Charnwood W030 Spindle Moulder with sliding Carriage - Package Deals

Charnwood W030 Spindle Moulder with sliding Carraige

UK delivery available from £39.99

Choose Package:
from £664.99inc vat
Quantity:

Cast Iron Main Table Cast Iron Tenonning Table Cast Iron Cutter Hood 4 Speeds; Softwood, Hardwood, Routing, Sanding Maximum Tooling Diameter 160mm Independently Adjustable Fences 100mm Diameter Extraction Outlet

OFFER - FREE 1/2'' Routing Collet


Fitting neatly into the gap between the heaviest router table and an industrial sized spindle moulder this machine is ideally suited to small professional workshops.
A precision ground cast iron table, a steel base cabinet and a 2hp induction motor are the basic ingredients which make up this fantastic recently upgraded spindle moulder. The height of the spindle, which is a standard 30mm diameter, is controlled by the large hand wheel which can then be locked in position.
A simple belt change selects the correct spindle speed for the tooling.

The new 4 speed version provides even more versatility;
    1500rpm - Drum Sanding * 4500rpm - Moulding Hardwoods 6500rpm - Moulding Softwoods 8500rpm - Routing **
The cutter hood is cast iron with a dust outlet at the centre providing efficient extraction for this machine which can produce a high volume of dust and chips. An extractor with 1000 cubic metres an hour airflow is recommended to cope.
The two aluminium fences are adjustable to set the width of the opening, to suit the cutters being used. The outfeed fence can also be stepped out, controlled by a fine pitch thread adjuster, for operations where the complete edge of the workpiece is being removed. Fully adjustable guards are connected to a hinged plate which can quickly be lifted to allow clear access to change the tooling.
The sliding carriage consists of a cast iron table with four bearing guides running along an aluminium extrusion. The fence angle can be set accurately between 90 and 45 degrees with a useful stop to quickly return to 90 degrees again. A hold down clamp and a length stop complete the equipment.


SPECIAL OFFER : Order now and receive a FREE Routing adaptor to allow 1/2" shank router bits to be used. Worth £49 !!


Supplied with sliding carriage, Set of spindle shims, 4 adjustable height rubber feet, cable and plug.
Runs off any standard 13amp, 240v electric supply.

W030 Standard:

W030 + Sliding Carriage

OFFER - FREE 1/2'' Routing Collet

W030P

Package Includes;
W040 Spindle Moulder with Sliding beam
W030RC 1/2'' Routing Collet
CB9830 Cutterblock with Straight Knives& 6 Profiles
W030SD Sanding Drum Kit with 3 Sizes of Drum

W030P2

Package Includes;
W030 Spindle Moulder with Sliding carriage
W030RC 1/2'' Routing Collet
CB9830 Cutterblock with Straight Knives & 6 Profiles
W030SD Sanding Drum Kit with 3 Sizes of Drum
RCB10030: Rebate Block with Spur Cutters
W520: Universal Wheel Base

Specification
Motor (induction)     1500w, 240v
Main table size     600mm x 400mm
Sliding table size     400mm x 180mm
Spindle diameter     30mm
Speeds     4 (1500, 4500, 6500 & 8500rpm)
Vertical stroke     110mm
Table aperture diameter     160mm
Table aperture depth     50mm
Table height     870mm
Fence size     125mm x 700mm
Dust extraction outlet     100mm
Dimensions (WxDxH)     830mm x 1070mm x 1280mm
Weight     95kg
Rating     Light trade
Warranty     1 Year

 

 

Special Offer
Charnwood W030 Spindle Moulder with sliding Carriage - Package Deals

Click on image to enlarge

 

 

« Back to Spindle Moulders