Osmo WR Base Coat
- Extremely water repellent
- Resistant to blue stain, rot and insect attack
- Reduces wood swelling and shrinkage
- No future application necessary
- Oil-based, brush or roller applied only
Dry Time
12 hours
Coverage
5-6m²/L with one coat
Osmo WR Base Coat is not to be used alone, instead it is a clear impregnation to protect wood against rot, blue stain and insect attack.
Compatible with all common types of glue and putty (except silicone products). We recommend galvanized, anti-corrosive fasteners.
To guarantee full protection (against UV rays) and the long-lasting beauty of wood, a top coat (e.g. with One Coat Only HSPlus, Natural Oil Woodstain, Country Colour, Opaque White Gloss or UV-Protection-Oil) is required after the impregnation has completely dried.
If the coloured surface should have an external surface protection (film protection), we recommend for non-biocidal wood finishes (One Coat Only HSPlus and Country Colour) a top coat with UV-Protection-Oil Extra.*
*Do not coat white finished surfaces with UV-Protection-Oil Extra.
Using power washers will severely decrease the coverage of the finish and general or multi-purpose cleaners will increase the frequency of maintenance and recoating.
Wood surface must be clean, dry and frost-free (moisture content max. 20%).
Osmo WR Base Coat is ready to use, please do not thin. Stir well before use. Clean old microporous stains thoroughly. Old paints and lacquers must be completely removed. As a general rule, wear a dust mask during sanding works. Reseal container after use. Do not allow this product to reach aquatic environments, the ground or the sewer system.
Protect environment (e.g. soil, plants, aquatic environment) from splashes of Osmo WR Base Coat 4001.
Do not apply in damp conditions or if rain is imminent.
