Yandles PVA D3 Water Resistant Joinery Adhesive

Yandles essentials Yandles PVA D3 Water Resistant Joinery Adhesive

Item: PVA D3

Write the first review

Available for home delivery

in stock Available

Choose Size:
from £2.99 inc VAT

add to wish list

Product Description

Stronger Than Wood PVA wood glue is a one part PVA emulsion adhesive, specially formulated for wood bonding where a fast set, high bond strengths and excellent water resistance is required. Stronger Than Wood PVA adhesive bonds virtually all woods, wood veneers, and mouldings and high pressure decorative laminates (i.e. Formica). It is also suitable for use with a radio frequency press.


  • Fast setting
  •  High bond strength.
  •  May be used with hot or cold presses.
  •  Easy to apply by brush, roller or serrated glue spreader
  •  Conforms to British Standard BS 4071 in respect of bond strength and resistance to sustained load.
  •  Conforms to the water resistance requirements of British Standards BS EN204 to category D3.



Bonding conditions

The adhesive, substrate and ambient temperature should ideally be a minimum of 20°C. The moisture content of the wood materials should be uniform and should not exceed 12%.


Stonger Than Wood PVA Wood Glue can be applied by serrated glue spreader, roller or brush. Application is normally to one surface only at a rate of 150g/m²

Open assembly times

Maximum 15 minutes depending on the materials to be bonded. Assembly times are dependant on ambient conditions and substrates used.


Pressure must be applied whilst the adhesive is still wet and should be a minimum of 30psi (2kg/cm²) depending on type of wood and structure.

Press times

Press times required depend on adhesive coating and substrates. Typical figures are:

Hot press: Decorative laminate / plywood 70°C / 3-5 minutes

Cold press: Decorative laminate / plywood 20°C / 15-20 minutes

Pressure should be between 30 and 100 psi.

Application Examples

Furniture assembly.



• Shop fitting / Bar fitting applications.


• Internal marine applications.


• General joinery applications.


• Window / Door frame construction.


Stronger Than Wood PVA Wood Glue - Technical Data - Page 2


12 months in unopened packaging in a cool and dry storage place at temperatures between +5°C and +30°C.


Technical Data


PVA emulsion adhesive




Medium viscosity



Viscosity @ 23°C:

115 ± 35 (Spindle 6, Speed 20).



Curing System:

Moisture Cure / RF Cure




White, Clear when dried



Min. film forming temperature:




Solids content:

46 ± 1%



Specific gravity:




pH value:

2.5 – 3.5




Equipment should be cleaned with warm or cold water while the adhesive is still wet.

Collect in Store

This item is available for collection.

Home Delivery

UK mainland delivery from £6.49

check delivery cost

You Can Also...

Get help, write a review or share this product...

ask a questionwrite a reviewprint this pagebookmark and share