NEW Tormek T-8 Water Cooled Precision Sharpening System!

NEW Tormek T-8 Water Cooled Precision Sharpening System!

The NEW Tormek T-8 Available NOW from Yandles!

TORMEK T-8 maximizes the precision thanks to the revolutionary fully cast housing which guarantees minimal play for the Universal support.

This gives you the best conditions possible to succeed with your sharpening. Tormek's unique drive system is efficient and manages to hold a constant speed, even under full load.

The Tormek Original Grindstone sharpens all qualities of steel, including HSS. The machine features a number of elaborated details, like instant stone locking with EzyLock, water trough with lift and a removable magnet scraper for efficient cleansing.

Tormek T8 PRE-ORDER TODAY

 


 

The key word when sharpening the Tormek way is repeatability. The tools are guided in jigs, you remove only a minute fraction of the steel at each sharpening, which makes it fast, and your tools last longer.


 

FIRST LOOK!

The first look at the Tormek T-8! Last weekend we had the FIRST EVER UK DEMO of the T8 here at Yandles & we weren't disappointed to say the least!

With many upgraded features the Tormek T-8 gets the thumbs up form us!

Tormek T8 PRE-ORDER TODAY

Features Of The T-8

  • Fully cast housing
  • Unique drive system
  • EzyLock, water trough
  • Magnet scraper

MORE INFORMATION?

More New Features!

  • 7 Year Warranty
  • Universal Support
  • Updated design
  • Advanced Water Trough
  • Water chute

Tormek T8 PRE-ORDER TODAY

 

In more depth:

On the new T-8 model, Tormek has integrated the previous mounted sleeves for the Universal Support into the fully cast housing. That guarantees minimal play for the Universal Support; an innovation which improves the control of the sharpening and increases the accuracy of the final results.


With an updated design and several upgraded details, the T-8 gives you the best conditions possible for a successful sharpening with top results.
The Advanced Water Trough has been further improved with a screw lift for an easier fitting and a magnetic scraper for efficient cleansing.


For long tools that drip water over the edge of the lip (like chef's knives and planer blades), you can add the water chute. Set the widest edge of the chute onto the tab in the middle of the lip of the trough and the water chute will direct the water back into the trough from even the longest tools.

The removable scraper incorporates a strong magnet, which attracts the steel particles ground from the tools being sharpened. This keeps your stone clean and cutting more freely. These small steel particles would otherwise be pressed into the stone surface and can affect the sharpening. When you clean the water trough, you'll find that most of the steel will be located on the magnet. When you remove the scraper, the magnet will release the steel particles and you can easily clean the trough.

PRE-ORDER THE Tormek T-8 TODAY!


Yandles where lucky enough to host the FIRST EVER UK Demo of the Tormek T-8!
 Tormek T-8  Tormek T-8  Tormek T-8
 Tormek T8  Tormek T8  Tormek T8
Tormek T8 Tormek T8 Tormek T8

Spec:
  • Dimensions: Width 270 mm (10 5/8"), Depth 270 mm (10 5/8"), Height 330 mm (12")
  • Weight: Shipping weight 17,8 kg (39 lbs), Machine only 14.8 kg (32.6 lbs)
  • Grindstone: Tormek Original Grindstone, Aluminium oxide, 250×50 mm (10"×2") 90 rpm, torque 14.7 Nm
  • Leather Honing Wheel: 220×31 mm (8 5/8"×1¼")
  • Main Shaft: Stainless steel main shaft, stone hardware and EzyLock.
  • Housing: Zinc cast top and frame. Sides in ABS plastic.
  • Motor: Industrial single phase, 200 W (input) 230 V, 50 Hz or 115 V, 60 Hz.

16th May 2016

Back to news