• display as grid Grid
  • display as list List
Page: First | | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | | Last

Robert Sorby A86HS3T Modular Micro Pen Turning Set
Robert Sorby A86HS3T Modular Micro Pen Turning Set
888 Handle 888/1 Micro ½" (13mm) Roughing Gouge 888/2 Micro ½" (13mm) Spindle Master 888/3 Micro 1/16" (2mm) Parting Tool
£54.99 inc VAT
Rockler 13-1/2' Ergonomic Carbide Mini Turning Tool Set 3pce
Rockler 13-1/2' Ergonomic Carbide Mini Turning Tool Set 3pce
13-1/2' Ergonomic Carbide Mini Turning Tool Set
£169.99 inc VAT

Wood Turning Chisel Set 8pce
Wood Turning Chisel Set 8pce
£24.34 £16.99 inc VAT
Robert Sorby Turnmaster Tip Holder For Sharpening
Robert Sorby Turnmaster Tip Holder For Sharpening
No more ground finger ends, just bolt your tips to aid with sharpening.
£6.99 inc VAT


TurnMaster Excelsior box / dovetail cutter
TurnMaster Excelsior box / dovetail cutter
Titanium Nitride (TiN) Plasma Bonded Coating box / dovetail cutter. TiN is bonded onto quality HSS. It provides the same advantages as HSS whilst enhancing the cutting life close to that of tungsten carbide. Use the same traditional sharpening equipment used for HSS. Sharpens to 0.12-0.2 microns. Harness of coating up to 85RC. Material is Titanium Nitride on M2 HSS. Better used for parrallel side walls,...
£11.99 inc VAT
TurnMaster Excelsior detail point cutter
TurnMaster Excelsior detail point cutter
Titanium Nitride (TiN) Plasma Bonded Coating detail point cutter. TiN is bonded onto quality HSS. It provides the same advantages as HSS whilst enhancing the cutting life close to that of tungsten carbide. Use the same traditional sharpening equipment used for HSS. Sharpens to 0.12-0.2 microns. Harness of coating up to 85RC. Material is Titanium Nitride on M2 HSS. Better used forline detailing and...
£11.99 inc VAT

TurnMaster Excelsior French curve / inside cutter
TurnMaster Excelsior French curve / inside cutter
Titanium Nitride (TiN) Plasma Bonded Coating french curve inside cutter. TiN is bonded onto quality HSS. It provides the same advantages as HSS whilst enhancing the cutting life close to that of tungsten carbide. Use the same traditional sharpening equipment used for HSS. Sharpens to 0.12-0.2 microns. Harness of coating up to 85RC. Material is Titanium Nitride on M2 HSS. Better used for internal shaping...
£11.99 inc VAT
TurnMaster Excelsior Mushroom Cutter
TurnMaster Excelsior Mushroom Cutter
Titanium Nitride (TiN) Plasma Bonded Coating mushroom cutter. TiN is bonded onto quality HSS. It provides the same advantages as HSS whilst enhancing the cutting life close to that of tungsten carbide. Use the same traditional sharpening equipment used for HSS. Sharpens to 0.12-0.2 microns. Harness of coating up to 85RC. Material is Titanium Nitride on M2 HSS. Better used for undercutting small hollow...
£11.99 inc VAT

TurnMaster Excelsior round cutter
TurnMaster Excelsior round cutter
Titanium Nitride (TiN) Plasma Bonded Coating round cutter. TiN is bonded onto quality HSS. It provides the same advantages as HSS whilst enhancing the cutting life close to that of tungsten carbide. Use the same traditional sharpening equipment used for HSS. Sharpens to 0.12-0.2 microns. Harness of coating up to 85RC. Material is Titanium Nitride on M2 HSS. Better used for internal waste removal, shaping...
£11.99 inc VAT

TurnMaster Excelsior teardrop / inside cutter
TurnMaster Excelsior teardrop / inside cutter
Titanium Nitride (TiN) Plasma Bonded Coating teardrop inside / outside cutter. TiN is bonded onto quality HSS. It provides the same advantages as HSS whilst enhancing the cutting life close to that of tungsten carbide. Use the same traditional sharpening equipment used for HSS. Sharpens to 0.12-0.2 microns. Harness of coating up to 85RC. Material is Titanium Nitride on M2 HSS. Perfect for scraping...
£11.99 inc VAT
TurnMaster handled with detail point tungsten carbide cutter
TurnMaster handled with detail point tungsten carbide cutter
The concept: "We started by wanting to offer a tool that supports our vision for woodturners. It had to be flexible and it had to offer quick and easily achievable results. It also had to enlighten turners to the various materials available and what can be expected from them. We wanted to develop a tool that introduces people to woodturning while at the same time providing a quick and simple solution...
£76.99 inc VAT

TurnMaster handled with Hss Cutters1,2 and 3
New
TurnMaster handled with Hss Cutters1,2 and 3
The concept: "We started by wanting to offer a tool that supports our vision for woodturners. It had to be flexible and it had to offer quick and easily achievable results. It also had to enlighten turners to the various materials available and what can be expected from them. We wanted to develop a tool that introduces people to woodturning while at the same time providing a quick and simple solution...
£96.99 inc VAT
TurnMaster handled with round tungsten carbide cutter
TurnMaster handled with round tungsten carbide cutter
The concept: "We started by wanting to offer a tool that supports our vision for woodturners. It had to be flexible and it had to offer quick and easily achievable results. It also had to enlighten turners to the various materials available and what can be expected from them. We wanted to develop a tool that introduces people to woodturning while at the same time providing a quick and simple solution...
£76.99 inc VAT

TurnMaster handled with square tungsten carbide cutter
TurnMaster handled with square tungsten carbide cutter
The concept: "We started by wanting to offer a tool that supports our vision for woodturners. It had to be flexible and it had to offer quick and easily achievable results. It also had to enlighten turners to the various materials available and what can be expected from them. We wanted to develop a tool that introduces people to woodturning while at the same time providing a quick and simple solution...
£76.99 inc VAT
TurnMaster head only
TurnMaster head only
The concept: "We started by wanting to offer a tool that supports our vision for woodturners. It had to be flexible and it had to offer quick and easily achievable results. It also had to enlighten turners to the various materials available and what can be expected from them. We wanted to develop a tool that introduces people to woodturning while at the same time providing a quick and simple solution...
£18.99 inc VAT

TurnMaster HSS box / dovetail cutter
TurnMaster HSS box / dovetail cutter
High speed steel box / dovetail cutter. This super fine grain structure will provide a razor sharp edge. The result is a superior finish to your turning projects and less need for sanding. Can easily be sharpened on traditional sharpening machines such as the Robert Sorby ProEdge or bench grinders. Sharpens to 0.2 - 0.4 microns. Hardness 62RC. Material M2 HSS. Better used for parallel side walls. Perfect...
£8.99 inc VAT
TurnMaster HSS Detail point cutter
TurnMaster HSS Detail point cutter
High speed steel detail point cutter. This super fine grain structure will provide a razor sharp edge. The result is a superior finish to your turning projects and less need for sanding. Can easily be sharpened on traditional sharpening machines such as the Robert Sorby ProEdge or bench grinders. Sharpens to 0.2 - 0.4 microns. Hardness 62RC. Material M2 HSS. Better used for line detailing and finishing.
£8.99 inc VAT

TurnMaster HSS French curve/inside cutter
TurnMaster HSS French curve/inside cutter
High speed steel french curver inside cutter. This super fine grain structure will provide a razor sharp edge. The result is a superior finish to your turning projects and less need for sanding. Can easily be sharpened on traditional sharpening machines such as the Robert Sorby ProEdge or bench grinders. Sharpens to 0.2 - 0.4 microns. Hardness 62RC. Material M2 HSS. Better used for internal shaping...
£8.99 inc VAT
TurnMaster HSS mushroom cutter
TurnMaster HSS mushroom cutter
High speed steel mushroom cutter. This super fine grain structure will provide a razor sharp edge. The result is a superior finish to your turning projects and less need for sanding. Can easily be sharpened on traditional sharpening machines such as the Robert Sorby ProEdge or bench grinders. Sharpens to 0.2 - 0.4 microns. Hardness 62RC. Material M2 HSS. Better used for undercutting small hollow forms.
£8.99 inc VAT

TurnMaster HSS round cutter
TurnMaster HSS round cutter
High speed steel round cutter. This super fine grain structure will provide a razor sharp edge. The result is a superior finish to your turning projects and less need for sanding. Can easily be sharpened on traditional sharpening machines such as the Robert Sorby ProEdge or bench grinders. Sharpens to 0.2 - 0.4 microns. Hardness 62RC. Material M2 HSS. Better used for internal waste removal, shaping...
£8.99 inc VAT
TurnMaster HSS square cutter
TurnMaster HSS square cutter
High speed steel square cutter. This super fine grain structure will provide a razor sharp edge. The result is a superior finish to your turning projects and less need for sanding. Can easily be sharpened on traditional sharpening machines such as the Robert Sorby ProEdge or bench grinders. Sharpens to 0.2 - 0.4 microns. Hardness 62RC. Material M2 HSS. Better used for external waste removal, straight...
£8.99 inc VAT

TurnMaster HSS teardrop / outside cutter
TurnMaster HSS teardrop / outside cutter
High speed steel teardrop cutter. This super fine grain structure will provide a razor sharp edge. The result is a superior finish to your turning projects and less need for sanding. Can easily be sharpened on traditional sharpening machines such as the Robert Sorby ProEdge or bench grinders. Sharpens to 0.2 - 0.4 microns. Hardness 62RC. Material M2 HSS. Perfect for scraping / shear scraping inside...
£8.99 inc VAT
TurnMaster shank with detail point tungsten carbide cutter
TurnMaster shank with detail point tungsten carbide cutter
The concept: "We started by wanting to offer a tool that supports our vision for woodturners. It had to be flexible and it had to offer quick and easily achievable results. It also had to enlighten turners to the various materials available and what can be expected from them. We wanted to develop a tool that introduces people to woodturning while at the same time providing a quick and simple solution...
£69.99 inc VAT

TurnMaster shank with round tungsten carbide cutter
TurnMaster shank with round tungsten carbide cutter
The concept: "We started by wanting to offer a tool that supports our vision for woodturners. It had to be flexible and it had to offer quick and easily achievable results. It also had to enlighten turners to the various materials available and what can be expected from them. We wanted to develop a tool that introduces people to woodturning while at the same time providing a quick and simple solution...
£69.99 inc VAT
TurnMaster shank with square tungsten carbide cutter
TurnMaster shank with square tungsten carbide cutter
The concept: "We started by wanting to offer a tool that supports our vision for woodturners. It had to be flexible and it had to offer quick and easily achievable results. It also had to enlighten turners to the various materials available and what can be expected from them. We wanted to develop a tool that introduces people to woodturning while at the same time providing a quick and simple solution...
£69.99 inc VAT

TurnMaster tungsten carbide detail point cutter
TurnMaster tungsten carbide detail point cutter
Tungsten Carbide square cutter. Tungsten Carbide makes light work of tough materials and is an extremely hard wearing and long lasting material. Although designed as a throwaway item it can be sharpenied on specialist equipment such as the Robert Sorby ProEdge system with a Diamond Belt. Sharpens to 0.7 microns. Hardness is 90RC. Material is micro grade tungsten carbide. Better used for initial external...
£12.99 inc VAT
TurnMaster tungsten carbide square cutter
TurnMaster tungsten carbide square cutter
Tungsten Carbide detail point cutter. Tungsten Carbide makes light work of tough materials and is an extremely hard wearing and long lasting material. Although designed as a throwaway item it can be sharpenied on specialist equipment such as the Robert Sorby ProEdge system with a Diamond Belt. Sharpens to 0.7 microns. Hardness is 90RC. Material is micro grade tungsten carbide. Better used for line...
£12.99 inc VAT

Robert Sorby 310H Texturing Tool (inc 350/0), 12' (305mm) Handle
Robert Sorby 310H Texturing Tool (inc 350/0), 12' (305mm) Handle
This is a remarkable adaptation of an engineer's knurling tool. It consists of a handle, blade and a double bevelled texturing cutter with integral bearing. It can be used to create unique effects that alter the tactile and visual qualities of your bowls, hollow forms, goblets or boxes perfect for adding that individual mark to your work. Orange peel, striated and ribbed patterns are possible using...
£62.99 inc VAT
Robert Sorby 320H Spiralling Tool, 12' (305mm) Handle
Robert Sorby 320H Spiralling Tool, 12' (305mm) Handle
Adding such decorations as spirals to turned pieces was once the domain of the privileged. Now you can venture into this field and create spirals to your hearts content. The Robert Sorby Spiralling System is a further development on the texturing tool and is used to create both left and right handed spirals with ease. It features an innovative rest with indexed reference positions, which enable...
£87.99 inc VAT

Robert Sorby 330H Spiralling System (inc 350/0, 350/2, 350/4, 350/6, 360), 12' (305mm) Handle
Robert Sorby 330H Spiralling System (inc 350/0, 350/2, 350/4, 350/6, 360), 12' (305mm) Handle
The Spiralling System is a tool unique to Robert Sorby. It is designed to provide decorative spirals on turned work - round the rims of bowls, round, the stems of goblets and candle-sticks. It will not cut threads.\nSpirals can be cut at different angles, left or right and in different sizes. Such is the variety. It is possible to cut one spiral over another to produce cross hatches, diamonds and rope...
£144.99 inc VAT
Robert Sorby 350/0  Texturing Cutter, for 310H, 320H, 330H
£29.99 inc VAT



Robert Sorby 370/0 Modular Micro Spiral Tool, Unhandled
Robert Sorby 370/0 Modular Micro Spiral Tool, Unhandled
With surface decoration and small intricate work being ever more popular this new Spiralling tool covers all options. This is for the tool unhandled only. To see the full tool with handle click here
£43.99 inc VAT

Robert Sorby 370/01 Fine Spiral Cutter, for Modular Micro Spiral Tool
Robert Sorby 370/01 Fine Spiral Cutter, for Modular Micro Spiral Tool
Spare cutter for Sorby 370 Modular system. This is the fine spiral cutter.
£10.99 inc VAT
Robert Sorby 370/02 Medium Spiral Cutter, for Modular Micro Spiral Tool
Robert Sorby 370/02 Medium Spiral Cutter, for Modular Micro Spiral Tool
Spare cutter for Sorby 370 Modular system. This is the medium spiral cutter.
£10.99 inc VAT

Robert Sorby 370/03 Texturing Cutter, for Modular Micro Spiral Tool
Robert Sorby 370/03 Texturing Cutter, for Modular Micro Spiral Tool
Spare cutter for Sorby 370 Modular system. This is the texture cutter.
£10.99 inc VAT
EASY WOOD TOOLS M33 - 3.5  EASY CHUCKEASY WOOD TOOLS M33 - 3.5  EASY CHUCK
EASY WOOD TOOLS M33 - 3.5 EASY CHUCK
M33 - 3.5 EASY CHUCK 4' Woodturning Chuck M33 Thread Size 30 Second Jaw Changes Top Jaws Snap-In No Screws! The Easy Chuck is the easiest to use, 4-jaw chuck on the market, period. With our Snap-Lock-Technology (SLT), jaws can easily be changed out in a matter of seconds. No screws to loose, no numbering of the jaws and Easy Wood Tools offers...
£368.49 inc VAT

Longworth Style Chuck
New
Longworth Style Chuck
Re-chucking bowls and patters for finishing or light shaping has always been something woodturners want to solve. The longworth style chuck makes it easy. This self-centering scroll operation quickly adjusts to fit the work and tightening only takes a few seconds. Designed for clamping in a traditiona 4 jaw-self-centering chuck using standard 50mm dovetail jaws. It eliminates the time and hasse of...
from £99.00 inc VAT
RECORD POWER 2 1/2" WOODSCREW CHUCK  - 3/4" x 16 TPI
RECORD POWER 2 1/2" WOODSCREW CHUCK - 3/4" x 16 TPI
This features two extra screw holes adjacent to the centre screw, allowing greater hold so it can be used as a faceplate; ideal for work that is too small for a standard faceplate. For even greater hold, the standard supplied number 14 1 1/4” woodscrew can be replaced with a longer alternative. - 3/4" x 16 TPI
£22.99 inc VAT

Record Power Chuck SC3 PackageRecord Power Chuck SC3 Package
Sale
Record Power Chuck SC3 Package
Record Power Woodworking Chuck SC3-3 Jaw Chuck Package Deal 1x8, 3/4 x 16 TPI M33x3.5 RH
£109.99 £99.99 inc VAT
Page: First | | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | | Last