Hampshire Sheen Pro Black Gloss Lacquer Spray 400ml

Basic Application:
This deep black lacquer will produce a high strength gloss finish. These are the steps we recommend to get started.
– Sand your work down smooth to at least 400 grit and ensure surface is free from dust, grease and moisture;
– Prepare the surface well with a suitable sealer and ensure it has fully dried. We recommend our Pro Spray Sealer when using this product;
– Shake can with the cap on for at least two minutes before use. Protect lathe and surfaces;
– Avoid breathing spray – Use appropriate PPE and use in a well ventilated area;
– Apply light coats 200mm from the piece, giving time for the lacquer to dry between coats. Two coats is usually sufficient;
– Under normal conditions, this Professional Lacquer can be mechanically buffed in under 3 hours.
– For a glass-like finish, use abrasive pastes and creams according to manufacturers instructions.

DANGER: Contains Hydrocarbons, C9, aromatics, xylene, n-butyl acetate. Extremely flammable aerosol. Pressurised container: May burst if heated. Causes skin irritation. Causes serious eye irritation. May cause drowsiness or dizziness. May cause respiratory irritation Harmful to aquatic life with long lasting effects. Keep out of reach of children. Do not breathe spray. Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Do not pierce or burn, even after use. Do not spray on an open flame or other ignition source. Protect from sunlight. Do not expose to temperatures exceeding 50 °C/122 °F. Dispose of contents/container in accordance with local regulations.