• display as grid Grid
  • display as list List
Page: First | | 57 | 58 | 59 | 60 | 61 |

Flexcut PWS10 Standard Powerstrop Kit
This handy tool fits into any power drill. Simply apply the included buffing compound to the leather wheel and let the drill do the work of bringing your edge up to a polished surface.
£56.99 £45.59 inc VAT
Arkansas Profiled Slip Stone
Arkansas Profiled Slip Stone
These small profiled Slip Stones are traditionally used for sharpening carving tools but are useful for many other sharpening needs when you need a profiled edge. Stone measures 60 x 25 x 5mm Made of natural stones quarried in Arkansas. PLEASE NOTE THAT ARKANSAS STONE IS A NATURAL PRODUCT AND FLAWS IN THE STONE ARE ACCEPTED AS NORMAL, THESE FLAWS HAVE NO DETRIMENTAL EFFECT TO THE INTRGRITY OR PERFORMANCE...
£18.99 inc VAT

Arkansas Slip StoneArkansas Slip Stone
Arkansas Slip Stone
The Round Edge Slip Stones are traditionally used for sharpening carving tools but are useful for many other sharpening needs when you need a round edge. Made of natural stones quarried in Arkansas. PLEASE NOTE THAT ARKANSAS STONE IS A NATURAL PRODUCT AND FLAWS IN THE STONE ARE ACCEPTED AS NORMAL, THESE FLAWS HAVE NO DETRIMENTAL EFFECT TO THE INTRGRITY OR PERFORMANCE OF THE STONES IN USE. MADE IN...
£29.90 inc VAT
Arkansas Stone Honing Oil
Arkansas Stone Honing Oil
Highly recommended for use with Arkansas sharpening stone, Stubai honing oil will prolong the life of your stones and also produce a finer finish on your sharpened tools.
£11.99 inc VAT

Naniwa 1000 Grit Economical Waterstone
Naniwa 1000 Grit Economical Waterstone
The Naniwa Economical range of Waterstones are a good single grit sharpening stone at a great price. Your getting a genuine quality Naniwa product with a price tag of an economy stone. Like traditional Japanese Waterstones these require soaking prior to use and will cut very quickly. This 1000 grit stone is fine but if you are patient it will sharpen even very dull tools. However where this stone...
£25.99 inc VAT
Naniwa 600 Grit Nagura Dressing Stone
Naniwa 600 Grit Nagura Dressing Stone
The Naniwa dressing stone is an impressive 65mm x 47mm x 32mm in size, almost four times that of other stones on the market making it excellent value for money. Designed for the de-glazing of harder Waterstones and also used to produce a slurry prior to honing a tool on finer stones.
£9.99 inc VAT

Narex Sharpening stone ARKANSAS – natural
Narex Sharpening stone ARKANSAS – natural
American sharpening stones are natural sharpening stones of the finest grit. They are used as honing stones in combination with honing oil.
£94.99 inc VAT
Narex Special Honing Oil for Arkansas Stones
Narex Special Honing Oil for Arkansas Stones
Special honing oil is used for fine hand finish-sharpening on honing diamond desk and natural stones.
£9.99 inc VAT

Suehiro Japanese Carvers Profiled Waterstones 2hs-9Suehiro Japanese Carvers Profiled Waterstones 2hs-9
Suehiro Japanese Carvers Profiled Waterstones 2hs-9
Manufactured by Suehiro in Japan these top notch carvers stones feature multiple profiles for the sharpening of small carving tools, the side flats and the reverse can also be used to sharpen flat tools.
£19.99 inc VAT
Suehiro Japanese Carvers Tapered Gouge WaterstonesSuehiro Japanese Carvers Tapered Gouge Waterstones
Suehiro Japanese Carvers Tapered Gouge Waterstones
1000g Tapered sharpening stone for gouges
£39.99 inc VAT

Record Power 10' Wetstone Sharpening System / Grinder Package C/W Diamond Dresser
Sale
Record Power 10' Wetstone Sharpening System / Grinder Package C/W Diamond Dresser
Buy with confidence - Record Power Price Guarantee!
£239.99 from £219.99 inc VAT
Record Power 8' Wetstone Sharpening System / Grinder Package C/W Diamond Dresser
New lower price
Record Power 8' Wetstone Sharpening System / Grinder Package C/W Diamond Dresser
Buy with confidence - Record Power Price Guarantee!
from £159.99 inc VAT

Tormek T-4 Water Cooled Sharpening System with NVR Switch T4Tormek T-4 Water Cooled Sharpening System with NVR Switch T4
Special Offer
Tormek T-4 Water Cooled Sharpening System with NVR Switch T4
Tormek T-4 Water Cooled Sharpening System with NVR Switch
from £428.99 inc VAT
Tormek T-8 LIMITED EDITION 50TH ANNIVERSARY Water Cooled Sharpening System with Diamond WheelTormek T-8 LIMITED EDITION 50TH ANNIVERSARY Water Cooled Sharpening System with Diamond Wheel
Sold Out
Tormek T-8 LIMITED EDITION 50TH ANNIVERSARY Water Cooled Sharpening System with Diamond Wheel
Tormek T-8 Sharpening System - Limited 50-Year Anniversary Edition with 50-YEAR WARRANTY!
from £724.99 inc VAT

Tormek T-8 Water Cooled Sharpening SystemTormek T-8 Water Cooled Sharpening System
Tormek T-8 Water Cooled Sharpening System
Tormek T-8 Sharpening System
from £440.99 inc VAT
Irwin Marples MS750 3 Piece High Impact Chisel Set Splitproof Soft Touch: 13 19 & 25mm
£64.99 inc VAT

Robert Sorby 370A Modular Micro Spiralling Tool, 5 1/2' (140mm) Aluminium HandleRobert Sorby 370A Modular Micro Spiralling Tool, 5 1/2' (140mm) Aluminium Handle
Robert Sorby 370A Modular Micro Spiralling Tool, 5 1/2' (140mm) Aluminium Handle
 Robert Sorby 370A Modular Micro Spiralling Tool, 5 1/2' (140mm) 
£77.99 inc VAT
Robert Sorby 804CO5 Rim Cutter, fits 803H, 804H and 805HRobert Sorby 804CO5 Rim Cutter, fits 803H, 804H and 805H
Robert Sorby 804CO5 Rim Cutter, fits 803H, 804H and 805H
Robert Sorby Rim Cutter, fits 803H, 804H and 805H Hollowing Tools
£12.99 inc VAT

Robert Sorby 804CO9 Mushroom Cutter, fits 803H, 804H and 805HRobert Sorby 804CO9 Mushroom Cutter, fits 803H, 804H and 805H
British Made
Robert Sorby 804CO9 Mushroom Cutter, fits 803H, 804H and 805H
Robert Sorby 804CO9 Mushroom Cutter, fits 803H, 804H and 805H Hollowing Tools
£10.99 inc VAT
Robert Sorby 805C 3/16' (5mm) Captive Ring Tool Cutter, fits 804H and 805HRobert Sorby 805C 3/16' (5mm) Captive Ring Tool Cutter, fits 804H and 805H
British Made
Robert Sorby 805C 3/16' (5mm) Captive Ring Tool Cutter, fits 804H and 805H
Robert Sorby 805C 3/16' (5mm) Captive Ring Tool Cutter, fits 804H and 805H Tools
£12.99 inc VAT

Robert Sorby 805C 3/8' (10mm) Captive Ring Tool Cutter, fits  804H and 805H
British Made
Robert Sorby 805C 3/8' (10mm) Captive Ring Tool Cutter, fits 804H and 805H
Robert Sorby 805C 3/8' (10mm) Captive Ring Tool Cutter, fits  804H and 805H tools
£12.99 inc VAT
Robert Sorby Proedge 472 Tip Holder / Cutter Holder
Robert Sorby Proedge 472 Tip Holder / Cutter Holder
Robert Sorby 472 Tip Holder / Cutter Holder for sharpening HSS tips on a Proedge
£12.99 inc VAT

'Tarrant' Light Pull Drive Replacement Stepped Drill Bit 3mm/6mm x 120mm
£12.99 inc VAT
Charnwood 1MT / 2MT Revolving Centre
Charnwood 1MT / 2MT Revolving Centre
Choose your size below, you will receive one centre only
£19.99 inc VAT

PEN MANDREL SUPPORT CENTRE 1 MT
PEN MANDREL SUPPORT CENTRE 1 MT
The Pen Mandrel Support Centre has been designed and manufactured by PLANET here in the UK as an optimum way of holding and supporting the Pen Mandrel Shaft during the making of pens. This product is much the same as our Standard Rotating Centre (SD1/2), having 2 sealed bearings, a 12mm nose to represent 12mm bushings, is offered in 1MT & 2MT, precisely machined and designed to last and satisfy...
£29.99 inc VAT
PEN MANDRELL SUPPORT CENTRE 2MT
PEN MANDRELL SUPPORT CENTRE 2MT
The Pen Mandrel Support Centre has been designed and manufactured by PLANET here in the UK as an optimum way of holding and supporting the Pen Mandrel Shaft during the making of pens. This product is much the same as our Standard Rotating Centre (SD1/2), having 2 sealed bearings, a 12mm nose to represent 12mm bushings, is offered in 1MT & 2MT, precisely machined and designed to last and satisfy...
£29.99 inc VAT

Planet 11222 Large Drive Centre 2 Prong 1 1/2' (38.1mm) 2MT
Suitable for all large types of spindle work.Integral points will not work loose. Removable with extractor ring. 4 prong for squared spindle ends, 2 prong for out of square spindle ends.
£37.99 £26.49 inc VAT
Planet 11242 Large Drive Centre 4 Prong 1 1/2' (38.1mm) 2MT
Planet 11242 Large Drive Centre 4 Prong 1 1/2' (38.1mm) 2MT
Suitable for all large types of spindle work.Integral points will not work loose. Removable with extractor ring. 4 prong for squared spindle ends, 2 prong for out of square spindle ends.
£39.99 inc VAT

Planet Deluxe Rotating Centre
Planet Deluxe Rotating Centre
Deluxe Rotating Centre
£49.99 inc VAT
Planet Finial Support Mandrel Kit
Planet Finial Support Mandrel Kit
A brand new product designed by Planet. The Finial Mandrel fits into the tail stock and offers support for the fine end of a finial whilst turning the rest of it. The Finial Mandrel Kit has 3 Delrin (nylon type) inserts with 3 sizes 3mm, 4.5mm & 6mm hole depending on the size of Finial being turned. They fit into the inner race of a free running bearing. Available in 1MT & 2MT
£31.99 inc VAT

Planet Hollow Rotating Centre
Rotating centre with 5/16” bore for long hole boring.Based around our standard duty configuration. Also useful for spindle turning when there is a danger of a centre point splitting the stock. Set comprises: Hollow rotating centre, nose cone for use as standard centre, centring rod.
£47.89 £31.99 inc VAT
Planet Lathe Centre Alignment ToolPlanet Lathe Centre Alignment Tool
Planet Lathe Centre Alignment Tool
A brand new product from Planet. Aligns your headstock back with your tailstock after using it in 'outboard' mode.
£16.99 inc VAT

Planet LBD1 Lace Bobbin Drive Centre 1/2' (12.7mm) 1MT
Tapered drive for lace bobbins, etc. Mouth of drive is 1/2” square
£21.99 £14.99 inc VAT
Planet LBD2 Lace Bobbin Drive Centre 1/2' (12.7mm) 2MT
Tapered drive for lace bobbins, etc. Mouth of drive is 1/2” square
£22.99 £15.79 inc VAT

Planet LD1 Light Duty Rotating Centre  (60Deg) (22mm) 1MT
Planet LD1 Light Duty Rotating Centre (60Deg) (22mm) 1MT
Light Duty Rotating centre. Designed to facilitate the turning of small items. 22mm dia. head with 60 deg. point. Twin deep groove ball races.
£21.99 inc VAT
Planet Mini Drive centre
Planet Mini Drive centre
Mini Drive Centre With Integral Points 9mm x 4 prong
£14.99 inc VAT

Planet Piloted Drive Centre 1' (25.4mm)
1” diameter 4 prong head. Head relieved behind flutes to prevent binding. Supplied with inter-changeable point, pilot and hex key.
£32.99 from £22.59 inc VAT
Planet Standard Drive Centres 1MT
Planet Standard Drive Centres 1MT
Suitable for all types of spindle work.Integral points will not work loose. Removable with extractor ring. 4 prong for squared spindle ends, 2 prong for out of square spindle ends.
from £15.99 inc VAT

Planet Standard Drive Centres 2MT
Planet Standard Drive Centres 2MT
Suitable for all types of spindle work.Integral points will not work loose. Removable with extractor ring. 4 prong for squared spindle ends, 2 prong for out of square spindle ends.
from £15.99 inc VAT
Planet Tarrant Light Pull Drive Kit inc stepped drill 3mm/6mm x 120mmPlanet Tarrant Light Pull Drive Kit inc stepped drill 3mm/6mm x 120mm
£19.99 inc VAT

Planet Tarrant Light Pull Drive SPARE Stepped Drill 3mm/6mm x 120mm
Planet Tarrant Light Pull Drive SPARE Stepped Drill 3mm/6mm x 120mm
Planet Light Pull Drive Spare Stepped Drill 3mm/6mm x 120mm
£12.99 inc VAT
Record Power 4 Prong Drive Center 2MT
Sold Out
Record Power 4 Prong Drive Center 2MT
Buy with confidence - Record Power Price Guarantee!
£26.99 inc VAT

Record Power Spur Centre
Record Power Spur Centre
Buy with confidence - Record Power Price Guarantee!
£21.99 inc VAT
Record Power Standard Woodworm ScrewRecord Power Standard Woodworm Screw
Record Power Standard Woodworm Screw
Buy with confidence - Record Power Price Guarantee!
£17.59 inc VAT
Page: First | | 57 | 58 | 59 | 60 | 61 |