Feed Conveyor
  •  Floor Stand Included
  •  Wheel Kit Included
  •  Launch Offer: 5 FREE Sanding Wraps Included

 After planing timber, the drum sander can be used to complete the finishing process. The workpiece is fed through the sander on a powered conveyor belt with a variable speed control to achieve an optimum finish on all timber types.

The single pass capacity of the machine is 250mm (10″). However, by removing the side plate (which is fitted with a quick removal mechanism) the workpiece can be fed through the now open end of the sander giving a capacity of up to 500mm (20″) by making 2 passes.

The height of the sanding drum is adjusted using a large hand wheel and the position read off the scale, which is graduated in both millimetres and inches.

Changing the sandpaper wrap is a simple task which requires no tools. Our sanding wraps are pre-cut with a taper at each which is clamped into each end of the drum. If you are using a sandpaper roll, you will need to make a template and cut the tapers before fitting.

Mobility is no problem thanks to the wheels and lifting handles provided.

Supplied with a fitted 80 grit sanding wrap, floor stand, wheels & lifting handles, dust port elbow, 2.0m cable and UK 3 pin plug.

Customer Reviews

By on
"Very good piece of kit. It has save me hours of sanding already on panels and smaller pieces. Great delivery service and easy to put together."
Star Rating 5
By on
"Good machine. Much better built than I thought it would be for the money. Takes a but more finesse to use than I expected especially on finer grit paper. Yardles were great. good price and great customer service."
Star Rating 5
By on
"Been using this machine for the past two weeks and so far its proved to be very good doing everything I expected. Seems to be solid and well made apart from the excess of washers used for spacing. As pointed out in the instructions, changing wraps is a bit tricky partly because the clamp which holds the tails end of the wrap is difficult to see - however using a small clamp to hold;d the wrap against the drum allows you to use both hands to manipulate the end of the wrap and makes the task much easier and quicker. Very good value for money."
Star Rating 5


Charnwood DS10/20 Specification

  • Maximum Width (1 Pass) 255mm (10″)
  • Maximum Width (2 Passes) 505mm (20″)
  • Maximum Workpiece Thickness 75mm (3″)
  • Minimum Workpiece Thickness 5mm (1/5″)
  • Minimum Length 65mm (2.6″)
  • Drum Motor (Induction) 230v, 50Hz 1100w (1.5hp), 240v, 50hz
  • Drum Speed 1440rpm
  • Drum Size (Diameter / Length) 132mm / 260mm
  • Conveyor Motor (DC) 50w (1/15hp)
  • Conveyor Speed (Variable) 0-3.5m/min
  • Dust Port Diameter 100mm
  • Dust Collection Minimum Requirement 1000m3/hour (50 Litres per second)
  • Assembled Dimensions (WxDxH) 900 x 590 x 1140mm
  • Shipping Dimensions (WxDxH) 800 x 640 x 640mm
  • Weight (Net/Gross) 72kg / 100kg
  • Assembly Time Required 1 hour
  • Rating Hobby
  • Product Guarantee 5 Years

 We recommend wearing a face mask or respirator during all sanding operations, even if a dust extraction system is in place. Don’t take chances with your health.

Collect in Store

This item is available for collection.

Home Delivery

UK mainland delivery from FREE

check delivery cost

You Can Also...

Get help, write a review or share this product...

ask a questionwrite a reviewprint this page