Liberon Palette Wood Dye

The Liberon Palette Wood Dye

Liberon Palette Wood Dyes are ideal for dying / colouring all interior bare woodwork, whilst leaving the natural beauty of the grain visible. For use prior to oil, wax, varnish and French polish finishes – they are suitable for both soft and hardwoods. Quick and uniform results can be achieved on large and small surfaces such as furniture, floors, doors, cupboards, frames etc and being ‘EN 71 – Part 3 approved’ they are also safe for use on toys. Available in a range of wood shades, the different colours can be mixed together to create unique shades.

Performance:
– Water based dye for interior woodwork.
– Suitable for use on floors.
– Leaves the grain visible.
– Suitable for use on both hard and softwoods.
– EN 71 approved – safe for toys.
– Endorsed by the Guild of Master Craftsmen.
– Can be mixed with Liberon Natural Finish Varnishes.

Usage: interior
Coverage: 250ml = 2-4m2
Application: Foam applicator or brush
Drying Time: Minimum of 2 hours
Tool Cleaning: Water

Advice

• Note: more than two coats of dye may affect the final finish.
• Libéron Palette Wood Dye may be added to Libéron water-based varnishes to tint or colour the varnish.
• Caution must be taken when using water-based finishes over Libéron Palette Wood Dye. Keep brush strokes to a minimum as overbrushing may lift out the colour.
• Do not mix a water-based dye with a spirit-based dye.
• The colour bar may not be a true representation of the actual colour.
• Wear gloves to avoid staining skin.
• Important: Always test product on a spare surface or inconspicuous area for colour, compatibility and end result. Different types of wood produce different results.
• Remove as much of the product as possible from the tools after use. Do not dispose of residues and washing water/ solvents in the sink, toilet, sewer, bin, etc., in order to avoid discharge into the environment.