Accessories & Fittings

Accessories & Fittings

  • display as grid Grid
  • display as list List
Page: 1 | 2 | 3 |

Record Power CamVac 2M of 100mm Dust Extraction Hose LH Helix
Record Power CamVac 2M of 100mm Dust Extraction Hose LH Helix
Buy with confidence - Record Power Price Guarantee!
£27.49 inc VAT

Record Power DX1500B 100-32mm Reducer 2m 32mm Hose for HPLV Extractors
Record Power DX1500B 100-32mm Reducer 2m 32mm Hose for HPLV Extractors
Buy with confidence - Record Power Price Guarantee!
£27.99 inc VAT



Bandsaw Under Table Extraction KitBandsaw Under Table Extraction Kit
Bandsaw Under Table Extraction Kit
Improve your bandsaw extraction by up to 40%!
£69.99 inc VAT

Bayonet Fitting Adaptor for CamVacBayonet Fitting Adaptor for CamVac
Bayonet Fitting Adaptor for CamVac
Bayonet Fitting for Camvac Machines
£15.99 inc VAT
CamVac 2.5' - 14' Floor tool with rear wheels CVA250-15-100
CamVac 2.5' - 14' Floor tool with rear wheels CVA250-15-100
Buy with confidence - Record Power Price Guarantee!
£12.99 inc VAT

CamVac 2.5' Round Dusting Brush (Black) CVA250-13-100
CamVac 2.5' Round Dusting Brush (Black) CVA250-13-100
Buy with confidence - Record Power Price Guarantee!
£9.99 inc VAT
CamVac 286 Caster Set for GV286 & GV336 Extractors CVA286-27-100
CamVac 286 Caster Set for GV286 & GV336 Extractors CVA286-27-100
Buy with confidence - Record Power Price Guarantee!
£57.99 inc VAT

CamVac 386 Caster Set for GV386 Extractors CVA386-27-100
CamVac 386 Caster Set for GV386 Extractors CVA386-27-100
Buy with confidence - Record Power Price Guarantee!
£59.99 inc VAT
CamVac 486 Caster Set for GV486 Dust Extractors
CamVac 486 Caster Set for GV486 Dust Extractors
Buy with confidence - Record Power Price Guarantee!
£65.99 inc VAT

CamVac Black plastic 'T' fitting CVA250-50-103
CamVac Black plastic 'T' fitting CVA250-50-103
Buy with confidence - Record Power Price Guarantee!
£6.99 inc VAT
Charnwood 100E Elbow, 90 degrees for 100mm hose
Charnwood 100E Elbow, 90 degrees for 100mm hose
When running hose around the workshop, it is sometimes easier to use an elbow at the corners rather than run the flexible hose around. Two 100mm hose clamps are required to fasten the hoses securely. For use with 100mm diameter hose only.
£8.99 inc VAT

Charnwood 100HC Hose Clamp for 100mm Diameter Hose
Sold Out
Charnwood 100HC Hose Clamp for 100mm Diameter Hose
Wire type hose clamp for securing hose to machinery or fittings For use with 100mm diameter hose.
£1.99 inc VAT
Charnwood 100QAHC Quick Action Hose Clamp
New lower price
Charnwood 100QAHC Quick Action Hose Clamp
Quick action bridged hose clamp. This ultimate hose clamp has a quick action lever, to lock it in place allowing the hose to be released from one machine machine and clamped onto the next one instantly. In addition the design features a bridge which steps over the wire helix inside the hose, giving a truly powerful grip. A worm drive, adjustable by screwdriver can be used to fine tune the clamp to...
£13.99 inc VAT

Charnwood 100SL 100mm Sleeve
Charnwood 100SL 100mm Sleeve
100mm Connector Sleeve. This handy new product allows you to join two other fittings together without having to use hose. i.e. Joining a 100Y Y-Piece onto a 100E Elbow.The sleeve is tapered internally so there is no need for hose clamps.
£3.99 inc VAT
Charnwood 100SP Hose Splice 100mm Diameter
New lower price
Charnwood 100SP Hose Splice 100mm Diameter
Joining splice used to join two lengths of 100mm diameter hose togethor, for example when a run of over 10 metres in length is required. Two 100mm hose clamps are required to fasten the hoses securely. For use with 100mm diameter hose only.
£5.99 inc VAT

Charnwood 125HC Hose Clamp for 125mm Diameter Hose
New lower price
Charnwood 125HC Hose Clamp for 125mm Diameter Hose
Worm drive hose clamp for securing hose to machinery or fittings For use with 125mm diameter hose.
£2.99 inc VAT
Charnwood 150HC Hose Clamp for 150mm Diameter Hose
New lower price
Charnwood 150HC Hose Clamp for 150mm Diameter Hose
Worm drive hose clamp for securing hose to machinery or fittings For use with 150mm diameter hose.
£2.99 inc VAT

Charnwood 4 Piece Stepped Reducer 100mm to 35mm 100/35RC
Charnwood 4 Piece Stepped Reducer 100mm to 35mm 100/35RC
Universal Reducer. This Reducer consists of 4 pieces which can be joined and used as a single reducer or split to give a variety of options. The fittings are all tapered so a millimetre each way should be OK to give decent fit. Can be used to reduce form 100mm diameter hose down to; 1 2 3 4 5 Outside Diameter 104 68 45 40 35 Inside Diameter 100 62 40 34 28
£5.99 inc VAT
Charnwood 75HC Hose Clamp for 65 or 75mm Diameter Hose
Charnwood 75HC Hose Clamp for 65 or 75mm Diameter Hose
Worm drive hose clamp for securing hose to machinery or fittings For use with both 65mm or 75mm diameter hoses.
£1.99 inc VAT

Charnwood Bench Sweeper dust collection kit
Charnwood Bench Sweeper dust collection kit
Dust extractor hose attachment. A light weight wand made from tough plastic with a brush on the collection end. Used for collecting dust and chippings from benches in the workshop. The handle is adjustable to find the most comfortable angle in use. The connection end is 100mm diameter to suit our standard 100FLEX transparent flexible hose, a hose clamp may also be required to secure the hose to the...
£24.99 inc VAT
Charnwood Bracket for Wall Mounting 100mm Hose
Charnwood Bracket for Wall Mounting 100mm Hose
Plastic Bracket for Wall Mounting Hose. For use with 100mm diameter hose, or smaller, the wall hanging bracket will allow you to fix a hose line to the wall or ceiling. Comes complete with fixing screws and raw plugs.
£0.99 inc VAT

Charnwood Dust hood 160mm x 160mm, 100mm diameter outlet
New lower price
Charnwood Dust hood 160mm x 160mm, 100mm diameter outlet
Often used to adapt older machinery which did not originally have extraction points fitted or to make collection funnels for other types of machinery such as lathes. A 100mm diameter hose clamp should be used to secure the hose. Dimensions 160mm x 160mm with a 100mm diameter outlet.
£4.99 inc VAT
Charnwood Dust Hood 250mm x 110mm, 100mm diameter outlet
Charnwood Dust Hood 250mm x 110mm, 100mm diameter outlet
A plastic dust collector hood with a wide mouth at one end and a round hose connection at the other. Suitable for use with standard 100mm diameter flexible hose. You may need a hose clamp to secure the hose to the round end, our product ref. 100HC. Ideal for Collecting from small lathes, sanding discs or any other machinery which did not originally come supplied with a purpose made dust collection...
£9.99 inc VAT

Charnwood Dust hood 310mm x 310mm, 100mm diameter outlet
New lower price
Charnwood Dust hood 310mm x 310mm, 100mm diameter outlet
Often used to adapt older machinery which did not originally have extraction points fitted or to make collection funnels for other types of machinery such as lathes. A 100mm hose clamp should be used to secure the hose. Dimensions 310mm x 310mm with a 100mm diameter outlet.
£6.99 inc VAT
Charnwood Dust Hood 410mm x 320mm, 260 depth, 100mm outlet
Sold Out
Charnwood Dust Hood 410mm x 320mm, 260 depth, 100mm outlet
Dust Collection Hood. Used to adapt older machinery which did not originally have extraction points fitted or to make collection funnels for other types of machinery such as lathes or Radial arm saws which can be difficult to get efficient extraction from. 100mm connection point for use with 100mm hose. A hose clamp is required to fasten the hose securely. DH410 Opening size 410mm x 320mm,...
£21.99 inc VAT

Charnwood Floor Sweep Dust Hood
New lower price
Charnwood Floor Sweep Dust Hood
As an alternative to using a floor sweeping attachment for your dust extractor, this collection hood sits on the floor against a wall of the workshop with a hose attached to your extractor. Use a trusty broom to sweep a pile of dust and chippings into the mouth of the hood and it will all be sucked away and deposited in the collection bag. The opening is 540mm wide and the outlet is 100mm diameter,...
£9.99 inc VAT
Charnwood Floor Sweeper dust collection kit
Charnwood Floor Sweeper dust collection kit
Floor sweeping attachment. For collecting dust and chippings from the floor of the workshop. This lightweight yet tough attachment has an opening 150mm x 250mm wide which can be simply moved across the floor, in the same way as a domestic vacuum cleaner. The overall length is 1 metre which prevents the user from having to stoop down when sweeping the floor. For further comfort the handle is also...
£49.99 inc VAT

Charnwood Hose Clamp 50mm Diameter
Charnwood Hose Clamp 50mm Diameter
Worm drive hose clamp for securing hose to machinery or fittings For use with both 50mm and 40mm diameter hoses.
£1.99 inc VAT
Charnwood Quick connector hose cuff 100mm diameter
Charnwood Quick connector hose cuff 100mm diameter
Quick Connector: Fits onto the end of a hose and becomes a quick action fitting. Ideal for moving an extractor between several machines with 100mm outlets. Simply screws into the end of our 100FLEX hose and has a tapered fitting at the other end which creates a push-fit with any 100mm outlet on machinery. 100QC is for 100mm diameter hose only. Please note: The 100QC has a right-handed thread and...
£5.99 inc VAT

Charnwood Reducing cone 100mm to 125mm
New lower price
Charnwood Reducing cone 100mm to 125mm
Connector for stepping from 100mm to 125mm. This plastic connector can be used for stepping up or down in hose sizes. It can also be used for connecting a hose line to machinery with a different sized outlet. The table below shows the outside diameter, OD, and the inside diameter, ID, for each end of the connector
£5.99 inc VAT
Charnwood Reducing cone 100mm to 50mmCharnwood Reducing cone 100mm to 50mm
New lower price
Charnwood Reducing cone 100mm to 50mm
Used for stepping down or up in hose size and used for connecting a hose line to machinery with a different sized outlet.The table shows the outside diameter, OD, and the inside diameter, ID, for each end of the connector.It is recommended that 100mm diameter hose is always used from the extractor to the dust producing machine and then the reducing cone fitted.Using any length of hose of less than...
£5.99 inc VAT

Charnwood Reducing cone 100mm to 58mm
New lower price
Charnwood Reducing cone 100mm to 58mm
Reducing cone used to step down or up in hose size and used to for connecting to machinery with different sized outlets. It is recommended that 100mm diameter hose is always used from the extractor to the dust producing machine and then the reducing cone fitted. Using any length of hose of less than 100mm diameter will reduce the performance of the extractor and should therefore be kept to a...
£5.99 inc VAT
Charnwood Reducing cone 100mm to 63mm
New lower price
Charnwood Reducing cone 100mm to 63mm
Reducing cone used to step down or up in hose size and used to for connecting to machinery with different sized outlets. It is recommended that 100mm diameter hose is always used from the extractor to the dust producing machine and then the reducing cone fitted. Using any length of hose of less than 100mm diameter will reduce the performance of the extractor and should therefore be kept to a...
£5.99 inc VAT

Charnwood Reducing cone 100mm to 67mm
Charnwood Reducing cone 100mm to 67mm
Reducing cone used to step down or up in hose size and used to for connecting to machinery with different sized outlets. It is recommended that 100mm diameter hose is always used from the extractor to the dust producing machine and then the reducing cone fitted. Using any length of hose of less than 100mm diameter will reduce the performance of the extractor and should therefore be kept to a...
£5.99 inc VAT
Charnwood Reducing cone 100mm to 75mm
Charnwood Reducing cone 100mm to 75mm
Reducing cone used to step down or up in hose size and used to for connecting to machinery with different sized outlets. It is recommended that 100mm diameter hose is always used from the extractor to the dust producing machine and then the reducing cone fitted. Using any length of hose of less than 100mm diameter will reduce the performance of the extractor and should therefore be kept to a...
£5.99 inc VAT

Charnwood Reducing cone 75mm to 50mm
New lower price
Charnwood Reducing cone 75mm to 50mm
Reducing cone used to step down or up in hose size and used to for connecting to machinery with different sized outlets. It is recommended that 100mm diameter hose is always used from the extractor to the dust producing machine and then the reducing cone fitted. Using any length of hose of less than 100mm diameter will reduce the performance of the extractor and should therefore be kept to a...
£5.99 inc VAT
Charnwood Reducing cone 75mm to 63mm
New lower price
Charnwood Reducing cone 75mm to 63mm
Reducing cone used to step down or up in hose size and used to for connecting to machinery with different sized outlets. It is recommended that 100mm diameter hose is always used from the extractor to the dust producing machine and then the reducing cone fitted. Using any length of hose of less than 100mm diameter will reduce the performance of the extractor and should therefore be kept to a...
£3.99 inc VAT

Charnwood Shut off gate with 100mm connections
Charnwood Shut off gate with 100mm connections
When more than one hose line has been set up, it is advisable to close off all the inactive lines using these gates to ensure maximum airflow along the active line. Two 100mm hose clamps are required to fasten the hoses securely. For use with 100mm hose only.
£7.99 inc VAT
Charnwood Shut off gate with 125mm connections
New lower price
Charnwood Shut off gate with 125mm connections
When more than one hose line has been set up, it is advisable to close off all the inactive lines using these gates to ensure maximum airflow along the active line. Two 125mm hose clamps are required to fasten the hoses securely to the tapered fitting. For use with 125mm hose only.
£8.99 inc VAT

Charnwood Stepped Reducing cone 150, 125, 100, 75, 63, 50 & 25mm
New lower price
Charnwood Stepped Reducing cone 150, 125, 100, 75, 63, 50 & 25mm
A Stepped reducing cone used to step down or up in hose size and used for connecting to machinery with different sized outlets. This reducer has 7 steps so that any combination of two sizes can be achieved. For example to get a reducer form 125mm (5") down to 75mm (3") it is necesary to cut off the unwanted parts just leaving the middle steps.A hose clamp should be used to fasten hoses to the...
£14.99 inc VAT
Charnwood T-piece with 3 x 100mm outlets
Charnwood T-piece with 3 x 100mm outlets
T shaped branch: To split a hose line into two branches when creating multiple connections. Sometimes the T shape is an advantage when creating a hose network, however the airflow is not as efficient as with the Y shaped branch.
£7.99 inc VAT
Page: 1 | 2 | 3 |