• display as grid Grid
  • display as list List
Page: First | | 4 | 5 | 6 | 7 | 8 | 9 |

Robert Sorby Steb Drive 7/8'
Robert Sorby Steb Drive 7/8'
The Steb Drive uses the same innovatively designed head as the original Stebcentre. The Steb Drive is designed to fit into the jaws of the majority of 4 jaw woodturning chucks available. It has a positive and secure location utilising the flats of the spigot.
£48.99 inc VAT
VIPERDC 4 Prong Drive Centre for ChucksVIPERDC 4 Prong Drive Centre for Chucks
VIPERDC 4 Prong Drive Centre for Chucks
Turn spindles without removing your chuck from the lathe using this four prong drive centre. The centre point insert is removable and can be replaced by a threaded pin or a blank 8mm diameter pin used for long hole boring which is also supplied. For use with Charnwood W836, W840, Viper 2, Viper 3, Viper 5 & Nexus 3 chucks plus most other makes.
£19.99 inc VAT

12" - 300mm Centre Finder
Sold Out
£9.40 inc VAT
Centre Finder 200mm Capacity
New
£2.64 £1.99 inc VAT

DRAPER Expert 0 - 150mm or 6" Vernier Caliper
DRAPER Expert 0 - 150mm or 6" Vernier Caliper
Expert 0 - 150mm or 6" Vernier Caliper
£37.72 inc VAT
DRAPER Expert Dual Reading Digital Vernier Caliper
DRAPER Expert Dual Reading Digital Vernier Caliper
Expert Dual Reading Digital Vernier Caliper
£63.91 inc VAT

Faithfull Outside Spring Caliper 100mm / 4in
Faithfull Outside Spring Caliper 100mm / 4in
The polished, natural steel finish legs, are made of flat stock and are carefully balanced, with treated points. A strong but flexible bow spring and centrally located adjustment screw give a smooth and precise action. Size 100mm (4 in)
£5.06 inc VAT
Faithfull Outside Spring Caliper 150mm / 6in
Faithfull Outside Spring Caliper 150mm / 6in
The polished, natural steel finish legs, are made of flat stock and are carefully balanced, with treated points. A strong but flexible bow spring and centrally located adjustment screw give a smooth and precise action.
£6.51 inc VAT

Faithfull Outside Spring Caliper 200mm / 8in
Faithfull Outside Spring Caliper 200mm / 8in
The polished, natural steel finish legs, are made of flat stock and are carefully balanced, with treated points. A strong but flexible bow spring and centrally located adjustment screw give a smooth and precise action.
£7.85 inc VAT

Planet CF1 Centre Finder
Best Seller
Planet CF1 Centre Finder
Robust plastic construction. Used to mark the centre of work up to approx 8” diameter. May also be used on square section.
£3.99 inc VAT

Planet Dividers
New
Planet Dividers
Carefully selected range of Rotur Dividers suitable for measuring between two points, scribing circles prior to turning, marking along a spindle, etc. Fine adjustment.
from £7.99 inc VAT
Planet Inside Calipers
New
Planet Inside Calipers
Carefully selected range of Rotur inside calipers suitable for measuring internal dimensions when turning. Fine adjustment.
from £6.99 inc VAT

Planet Outside Calipers
New
Planet Outside Calipers
Carefully selected range of Rotur outside calipers suitable for measuring external dimensions when turning. Fine adjustment.
from £6.99 inc VAT
Planet Turners calipers Set
New
£22.99 inc VAT

Robert Sorby 974 4' Double Ended Callipers
Sold Out
Robert Sorby 974 4' Double Ended Callipers
4" Double ended callipers.
£15.99 inc VAT

Robert Sorby 976 6' Inside / Outside Callipers
Sold Out
Robert Sorby 976 6' Inside / Outside Callipers
6" Inside outside callipers.
£18.99 inc VAT

Robert Sorby 977 7' Double Ended Callipers
Sold Out
Robert Sorby 977 7' Double Ended Callipers
7" Double ended callipers.
£21.99 inc VAT

842G-Excelsior Bowl Gouge HSS 1/4 UNHANDLED
842G-Excelsior Bowl Gouge HSS 1/4 UNHANDLED
842G-Excelsior Bowl Gouge HSS 1/4 Titanium Nitride coated for increased performance and resistance to edge wear. The cutting edge on these tools will outlast our normal tools by a minimum of three fold. Spend less time sharpening and more time turning. Supplied with standard grind.
£38.99 inc VAT
EASY WOOD TOOLS Ci1-R2 CARBIDE CUTTER - 2' Radius
EASY WOOD TOOLS Ci1-R2 CARBIDE CUTTER - 2' Radius
Ci1-R2 CARBIDE CUTTER - 2' Radius Fits: Easy Roughers Full & Pro
£13.99 inc VAT

EASY WOOD TOOLS Ci1-R4 CARBIDE CUTTER - 4'' Radius
EASY WOOD TOOLS Ci1-R4 CARBIDE CUTTER - 4'' Radius
Ci1-R4 CARBIDE CUTTER - 4'' Radius Fits: Easy Roughers Full & Pro
£13.99 inc VAT
EASY WOOD TOOLS Ci2-R2 CARBIDE CUTTER - 2' Radius
EASY WOOD TOOLS Ci2-R2 CARBIDE CUTTER - 2' Radius
Ci2-R2 CARBIDE CUTTER - 2' Radius Fits: Easy Start Rougher, Easy Roughers, Mini & Mid Size
£10.99 inc VAT

EASY WOOD TOOLS Ci2-R2-NR CARBIDE CUTTER - 2' Radius  NEGATIVE RAKE*
EASY WOOD TOOLS Ci2-R2-NR CARBIDE CUTTER - 2' Radius NEGATIVE RAKE*
Ci2-R2-NR CARBIDE CUTTER - 2' Radius NEGATIVE RAKE* Fits: Easy Start Rougher, Easy Roughers, Mini & Mid size
£14.99 inc VAT
EASY WOOD TOOLS Ci2-SQ CARBIDE CUTTER - Square
EASY WOOD TOOLS Ci2-SQ CARBIDE CUTTER - Square
Ci2-SQ CARBIDE CUTTER - Square Fits: Easy Start Rougher, Easy Roughers Mini & Mid Size
£10.99 inc VAT

EASY WOOD TOOLS Ci3 CARBIDE CUTTER - Round
EASY WOOD TOOLS Ci3 CARBIDE CUTTER - Round
Ci3 CARBIDE CUTTER - Round Fits: Easy Start Finishers, Easy finishers mini & midi, Easy Hollowers Full & Pro
£12.99 inc VAT
EASY WOOD TOOLS Ci3-NR CARBIDE CUTTER - Round          NEGATIVE RAKE*
Sold Out
EASY WOOD TOOLS Ci3-NR CARBIDE CUTTER - Round NEGATIVE RAKE*
Ci3-NR CARBIDE CUTTER - Round NEGATIVE RAKE* Fits: Easy Start Finishers, Easy finishers mini & midi, Easy Hollowers Full & Pro
£15.99 inc VAT

EASY WOOD TOOLS Ci4 CARBIDE CUTTER - Diamond
EASY WOOD TOOLS Ci4 CARBIDE CUTTER - Diamond
Ci4 CARBIDE CUTTER - Diamond Fits: Easy Detailers, All except Micro & Mid-size Micro detailer
£14.99 inc VAT
EASY WOOD TOOLS Ci4NR CARBIDE CUTTER - Diamond
EASY WOOD TOOLS Ci4NR CARBIDE CUTTER - Diamond
Ci4 CARBIDE CUTTER Negative rake - Diamond The Special geometry of our negative rake carbide enhance turning. They: Create Smooth, continuous cuts, even in hard-to-turn materials. Are made especially for acrylic, resin and super hard woods like mesquite or ironwood. Greatly reduce chipping and catches Create a beautifully smooth finishing pass on all materials . Reduce sanding time. Make...
£16.99 inc VAT

EASY WOOD TOOLS Ci5 CARBIDE CUTTER - Round
EASY WOOD TOOLS Ci5 CARBIDE CUTTER - Round
Ci5 CARBIDE CUTTER - Round Fits: Micro Finisher, Mid Size Easy hollowers
£12.99 inc VAT
EASY WOOD TOOLS Ci5-NR CARBIDE CUTTER NEGATIVE RAKE
EASY WOOD TOOLS Ci5-NR CARBIDE CUTTER NEGATIVE RAKE
Ci5-NR CARBIDE CUTTER NEGATIVE RAKE* Fits: Micro Finisher, Mid Size Easy hollowers
£15.99 inc VAT

EASY WOOD TOOLS Ci6-R1 CARBIDE CUTTER - 1' Radius
EASY WOOD TOOLS Ci6-R1 CARBIDE CUTTER - 1' Radius
Ci6-R1 CARBIDE CUTTER - 1' Radius Fits: Easy Micro Rougher
£13.99 inc VAT
EASY WOOD TOOLS Ci6-R1 CARBIDE CUTTER - 1' Radius Negative Rake
EASY WOOD TOOLS Ci6-R1 CARBIDE CUTTER - 1' Radius Negative Rake
Ci6-R1 CARBIDE CUTTER - 1' Radius Negative Rake Fits: Easy Micro Rougher
£14.99 inc VAT

EASY WOOD TOOLS Ci6-SQ CARBIDE CUTTER - Square
EASY WOOD TOOLS Ci6-SQ CARBIDE CUTTER - Square
Ci6-SQ CARBIDE CUTTER - Square Fits: Easy Micro Rougher
£13.99 inc VAT
EASY WOOD TOOLS Ci7 CARBIDE CUTTER - Diamond
EASY WOOD TOOLS Ci7 CARBIDE CUTTER - Diamond
Ci7 CARBIDE CUTTER - Diamond Fits: Easy Micro Detailer & Mid-size Micro Detailer
£17.99 inc VAT

EASY WOOD TOOLS Ci7-NR CARBIDE CUTTER - Diamond
EASY WOOD TOOLS Ci7-NR CARBIDE CUTTER - Diamond
Ci7NR Negative Rake CARBIDE CUTTER - Diamond The Special geometry of our negative rake carbide enhance turning. They: Create Smooth, continuous cuts, even in hard-to-turn materials. Are made especially for acrylic, resin and super hard woods like mesquite or ironwood. Greatly reduce chipping and catches Create a beautifully smooth finishing pass on all materials . Reduce sanding time. Make...
£17.99 inc VAT
EASY WOOD TOOLS EASY FULL-SIZE 3-PIECE WOODTURNING TOOLS
EASY WOOD TOOLS EASY FULL-SIZE 3-PIECE WOODTURNING TOOLS
This awesome set of Full-Size Easy Wood Tools for Wood Turning comes with all three tools (Rougher, Finisher & Detailer) and can be used to complete almost any project you set your mind to. These are made 100% in America & EWT only utilizes the highest quality materials available. The Easy Rougher is a carbide cutter woodturning tool that addresses fatigue, safety, and efficiency like no other...
£339.99 inc VAT

EASY WOOD TOOLS Easy MICRO 3-Piece Set
Easy MICRO 3-Piece Set Includes FREE 1' Radius Ci6-RI Carbide Cutter and Sturdy Tool Case The introduction of the Easy Micro Turning Tools brings a whole new level of creativity and capabilities to carbide turning. Precision feel and the ability to achieve finer detailing bring more control when turning small, detailed projects. Turning ornaments and finials has never been more satisfying and...
£219.99 £179.99 inc VAT
EASY WOOD TOOLS EASY PRO 3-PIECE WOODTURNING TOOLS SET
EASY WOOD TOOLS EASY PRO 3-PIECE WOODTURNING TOOLS SET
This awesome set of Pro Easy Wood Tools for Wood Turning comes with all three tools (Rougher, Finisher & Detailer) and can be used to complete almost any project you set your mind to. These are made 100% in America & EWT only utilizes the highest quality materials available. The Easy Rougher is a carbide cutter woodturning tool that addresses fatigue, safety, and efficiency like no other type...
£360.99 inc VAT

EASY WOOD TOOLS EASY START FINISHER
EASY WOOD TOOLS EASY START FINISHER
EASY START FINISHER FOR GENERAL SHAPING AND INSIDE CURVES 9' Hard Maple Handle Overall Length 12.5' Replacement Cutter Option: Ci3-NR
£54.99 inc VAT
EASY WOOD TOOLS EASY START ROUGHER
EASY WOOD TOOLS EASY START ROUGHER
EASY START ROUGHER for heavy cuts and outside curves Hard Maple Handle overall length 12.5' Replacement Cutter Option: Ci2-R2 and Ci2-R2-NR
£49.99 inc VAT

EASY WOOD TOOLS FULL-SIZE EASY DETAILER
EASY WOOD TOOLS FULL-SIZE EASY DETAILER
FULL-SIZE EASY DETAILER Easy Detailer The Easy Detailer tools really pick up where other tools leave off and provide another level of woodturning creativity as the unique diamond cutter shape fits in tight places where the cutters on the other tools will just not fit. These tools were designed for the primary purpose of doing the small intricate work and cutting final details on your projects...
£117.49 inc VAT
EASY WOOD TOOLS MID-SIZE EASY FINISHER
EASY WOOD TOOLS MID-SIZE EASY FINISHER
MID-SIZE EASY FINISHER With another step forward in woodturning innovation, Easy Wood Tools now offers you a tool to take up where the Easy Rougher leaves off. The Easy Finisher has a round carbide cutter perfect for doing the inside work on smaller bowls and for larger coves on spindle work. Our carbide inserts are made in the USA and we are pleased to offer you a tool that is 100% 'made in America.' ...
£99.99 inc VAT

EASY WOOD TOOLS PRO EASY ROUGHER
EASY WOOD TOOLS PRO EASY ROUGHER
PRO EASY ROUGHER The Easy Rougher is a carbide cutter woodturning tool that addresses fatigue, safety, and efficiency like no other type of tool on the market. Designed to be kept flat on the tool rest and level to the floor, the Easy Rougher will effortlessly hog away massive amounts of material for any woodturning process without the need for sharpening. The tool design provides support directly...
£126.49 inc VAT
Robert Sorby 370A Modular Micro Spiral Tool, 5 1/2' (140mm) Aluminium Handle
Sold Out
Robert Sorby 370A Modular Micro Spiral Tool, 5 1/2' (140mm) Aluminium Handle
Aluminium handle Spiralling head Two micro spiral cutters (fine and medium) Two Allen keys With surface decoration and small intricate work being ever more popular this new Spiralling tool covers all options. Like the existing Robert Sorby Spiralling System, this tool incorporates a tool rest to ensure the correct angle is maintained when producing fine delicate spirals. The...
£58.99 inc VAT
Page: First | | 4 | 5 | 6 | 7 | 8 | 9 |