Charnwood W629 10'' Cast Iron Table Saw

Product Description

Cast Iron Table Saw with a 10" diameter blade. The 2018 Model is now available with an upgraded quick action precision rip fence.  Quiet Induction Motor Cast Iron Precision Ground Table Extension Tables as Standard Equipment Sliding Carriage as Standard Equipment Separate Handwheels for Blade Adjustment Quick Action Precision Rip Fence 100mm Dust Extraction Outlet Solid Floorstand Base Included Optional Wheel Kit Available First launched in 2015, the W629 has now become our best selling table saw model. The cutting capacities are big enough for any hobby workshop, providing a level of accuracy only normally found on industrial machinery, with a compact foot print suited to the average sized workshop. The main table is precision ground cast iron, and has 2 fabricated side extension tables to give impressive cutting capacities, perfect for the smaller workshop. The induction motor turns the blade via a drive belt which reduces noise and increases accuracy.Blade height and blade angle are controlled using 2 separate hand wheels. The sliding carriage, included as standard, is a pleasure to use with a cast iron bed travelling on 4 bearing guides. Any angle can be set on the long support fence. A screw clamp holds the work secure and a flip over length stop is fitted for repeat cuts.Supplied with 36 tooth TCT sawblade, sliding carriage, extension tables, sliding mitre fence, floorstand, adjustable feet, cable and plug.There are 3 ways to configure the table saw:The sliding carriage can be fitted on either side of the blade so that you can work on the left or right.If you are not using the sliding carriage, you can fit one extension table on either side of the blade.For compact storage the extension tables and sliding carriage can be quickly removed, (2 minutes). They reassemble without any further setting up required.SpecificationMain Table Size 420mm x 635mmTable Size (with Extensions) 1000mm x 635mmMaximum Ripping Width Using Fence 730mmCrosscut Table Size 400mm x 180mmMaximum Crosscutting Width 500mm (680mm using reverse table)Blade Tilt 90 - 45 degreesCutting Depth at 90 degrees 80mmCutting Depth at 45 degrees 64mmBlade Diameter 250mmBlade Bore 30mmWork Table Height 845mmMitre Guide T-Slot Width 15/19mmMitre Guide T-Slot Depth 7mmMotor (induction) 2200w (3hp) / 240vNo-Load Blade Speed 4000 rpmMinimum Blade Width (Kerf) 3.0mmDimensions (WxDxH) 1480mm x 1000mm x 1100mmWeight 110KgRating Light TradeWarranty 1 Year It is highly recommended that a dust extractor is used at all times with this saw to prevent the harmful build up of dust and chips. The hose kit supplied collects dust from the sawguard and takes it to the single 100mm diameter hose connection point at the back of the machine.Please note: It is not possible to use a stacked dado set with this saw.

View other products in Table Saws »