• display as grid Grid
  • display as list List
Page: First | | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12 |

Record Power 3pc Pen Turning Set
Sold Out
Record Power 3pc Pen Turning Set
RPCHSP3 3 Piece HSS Pen Turning Set This set of chisels are ideal for small projects such as pens. Their compactness makes delicate and fine work easier. The chisels come in an attractive presentation and storage box. Set contains: 3/8” Spindle Gouge 1/8” Parting Tool 1/2” Oval Skew Chisel
£49.99 inc VAT
RECORD POWER 7 PIECE UNIVERSAL BARREL TRIMMING SYSTEM
RECORD POWER 7 PIECE UNIVERSAL BARREL TRIMMING SYSTEM
Can be used either on the lathe, a drill press or hand drill to accurately trim blank length.
£29.99 inc VAT

Record Power PP1 Pen Press
Record Power PP1 Pen Press
PP1 Deluxe Pen Assembly Press Allows precision insertion of pen mechanisms quickly and easily, eliminating risk of breakage.
£54.99 inc VAT

RECORD POWER UNIVERSAL PEN MANDREL KIT (NO.2 M.T.) WITH 7MM DRILL BIT
RECORD POWER UNIVERSAL PEN MANDREL KIT (NO.2 M.T.) WITH 7MM DRILL BIT
This mandrel accepts any size mechanism. A 7mm drill bit is also supplied for boring blanks. Supplied with PBS1 7mm bushes. 2 Morse Taper.
£25.99 inc VAT






Sierra Stylus Twist Pen Gold
Sierra Stylus Twist Pen Gold
The omni directional inductive tip adapts to any writing style. The stylus keeps your touch-screen free of fingerprints and smudges as it gives increased control over any touch-screen operation. It's perfect for sketching, drawing, gaming and photography apps, or any use where you need a finer degree of control than your fingers can offer. It has a very firm touch and great input for tablets and touch...
£9.85 inc VAT



Ultima 7mm Pen Kit (5 pack)
Ultima 7mm Pen Kit (5 pack)
Key Features 7mm Pen Slimline Locking Mechanism 24ct Gold Plated Slimline 7mm Rotur pen - with locking mechanism. Designed to turn on the universal and deluxe pen mandrel. Available in Gold Plated or Satin Chrome.
£14.99 inc VAT

ULTIMA 7MM PEN KIT SATIN CHROME
ULTIMA 7MM PEN KIT SATIN CHROME
Silimline 7mm Rotur pen - with locking mechanism. Designed to turn on the universal and deluxe pen mandrel.
£17.99 inc VAT
Charnwood 2MTS Taper Sleeve 2MT-1MT
New
£5.99 inc VAT

RECORD POWER 5/16" SHELL AUGER
RECORD POWER 5/16" SHELL AUGER
Can be used for boring up to 40" between centres. Requires CWA92 cup centre or supplied together as CWA131 Long Hole Boring Kit.
£19.99 inc VAT
RECORD POWER CWA122 Thread adaptor M33x3.5mm female to 1'x8 tpi male
New
RECORD POWER CWA122 Thread adaptor M33x3.5mm female to 1'x8 tpi male
RECORD POWER CWA122 Thread adaptor M33x3.5mm female to 1"x8 tpi male
£19.99 inc VAT

Record Power Remounting Jaw Fastening Kit
Record Power Remounting Jaw Fastening Kit
This set of spare fastenings is compatible with the Record Power 62356 Remounting Jaws Mini and 62376 Remounting Jaws Mega. It contains 8 standard profile rubber securing buffers and screws along with 8 longer hex socket screws to allow the remounting jaws to be fixed to the chuck beneath another set of jaws.
£9.99 inc VAT

Record Power SC3 & SC4 - Chuck Fastening Kit
Record Power SC3 & SC4 - Chuck Fastening Kit
Standard fastenings spares kit for the Record Power SC3 and SC4 chucks. The kit contains 8 hex socket head screws for jaws, 3 and 4 mm hex wrenches and a blind set screw and fibre washer for chuck inserts.
£4.99 inc VAT
RECORD POWER THREAD PROTECTOR CENTRE EJECT
RECORD POWER THREAD PROTECTOR CENTRE EJECT
This dual purpose accessory comes as standard with the DML36SH-CAM, CL3 and CL4. Ideal for use when turning between centres or when the lathe is not in use, to protect the spindle thread from damage. It is also designed to be used as a centre ejector; unscrewing will release the headstock drive centre.
£14.99 inc VAT

Record Power Universal Spanner For SC4
Record Power Universal Spanner For SC4
Record Power Universal Spanner For SC4
£14.99 inc VAT

Charnwood 1MT / 2MT Revolving Centre
New
Charnwood 1MT / 2MT Revolving Centre
Choose your size above, you will recieve one centre only
£16.99 inc VAT
Charnwood CDC25 Crown Drive Centre For Chucks 25mm diameterCharnwood CDC25 Crown Drive Centre For Chucks 25mm diameter
Charnwood CDC25 Crown Drive Centre For Chucks 25mm diameter
Turn spindles without removing your chuck from the lathe using this chuck drive centre. The sharp point in the centre is spring loaded and retracts as pressure is applied from the tail stock. The ring of 20 sharp teeth then create an extremely powerful grip. Crown diameter 25mm (1")Overall Length 55mm (2")Diameter of Chuck Insert End 19mm (3/4")Width of Jaw Clamping Channel 9mm (3/8") Can...
£27.99 inc VAT

Charnwood Drive Centre
Charnwood Drive Centre
Choose your size 
£16.99 inc VAT
New Charnwood Crown Drive Centre 1mt / 2mtNew Charnwood Crown Drive Centre 1mt / 2mt
New
New Charnwood Crown Drive Centre 1mt / 2mt
New for 2018 Crown Drive Centres 1mt / 2mt
£27.99 inc VAT

New Charnwood Crown revolving Centre 1mt / 2mt
New
New Charnwood Crown revolving Centre 1mt / 2mt
New for 2018 Crown Drive Centres 1mt / 2mt
£32.99 inc VAT
PEN MANDREL SUPPORT CENTRE 1 MT
PEN MANDREL SUPPORT CENTRE 1 MT
The Pen Mandrel Support Centre has been designed and manufactured by PLANET here in the UK as an optimum way of holding and supporting the Pen Mandrel Shaft during the making of pens. This product is much the same as our Standard Rotating Centre (SD1/2), having 2 sealed bearings, a 12mm nose to represent 12mm bushings, is offered in 1MT & 2MT, precisely machined and designed to last and satisfy...
£29.99 inc VAT

PEN MANDRELL SUPPORT CENTRE 2MT
PEN MANDRELL SUPPORT CENTRE 2MT
The Pen Mandrel Support Centre has been designed and manufactured by PLANET here in the UK as an optimum way of holding and supporting the Pen Mandrel Shaft during the making of pens. This product is much the same as our Standard Rotating Centre (SD1/2), having 2 sealed bearings, a 12mm nose to represent 12mm bushings, is offered in 1MT & 2MT, precisely machined and designed to last and satisfy...
£29.99 inc VAT
Planet 0141B Piloted Drive Centre 1' (25.4mm)
Planet 0141B Piloted Drive Centre 1' (25.4mm)
1” diameter 4 prong head. Head relieved behind flutes to prevent binding. Supplied with inter-changeable point, pilot and hex key.
£32.99 inc VAT

Planet 11222 Large Drive Centre 2 Prong 1 1/2' (38.1mm) 2MT
Planet 11222 Large Drive Centre 2 Prong 1 1/2' (38.1mm) 2MT
Suitable for all large types of spindle work.Integral points will not work loose. Removable with extractor ring. 4 prong for squared spindle ends, 2 prong for out of square spindle ends.
£37.99 inc VAT
Planet 11242 Large Drive Centre 4 Prong 1 1/2' (38.1mm) 2MT
Planet 11242 Large Drive Centre 4 Prong 1 1/2' (38.1mm) 2MT
Suitable for all large types of spindle work.Integral points will not work loose. Removable with extractor ring. 4 prong for squared spindle ends, 2 prong for out of square spindle ends.
£39.99 inc VAT

Planet 5161B Hollow Ring Centre 5/8' (15.9mm)
Planet 5161B Hollow Ring Centre 5/8' (15.9mm)
Facilitates the boring of long holes. 5/8” diameter head with 5/16” bore. Supplied complete with removable centre and hex key. May also be used as a tail centre when there is risk of splitting.
£21.99 inc VAT
Planet CR60 Detachable Ring Centre Accessory
Planet CR60 Detachable Ring Centre Accessory
May be placed over the cone of any 60 degree rotating tail centre to convert it to a rotating ring centre. Helps prevent wood splitting due to the pressure of the centre. Overall diameter 20mm.
£9.99 inc VAT

Planet DX1 Deluxe Rotating Centre (60Deg) (12mm) 1MT
Planet DX1 Deluxe Rotating Centre (60Deg) (12mm) 1MT
Slim, Deluxe Rotating Centre. 12mm dia. nose with 60 deg. point. Main body remains stationary while small point turns. Ideal for smaller precision work as well as general spindle turning. Triple bearing design incorporating thrust race. Small rotating cone has been hardened to withstand against wear
£47.99 inc VAT
Planet DX2 Deluxe Rotating Centre (60Deg) (12mm) 2MT
Planet DX2 Deluxe Rotating Centre (60Deg) (12mm) 2MT
Slim, Deluxe Rotating Centre. 12mm dia. nose with 60 deg. point. Main body remains stationary while small point turns. Ideal for smaller precision work as well as general spindle turning. Triple bearing design incorporating thrust race. Small rotating cone has been hardened to withstand against wear
£47.99 inc VAT
Page: First | | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12 |