NEW Milescraft TrackSawSquare Perfect 90° Cuts with Self-Centering Design

Increase the speed and accuracy in how you create square 90° cuts with the Milescraft TrackSawSquare. The product quickly connects to the bottom of the proprietary Milescraft guide rail design, and pulls itself into perfect square using trapezoid alignment ridges. From a single measurement mark, you can rip entire boards straight and true from one end to the other.

The symmetrical design of the TrackSawSquare means it can be used on either end of your track saw setup. Anti-Tip Stabiliser provides more support when cutting and the entire low-profile body can be use on boards 1/2″ (12.7mm) and thicker while surface mounted.

Features

• Perfect 90° Cuts – Self-centering design pulls the rail square to 90° from edge of work piece
• Low-Profile – Thin profile design reduces weight and allows for use on boards 1/2″ (12.7mm) and thicker
• Anti-Tip – Built in stabilizer bar catches the end of your work piece to prevent tipping
• Clamp Compatible – Recessed notches allow the square to be used in tandem with Milescraft TrackClamps
• Exclusively for the Milescraft TrackSawGuide and Milescraft GuideRails

Specification

• Square Material – Machined Aluminum
• Length – 340mm (13-3/8″)
• Width – 89mm (3-1/2″)
• T-Bolt Head – 12.5mm x 20mm
• Compatible Tracks – Milescraft TrackSawGuide, Milescraft GuideRails and Kreg Guide Rails
• Compatible Clamps – Milescraft TrackClamps and Milescraft CompactTrackClamps

Please note: Images showing Milescraft TrackSawGuide and Saw are for illustrative purposes only. Item is the TrackSawSquare addition.