Green Oak Featheredge Cladding

Cracking in Green Oak

As Oak dries out over time, it can develop cracks and splits known as shakes. These tiny cracks run along the grain of the wood, which means that they do not affect its structural integrity. This cracking process happens faster in warmer weather, as the sun and wind speed up the drying process and can even cause shakes to form on recently cut green oak. As such, these should not be seen as faults, as it is a natural process. It is possible to reduce cracking in green oak by adding wood oil for protection. One of the main reasons for posts to rot is the constant wetting and drying of the post. To help extend the life of the post, you can slope the soil or concrete the post is set in so that water doesn't gather at the base of the post. Sealing the post with oil at the level it goes in the ground also helps extend the life as it reduces the moisture absorption into the post.

What is Green Oak?

Green Oak or Fresh Sawn Oak is a type of timber that is cut fresh from the log. This material ranges in colour from pale pink to honey-hued, and over time weathers to a light grey. This type of oak can be used to create frames that are long-lasting, typically lasting more than 100 years. Green Oak also has a much smaller carbon footprint than most other building materials, making it an environmentally friendly choice. Thanks to careful forest management practices such as those outlined by the Forestry Stewardship Council (FSC) or the Programme for the Endorsement of Forest Certification (PEFC), new Oak trees are able to be grown alongside existing trees in a way that ensures healthy forests for years to come, making Oak a renewable building material.

Delivery

Timber Delivery Rates for Mainland UK start from Bench slats - £11.99 Large Timber - £29.99 Double Pallet - £119.99(up to 2.4m) Triple Pallet - £169.00 (up to 3.6m). Green oak is delivered by pallet force deliveries on a two-day service, although this can vary depending on demand. The costs are determined by the length of the timber and pallet spaces. Green oak is heavy and it is your responsibility to lift it off the lorry (the driver is under no obligation to help). Please ensure you have the necessary equipment or manpower to unload the lorry. This may require more than one person. Our office can advise on approximate weights. If there are access issues please advise prior to delivery and we can arrange necessary transport although this may occur a surcharge. We will call before dispatch once the order is ready to organise a delivery day. We book in all deliveries and Pallet force will call on the day of delivery to give a rough delivery time. Local delivery can be organised on our flat bed. Hi ab delivery can organised at an additional cost. Please call 01935 822207 option 3 or email timber@yandles.co.uk All deliveries must be accepted in person or there could be a re-delivery fee. Please accept our apologies, but for the following postcodes, delivery at the price quoted can only be unloaded by mechanical means (forklift etc.). If it needs to be manually unloaded, please email timber@yandles.co.uk and we can look at alternative delivery methods. FY0, FY1, FY2, FY3, FY4, FY5, FY6, FY7, FY8, HR1, HR2, HR3, HR4, HR5, HR6, HR7, HR8, HR9, G1, G11, G12, G13, G14, G15, G2, G20, G21, G22, G23, G3, G31, G32, G33, G34, G4, G40, G41, G42, G43, G44, G45, G46, G5, G51, G52, G53, G58, G60, G61, G62, G63, G64, G65, G66, G67, G68, G69, G70, G71, G72, G73, G74, G75, G76, G77, G78, G79, G80, G81, G82, G83, G84, G9, G90, GU1, GU10, GU2, GU3, GU4, GU5, GU6, GU7, GU8, GU9, KT1, KT10, KT11, KT17, KT18, KT19, KT2, KT20, KT21, KT22, KT23, KT24, KT3, KT4, KT5, KT6, KT7, KT9, ML1, ML2, ML3, ML4, ML5, ML6, ML7, PR0, PR1, PR11, PR2, PR25, PR26, PR3, PR4, PR5, PR6, PR7, PR8, PR9, RH1, RH2, RH3, RH4, RH5, RH6, RH7, RH8, RH9, WA3, WA4, WA5, WA55, WA6, WA7, WA13, WA14, WA15, WA16

Planing

We plane all our Green Oak ex-inch. This means we plane it as thick as it will go from the original section size. In order to achieve a smooth finish, it is necessary to plane down the surface by a certain amount - typically around 4-6 mm. However, this means that the final product will be slightly smaller in size than it was originally. When it comes to planing green oak, there are several important factors to consider. First, unlike many other types of wood, green oak has high levels of tannins that can react with metals and cause unsightly blue stains. In addition, because green oak is quite heavy and difficult to handle, it tends to get stuck in thicknessers and can cause burn marks or white marks on the surface. For these reasons, we use a hand planer when working with this kind of wood.