- 5mm Wide Standard Parting Tool
- Rectangle Section 5mm x 12mm For Maximum Rigidity
- Double Bevelled Cutting Tip
- Blade Made From M2 HSS Steel
- Cryo Hardened To 65HRC
- Contoured Handles Made From Ash
- Distinctive Stainless Steel Ferrules
- Blade Length 130mm
- Handle Length 220mm
- Supplied In A Transparent Hanging Storage Tube
Intended Use
Used to part the finished project off from the waste material, the parallel sides make for a rigid tool that is comfortable to use. The 5mm wide tool reduces the amount of waste removed when parting. An essential consideration if the timber is expensive.
Can be used to form beads, fillets and spigots ready for chuck mounting.
For making deep grooves when sizing spindle projects.
Cryo Hardened M2 HSS Woodturning Chisel
Cryogenic treatment of M2 HSS means this steel has been subjected to a complex immersion procedure at temperatures as low as minus 195C. The result is that the High Speed steel has a hardness of 65HRC. That is extremely hard. Typical HSS chisels are 58HRC. A higher hardness level improves wear resistance and edge-holding ability, ensuring that your tools stay sharper for longer, typically 5 times longer than standard HSS chisels.
With M2C chisels you spend more time turning: less time sharpening. When it is time for sharpening the blades are remarkably fast and easy to sharpen, as they allow you to remove less material to produce a perfect razor sharp edge.
With handles made from Ash, distinctive stainless steel ferrules and laser etched blades. The blades are sharpened, polished and ready to go.
Reviews
There are no reviews yet.