Kreg Concealed Hinge Jig KHI-HINGE

"Good tool worked as described cutting nice clean holes "

"great bit of kit, simple and effective. I used it to fit some Ikea hinges and made an additional plywood jig for the 8mm knibs which they use instead of screws."

"Brilliant service and product. Thank you."

"Will be using it shortly but the quality of the Jig is good so I anticipate it being a good addition to my tool kit."

"Brilliant tool, would recommend to anyone attempting to fit own cupboard doors with concealed hinges "

"I ordered my one of my kitchen units wrong hinged so bought this first time I have used one, it did the job spot on"

"Great quality product supplied with equally great service."

"I did a test cut first on an old cabinet door aligning and clamping the jig in the exact position I would need the holes, a perfect clean and spot-on cut, which then gave me confidence to cut the holes in the new wall cabinet doors - The soft-close hinges fitted perfectly and lined up exactly when fitted to the cabinet carcass. An excellent jig, which I would recommend. "

"Excellent product makes fitting replacement cupboard doors a dream"

"Great kit, good price"

"Perfect jig for concealed hinges, quick and easy to adjust and depth stop ideal to quickly make progress without worrying about drilling to deep."

"I am just a keen DIYer I have used the product once and I am pleased with it so will be using more thank you"

"Made setting up holes for 18mm birch ply doors very simple indeed. May seem a lot to pay for relatively simple kit and construction, but takes all the hassle out of the job."

"Brilliant bit of kit really quick and easy to use"

"The jig worked very well and the result was spot-on. There are a few points to be aware of though: 1. I used the jig on some doors that have quite a large chamfer on the edge and so had to be very careful that the hole didn't go too deep. Careful measuring showed that if the standard stop was used the recess would punch through. A suitable washer placed under the stop prevented this while still allowing a hole deep enough for the hinge. Thicker doors and / or no chamfer would be present no problems I suppose. 2. The cutter wasn't great with MDF, a bit "slow", however the final finish was very good. 3. The position of the screw pilot hole location points did not match the hinges I was using. Clearly there is more than one "standard" fixing screw position for the various hinge manufacturers. Not a major problem but it would be nice if the tool tried to cover a variety of standard designs. All in all, a good tool that could be better with a couple minor upgrades."

"Good product and quality "

"brilliant bit of kit .."

"Just great"

"Just great"