Record Power RPMS-R-MK2 Heavy Cast Router Table DISCONTINUED

Sold Out
Record Power RPMS-R-MK2 Heavy Cast Router Table DISCONTINUED

Item: RPMS-R-MK2

Record Power RPMS-R-MK2 Heavy Cast Router Table with Sliding Table

Write the first review

Available for home delivery

available Available

Product Description

A good router table not only extends the versatility of your machine, it makes repeatable and accurate work much easier. Using a table with properly guarded fences for your work can also improve safety. Our popular table has been upgraded in several key areas to provide even greater value for money.

The RPMS-R Router Table is a heavy and well specified accessory suitable for a wide variety of routers and applications. The heart of this table is its finely ground cast iron table which provides a solid and stable foundation for all functions. When you consider the weight, power and speeds of modern 1/2” routers the importance of a solid table should not be underestimated and weighing in at 54kg the RPMS-R is one of the heaviest on the market, with the wide base and angled legs adding even greater stability.

In addition to the main cast table, there is a sliding aluminium table with cross cut mitre fence and hold down clamp for undertaking end grain work. The main fences can be set independently and feature micro adjustment. The table has three pairs of tapped holes so the fence can be easily repositioned to accommodate different sizes of workpiece. Also, when profiling, the fence can be reversed so the operator does not need to lean over the sliding table and can work comfortably from the other side of the machine utilising the main cast table itself. A dust extraction hood is fitted to the main fence and guard area and a no-volt release switch is included.

Includes:RPMS-CX Collet Extension for RPMS-RRRP £49.99

Top Features


Table features 3 sets of holes so the fence mount can be slotted to accommodate a wide range of fence positions.

Mounting System

The universal router mounting system can accept virtually any router due to the adjustable clamps and two sets of T-slots either side of the aperture.

Gas Springs

Gas springs help lift the cast iron table, allowing easy access to the underside of the router table.


A heavy duty clamp holds the timber in position preventing any movement or slipping while undertaking end grain work and can be re-positioned and clamped at an angle when required.

Pressure Pad Included

The pressure pad helps to hold the workpiece against the fence to eliminate slipping.

Sliding Carriage

The sliding carriage makes accurate end grain work much easier.

Dust Extraction

An extraction hood is fitted, with a 57 mm diameter outlet, designed to draw dust and chippings away from the user.

Independent Adjustment

Both fences operate independently and offer micro-adjustment.

Collet Extension

This collet provides a 2” extension on a router with a 1/2” collet. An essential accessory when using a router table because without this extension the router cutter would not have sufficient height to sit far enough above the table for use. (Included)


  • Cast Iron Table Size: 783 x 250 mm
  • Extraction Port Diameter: 57 mm
  • Weight: 54 kg
  • Size: H850 x W784 x D560 mm


  • Router Table
  • Sliding Carriage
  • NVR Switch
  • Reversible Fence
  • Collet Extension
  • Mounting System
  • Pressure Pad
  • Clamp
  • Gas Struts
Call to order

Call us now for the best price on +44 (0)1935 822207.

You Can Also...

Get help, write a review or share this product...

ask a questionwrite a reviewprint this pagebookmark and share