Sold Out

Tormek KJ-45 Centering Knife Jig and SVM-00 Small Knife Holder

SKU: KJ45SVM00 Category:
Tormek Small Knife Holder + Knife centering Jig

£47.99 inc. VAT

Out of stock

Want to be notified when this product is back in stock?

Get sharp and get even with the Tormek KJ-45 Centering Knife Jig. It works with both Tormek T?4 and Tormek T?8 machines, as well as older models.

Using the KJ-45 you can achieve symmetrical bevels with the same angle on both sides of your knife, regardless of the thickness or geometry of the blade. Whether you’re sharpening a regular kitchen knife or a thick utility knife, you’ll get the same results on both bevels of the knife without needing to reset the jig.

Restore the blade to its original edge angle or choose the angle you prefer. The jig rests freely onto the Universal Support so you can follow the curve of the bladel. The KJ-45 Centering Knife Jig fits most types of knives: household knives, chef’s knives, craft knives and knives for hunting and fishing. It also works for carver’s drawknives and gardener’s pruning shears.

The KJ-45 features an extra stop for tall knives, such as cleavers. You can even put a slightly convex edge on a knife by moving between the two stops.

The KJ-45 takes knives with blades down to 60mm long and 12mm wide. For smaller knives, you can combine the knife jig with the SVM?00 Small Knife Holder, which enables you to sharpen even your very smallest knives.

In common with all Tormek jigs the KJ-45 is robust with zinc?cast clamps and fibreglass?reinforced composite stops.

Key Features

  • Get sharp and get even
  • Fits Tormek T?4 and T?8 machines, and older models
  • Symmetrical bevels with the same angle on both sides
  • Takes most types of knives: chef’s, craft, camping, fishing
  • Adjustable to suit different blade thicknesses
  • Zinc?cast clamps and fibreglass?reinforced composite stops

 

The Small Knife Holder SVM-00 from Tormek opens up the possibility to sharpen those really small knife blades, which up until now have been difficult to sharpen.

Normally small knives have been sharpened free-hand but every time it was a challenge to get a consistent shape and almost impossible to control the edge angle.

The holder works together with the Tormek KJ-45

You can sharpen knives of different shapes for whittling, chip carving and detail work, even folding pocket knives can be sharpened with perfect control.

Since it is the handle of the knife that is mounted in the SVM?00 holder, there is really no limit to how small a blade you can sharpen.

Weight 0.2 kg

Reviews

There are no reviews yet.

Be the first to review “Tormek KJ-45 Centering Knife Jig and SVM-00 Small Knife Holder”
Shopping Basket
Scroll to Top