Charnwood 8" Cast Iron Table Saw with Extension Tables

Best Seller
Charnwood Charnwood 8" Cast Iron Table Saw with Extension Tables

Item: W619

Charnwood W619 Cst Iron Saw

available Available

£599.99 inc VAT

add to wish list
updown

Product Description

Cast Iron Table Saw with an 8" diameter blade. The 2018 Model is now available with an upgraded quick action precision rip fence.  Quiet Induction Motor Cast Iron Precision Ground Table Extension Tables as Standard Equipment Sliding Carriage as Standard Equipment Separate Hand wheels for Blade Adjustment Quick Action Precision Rip Fence 100mm Dust Extraction Outlet Solid Floor stand Base Included Optional Wheel Kit Available W619 Table saw is a compact, high quality table saw with a quiet induction motor. The main table is precision ground cast iron, and has 2 fabricated side extension tables to give impressive cutting capacities, perfect for the smaller workshop. The induction motor turns the blade via a drive belt which reduces noise and increases accuracy. Blade height and blade angle are controlled using 2 separate hand wheels. The sliding carriage, included as standard, is a joy to use with a cast iron bed travelling on 4 bearing guides. Any angle can be set on the long support fence. A screw clamp holds the work secure and a flip over length stop is fitted for repeat cuts.Supplied with 18 tooth TCT sawblade, sliding carriage, extension tables, floor stand, adjustable feet, push stick, cable and plug.There are 3 ways to configure the table saw:The sliding carriage can be fitted on either side of the blade so that you can work on the left or right.If you are not using the sliding carriage, you can fit one extension table on either side of the blade.For compact storage the extension tables and sliding carriage can be quickly removed, (2 minutes). They reassemble without any further setting up required.SpecificationMain Table Size 530mm x 1000mmMaximum Ripping Width Using Fence 730mmCrosscut Table Size 400mm x 180mmMaximum Crosscutting Width 600mm (700mm Using Reverse Table)Blade Tilt 90 - 45 degreesCutting Depth at 90 degrees 60mmCutting Depth at 45 degrees 47mmBlade Diameter 200mmBlade Bore 30mmWork Table Height 860mmMitre Guide T-Slot Width 15/19mmMitre Guide T-Slot Depth 7mmMotor (induction) 1100w (1.5hp) / 240vNo-Load Blade Speed 4700 rpmMinimum Blade Width (Kerf) 2.6mmDimensions (WxDxH) 1460 x 1010 x 1030mmWeight 90KgRating Light TradeWarranty 1 Year It is highly recommended that a dust extractor is used at all times with this saw to prevent the harmful build up of dust and chips. The hose kit supplied collects dust from the sawguard and takes it to the single 100mm diameter hose connection point at the back of the machine.Please note: It is not possible to use a stacked dado set with this saw.

Customer Reviews

By on
"I have been looking for a more refined and accurate replacement for my old "site saw" which has served me well for years. This saw was on offer otherwise I would find it difficult to justify the expense. The saw arrived within two days and the courier was helpful delivering it where it was easy to manipulate it into my workshop. It was extremely well packaged and it was fairly easy to assemble, although the instructions weren't the best I've encountered and could be improved. The saw is much quieter than my old one, it has a smaller blade but cut a selection of 2" oak with ease and with the precision I was looking for. I have placed the side tables at either side of the cast saw table and have stored the sliding table aside to be used when required. The set up for the saw is easy when a little thought is applied as it would be for any machine. I have used Yandles several times for materials and equipment and have always found their service second to none and will always recommend them. "
Star Rating 5
By on
"This is my 3rd piece of Charnwood equipment. Although some might say it is quite basic, it does what you would expect from a saw of this size. It is well built, compact and quiet running. I would recommend it."
Star Rating 4

Specification

Specification
Main Table Size 530mm x 1000mm
Maximum Ripping Width Using Fence 720mm
Crosscut Table Size 400mm x 180mm
Maximum Crosscutting Width 600mm Blade
Tilt 90 - 45 degrees
Cutting Depth at 90 degrees 60mm
Cutting Depth at 45 degrees 40mm
Blade Diameter 200mm
Blade Bore 30mm
Work Table Height 910mm Motor (induction) 1100w / 240v
Built up dimensions (WxDxH) 1460mm x 1010mm x 1030mm
Weight 69Kg
Rating Light Trade

Video

Collect in Store

This item is available for collection.

Home Delivery

UK mainland delivery from £39.99

check delivery cost

You Can Also...

Get help, write a review or share this product...

ask a questionwrite a reviewprint this pagebookmark and share