Water-Resistant D3 Wood Glue Fast Setting Joinery Adhesive

Yandles Water-Resistant D3 Wood Glue Fast Setting Joinery Adhesive

Item: TradebondD3

Write the first review

in stock Available for home delivery

Choose Size:
from £3.99 inc VAT

add to wish list

Product Description

Stronger Than Wood! Tradebond wood glue is a one-part PVA emulsion adhesive, specially formulated for wood bonding where a fast set, high bond strengths and excellent water resistance is required. Stronger Than Wood PVA adhesive bonds virtually all woods, wood veneers, and mouldings and high-pressure decorative laminates (i.e. Formica). It is also suitable for use with a radio frequency press.Characteristics

  •  Fast setting
  •  High bond strength.
  •  May be used with hot or cold presses.
  •  Easy to apply by brush, roller or serrated glue spreader
  •  Conforms to British Standard BS 4071 in respect of bond strength and resistance to sustained load.
  •  Conforms to the water-resistance requirements of British Standards BS EN204 to category D3.

 ApplicationThe adhesive, substrate and ambient temperature should ideally be a minimum of 20°C. The moisture content of the wood materials should be uniform and should not exceed 12%.SpreadingStronger Than Wood PVA Wood Glue can be applied by serrated glue spreader, roller or brush. Application is normally to one surface only at a rate of 150g/m²Open assembly timesMaximum 15 minutes depending on the materials to be bonded. Assembly times are dependant on ambient conditions and substrates used.PressingPressure must be applied whilst the adhesive is still wet and should be a minimum of 30psi (2kg/cm²) depending on type of wood and structure.Press timesPress times depend on adhesive coating and substrates. Typical figures are:Hotpress: Decorative laminate / plywood 70°C / 3-5 minutesCold press: Decorative laminate / plywood 20°C / 15-20 minutesPressure should be between 30 and 100 psi.

Application Examples

  • Furniture assembly
  •  Shopfitting / Bar fitting applications
  •  Internal marine applications
  •  General joinery applications
  •  Window / Door frame construction

Shelflife12 months in unopened packaging in a cool and dry storage place at temperatures between +5°C and +30°C.PROTECT FROM FROST.Technical DataBase:PVA emulsion adhesive  Consistency:Medium viscosity  Viscosity @ 23°C:115 ± 35 (Spindle 6, Speed 20).  Curing System:Moisture Cure / RF Cure  Colour:White, Clear when dried  Min. film forming temperature:8-11°C  Solids content:46 ± 1%  Specific gravity:1.09  pH value:2.5 – 3.5  Cleaning:Equipment should be cleaned with warm or cold water while the adhesive is still wet.

Collect in Store

This item is available for collection.

Home Delivery

UK mainland delivery from £3.99

check delivery cost

You Can Also...

Get help, write a review or share this product...

ask a questionwrite a reviewprint this page