Verum Satin Chrome Rule – 300mm (12″)

Verum steel rule with satin chrome finish and photo etched markings. These double-sided rules feature both metric and imperial graduations. They come with a handy hanging hole and are supplied in a protective sleeve.

The clean crisp engineered rules are of the highest quality with clear photo etched markings, subdivided in mm with lines denoting 5mm increments, and numbers signifying every 10mm accrual. The opposite edge is subdivided again into 0.5mm increments for the most accurate of work. The back of the rule is Imperial and marked with 10th, 16th, 20th, 32nd, 64th and figured inches.

The Verum Satin Chrome 300mm Rule will act as a good reference straight edge and can be used for forming free flowing curves for workshop drawings and will return back flat. They can also be used around the workshop for the removal of glue squeeze-out and the removal of gummed paper veneer tape without staining acid rich timbers (but it may be worth having a second rule for these uses).

Made in Japan to exacting standards.

Specifications:

• Double sided
• Metric and Imperial Measurements
• Imperial Side marked with 10th, 16th, 20th, 32nd, 64th and figured inches
• Metric side subdivided in mm with lines for every 5mm and numbers for every 10
• Opposite edge on Metric side subdivided into 0.5mm increments
• Manufactured in Japan to exacting standards