• display as grid Grid
  • display as list List

Charnwood Drill Chuck, 13mm Capacity, MT1 Taper, DC13MT1
Best Seller
Charnwood Drill Chuck, 13mm Capacity, MT1 Taper, DC13MT1
Woodturners drill chuck. 13mm diameter drilling capacity, with No.1 Morse taper (MT1) fitting.Supplied with chuck key. Video
£19.99 inc VAT
Charnwood Drill Chuck, 16mm Capacity, MT2 Taper, DC16MT2
Charnwood Drill Chuck, 16mm Capacity, MT2 Taper, DC16MT2
Woodturners drill chuck. 16mm diameter drilling capacity, with No.2 Morse taper (MT2) fitting.Supplied with chuck key. Video
£19.99 inc VAT

Planet DM1A 1MT Drill Chuck Mandrel (1/2' x 20tpi)
Planet DM1A 1MT Drill Chuck Mandrel (1/2' x 20tpi)
Suitable for mounting drill chucks in a lathe
£8.87 inc VAT
Planet DM2A 2MT Drill Chuck Mandrel (1/2' x 20tpi)
Planet DM2A 2MT Drill Chuck Mandrel (1/2' x 20tpi)
Suitable for mounting drill chucks in a lathe
£8.87 inc VAT

RECORD POWER 1/2" DRILL CHUCK WITH NO.1 M.T.ARBOR
RECORD POWER 1/2" DRILL CHUCK WITH NO.1 M.T.ARBOR
For drilling accurately through the centre of the workpiece on the lathe, there is no better option than a drill chuck. Designed to hold drill bits, expansive cutters, Forstner bits and other hexagonal shaft bits. They can also be used in the headstock to hold small work such as pen blanks, thanks to the precision made engineering jaws, which ensure a central grip.
£29.99 inc VAT
RECORD POWER 1/2" GEARED DRILL CHUCK COMPLETE WITH NO.2 MORSE TAPER ARBOR
RECORD POWER 1/2" GEARED DRILL CHUCK COMPLETE WITH NO.2 MORSE TAPER ARBOR
For drilling accurately through the centre of the workpiece on the lathe, there is no better option than a drill chuck. Designed to hold drill bits, expansive cutters, Forstner bits and other hexagonal shaft bits. They can also be used in the headstock to hold small work such as pen blanks, thanks to the precision made engineering jaws, which ensure a central grip.
£24.99 inc VAT

RECORD POWER 3/4" GEARED DRILL CHUCK COMPLETE WITH NO.2 MORSE TAPER ARBOR
RECORD POWER 3/4" GEARED DRILL CHUCK COMPLETE WITH NO.2 MORSE TAPER ARBOR
For drilling accurately through the centre of the workpiece on the lathe, there is no better option than a drill chuck. Designed to hold drill bits, expansive cutters, Forstner bits and other hexagonal shaft bits. They can also be used in the headstock to hold small work such as pen blanks, thanks to the precision made engineering jaws, which ensure a central grip.
£34.99 inc VAT
RECORD POWER CWA152 3/4' Drill Chuck - 1 Morse Taper
RECORD POWER CWA152 3/4' Drill Chuck - 1 Morse Taper
RECORD POWER CWA152 3/4" Drill Chuck - 1 Morse Taper
£34.99 inc VAT