• display as grid Grid
  • display as list List
Page: 1 | 2 |

Drill Press Hold Down
New
Drill Press Hold Down
Drill Press Hold Down. For use on a Drill Press or on a Work Bench.
from £7.99 inc VAT
Elipse P3 Half Mask Respirator
Elipse P3 Half Mask Respirator
Elipse P3 Half Mask Respirator
£21.99 inc VAT

Famag Boremax 2.0 Forstner Bit, Alloyed Tool Steel - Imperial Sizes
New
Famag Boremax 2.0 Forstner Bit, Alloyed Tool Steel - Imperial Sizes
These are the professionals choice in forstner bits. Perhaps looking more like a saw tooth bit than a convensional forstner bit, the Bormax bits are specially designed to give a perfect, clean cut quickly and accurately. The special waveform design gives the side of the bit a lower surface area reducing friction considerably which, in turn, reduces the amount of power used to drive the bit. This lower...
from £24.99 inc VAT
Famag Disc and plug cutter 12  mm
Famag Disc and plug cutter 12 mm
Disc and plug cutter 12 mm
£66.99 inc VAT

Fisco 52ME Combination Square 12in 30cm
Fisco 52ME Combination Square 12in 30cm
Standard multi-purpose square for use as an outside and inside try square, mitre square, depth and marking gauge. The lightweight zinc stock is matt black and is fitted with a scriber. The blade is stainless steel with ground edges and ends, marked in millimetres and inches. Size: 300mm / 12 inch.
£11.80 inc VAT
JSP Powercap Active IP Powered Respirator Impact ProtectionJSP Powercap Active IP Powered Respirator Impact Protection
New
JSP Powercap Active IP Powered Respirator Impact Protection
JSP PowerCap® Active™ IP TH1P | CAE601-941-100 Powered Air Respiratory protection to EN12941:1988 TH1P. Assigned Protection Factor 10 (UK classification) equivalent to an EN149 FFP2. Mask gives a cooling, comfortable supply of filtered air at 160 litres per minute eliminating breathing resistance and visor misting. Bump Cap Head Protection The cap uses JSP Hardcap A1+™ bump cap...
£229.99 £219.99 (VAT exempt)

Kreg 90° Corner Clamp with AutomaxxKreg 90° Corner Clamp with Automaxx
Kreg 90° Corner Clamp with Automaxx
Self-squaring design aligns joints to 90° angle when compressed. Includes L-handle for quick release. Swivel head adjusts to thicknesses up to 32mm (1-1/4'). Heat-treated, steel clamping surface with nickel plating protects soft woods against workpiece imprint.
£32.99 inc VAT
Kreg Hardware Installation SUPER DELUXE Package Deal 4 Jigs + 2 FREE CLAMPS!
New
£119.98 £99.99 inc VAT

Pozi Screwdriver Impact Bit 3pk PZ2 110mmPozi Screwdriver Impact Bit 3pk PZ2 110mm
Pozi Screwdriver Impact Bit 3pk PZ2 110mm
Pozi Screwdriver Impact Bit 3pk
£3.99 inc VAT
Pozi Screwdriver Impact Bit 3pk PZ2 25mmPozi Screwdriver Impact Bit 3pk PZ2 25mm
Pozi Screwdriver Impact Bit 3pk PZ2 25mm
Pozi Screwdriver Impact Bit 3pk
£1.99 inc VAT

Rockler Silicone Project Mat 57666
Silicone Project Mat
£29.99 £24.99 inc VAT
Router Table Box Joint Jig 10-3/4'' x 11-1/2''
£69.99 inc VAT

Yandles essentials Sonis 1 Ear Defenders SNR27 80-107 dB Made in EnglandYandles essentials Sonis 1 Ear Defenders SNR27 80-107 dB Made in England
New
£17.99 inc VAT
Yandles Honing / Polishing Compound Bars Fine & Medium 500gYandles Honing / Polishing Compound Bars Fine & Medium 500g
from £5.99 inc VAT

150mm or 6" Carbon Fibre Digital Caliper Gauge
150mm or 6" Carbon Fibre Digital Caliper Gauge
£26.18 £9.99 inc VAT
Bahco Ergo Handsaw System Handle Only Left Hand Large Grip
Bahco ERGO™ Handsaw System Handle is the most advanced and comfortable handle ever. Mix and match with a range of interchangeable Bahco superior blades.This truly flexible system combines maximum versatility with superior sawing performance. You simply purchase the blade you require and retain the professionally engineered handle.Left-handed handle is available in one size only.Features:- Asymmetrical...
£26.52 £19.99 inc VAT

Bahco Ergo Handsaw System Handle Only Right Hand Large Grip
Bahco ERGO™ Handsaw System Handle is the most advanced and comfortable handle ever. Mix and match with a range of interchangeable Bahco superior blades. This truly flexible system combines maximum versatility with superior sawing performance. You simply purchase the blade you require and retain the professionally engineered handle. Left-handed handle is available in one size only. Features:...
£26.52 £19.99 inc VAT
Igaging Digital 3 in 1 GaugeIgaging Digital 3 in 1 Gauge
New
Igaging Digital 3 in 1 Gauge
Set the heights of router bits and saw blades with greater accuracy! This 3-in-1 digital router combines the functions of three tools: a depth gauge, height gauge and thickness gauge. It is a metal rule with a Super Large LCD display, housed in a heavy-duty polycarbonate frame which allows it to stand freely. The frame allows the tool to be set at 70, 80 or 90 degrees as well as horizontally for accurate...
£20.99 inc VAT

Narex Set of carving chisels START in leather tool roll
suitable for beginners blades from hardened carbon steel, sharpened edge beech handles chisels stored in a leather tool roll
£59.99 £49.99 inc VAT
Narex Set of dovetail chisels, WOOD LINE PLUS 1/4"-1/2"-3/4Narex Set of dovetail chisels, WOOD LINE PLUS 1/4"-1/2"-3/4
Narex Set of dovetail chisels, WOOD LINE PLUS 1/4"-1/2"-3/4
New from Narex, a very well presented set of 3 dovetail chisels, for creating and cleaning out dovetails, which includes the new 1/4″ size The set contains: Sizes 1/4″ 813507 1/2″ 813513 3/4″ 813519 Blade – forged from highly alloyed Cr-Mn steel heat treated up to 59 HRc Handle – stained beech wood, varnished
£79.99 inc VAT

NEW FOR 2020 Bessey UK100 UniKlamp 1000 x 80
New
NEW FOR 2020 Bessey UK100 UniKlamp 1000 x 80
• Clamping force up to 1,500 N • Parallel jaw faces with extra-large contact surfaces • Clamping of various shapes, along the whole length of the rail • Universally applicable • Light and easy-to-handle • No need for tools for switching between clamping and spreading • On carded hang pack Parallel jaw faces, The large, flat jaw faces made from impact- and fracture-resistant...
£24.99 inc VAT
NEW FOR 2020 Bessey UK80 UniKlamp 800 x 40
New
NEW FOR 2020 Bessey UK80 UniKlamp 800 x 40
• Clamping force up to 1,500 N • Parallel jaw faces with extra-large contact surfaces • Clamping of various shapes, along the whole length of the rail • Universally applicable • Light and easy-to-handle • No need for tools for switching between clamping and spreading • On carded hang pack Parallel jaw faces, The large, flat jaw faces made from impact- and fracture-resistant...
£22.99 inc VAT

Precision Wood Carving Set 12pce 200mmPrecision Wood Carving Set 12pce 200mm
New
Precision Wood Carving Set 12pce 200mm
Precision Wood Carving Set 12pce
£19.06 £14.99 inc VAT

Rockler Silicone Glue Kit 3pce 57691Rockler Silicone Glue Kit 3pce 57691
Rockler Silicone Glue Kit 3pce 57691
Silicone Glue Kit 3pce
£12.99 inc VAT
Roughneck One Handed Turbo Clamp 15cm / 6in
Best Seller
Roughneck One Handed Turbo Clamp 15cm / 6in
The Roughneck One Handed Turbo Clamp is suitable for one-handed operation and is ideal for clamping work pieces in the home, workshop or in industry. This clamp operates in the same way as a mastic gun by using the lever and has an instant single handed release. Comes with plastic pad for protecting the work piece being clamped. Gripping capacity: 150mm (6in).
£9.30 £7.99 inc VAT

Stubai Drawknife
New
Stubai Drawknife
Stubai are one of Europes premier manufacturers of fine edge tools for woodworkers. These drawknives are hand forged from high carbon steel then hardened and tempered to hold a fine edge. The Stubai drawknife is a mid-size tool which is useful for general woodworking applications such as timber and log work and furniture making, handles are slightly offset from the blade. The cutting edge is 9 1/4”...
£32.99 inc VAT
Triton Wood Chisel Set 3pce
New
Triton Wood Chisel Set 3pce
High-quality, hardened chrome vanadium steel blade for superior performance and edge retention. Nickel-plated steel striking cap for strength and durability. Large striking cap withstands repetitive mallet blows from any angle. Ergonomic, 2-tone, soft-grip handles for toughness and durability whilst maintaining user comfort. Precision-ground blade for maximum sharpness straight out of the box and can...
£17.99 inc VAT

VERITAS LOW ANGLE BLOCK PLANE + PM-V11 Blade
VERITAS LOW ANGLE BLOCK PLANE + PM-V11 Blade
The Veritas Low Angle Block Plane stands apart from many others. Its 12° bed angle and low cutting angle of 37° excel at working end grain. It has higher side wings ideal for shooting, finger grips in each side for better control, and a combined blade advance and lateral adjust that is the most sensitive and accurate available. Two blade guide screws prevent blade shifting. Its compact 162mm long...
£139.99 inc VAT
VERITAS LOW ANGLE JACK PLANE + PM-V11 BladeVERITAS LOW ANGLE JACK PLANE + PM-V11 Blade
VERITAS LOW ANGLE JACK PLANE + PM-V11 Blade
The Low Angle Jack Plane is ideal for shooting mitres, working end grain and initial smoothing. Veritas have designated it as a 62 1/2 because of its generous size, greater weight, low centre of gravity and radically set-back mouth. Measuring 380mm(15") long and 57mm(2.1/4") wide, it weighs just under 2.72kg(6lb.). With sides machined square to the sole, a specially shaped lever cap and machined thumb...
£236.99 inc VAT

VERITAS MICRO-ADJUST WHEEL MARKING GAUGEVERITAS MICRO-ADJUST WHEEL MARKING GAUGE
VERITAS MICRO-ADJUST WHEEL MARKING GAUGE
Fine adjustment mechanism with a range of 6mm Large reference surface for square registration Aluminium body with brass face, stainless steel rod Hardened steel wheel cutter Cutter position allows use as a depth gauge Overall length 170mm
£38.99 inc VAT
Yandles essentials Bowl Sander Sanding Tool Kit + Sanding DiscsYandles essentials Bowl Sander Sanding Tool Kit + Sanding Discs
New
Yandles essentials Bowl Sander Sanding Tool Kit + Sanding Discs
2” self-aligning bowl sander With velcro pad Adjustable angle head Dual ball bearings for smooth operation Ideal for sanding bowls on the lathe Kit includes: Wooden Handle 50mm Velcro Head (2") Sanding Discs PLUS Get x40 Extra Sanding Discs FREE! When selecting the 'x40 Extra Mixed Sanding Discs' option above
£38.99 inc VAT

Charnwood BD48 - 4” x 8” Belt & Disc SanderCharnwood BD48 - 4” x 8” Belt & Disc Sander
New
Charnwood BD48 - 4” x 8” Belt & Disc Sander
This combination belt & disc sander is actually a 2 in 1 machine as it also features a built in dust collector. 500w Quiet Induction Motor 8" Diameter Sanding Disc 4" x 36" Sanding Belt Vertical or Horizontal Use 2 Tilting Work Tables With Mitre Guide Powered Dust Collection Fan Dust Collection Bag This heavy duty bench top sander has a cast iron base with extended legs for increased stability....
£179.99 inc VAT
Charnwood BD610 - 6” x 10” Belt & Disc SanderCharnwood BD610 - 6” x 10” Belt & Disc Sander
New
Charnwood BD610 - 6” x 10” Belt & Disc Sander
A heavy duty workshop sander, with the traditional combination of belt and disc, driven via belt by a quiet 1hp induction motor.The large diameter disc is fitted with a sturdy aluminium table which is secured on both sides. Radiused guides allow the table to tilt to 45 degrees and be accurately locked at any angle. The table also has a T slot for the mitre guide, which is adjustable to 60 degrees each...
£269.99 inc VAT

Charnwood SS16F - 16” Variable Speed Scrollsaw with Foot PedalCharnwood SS16F - 16” Variable Speed Scrollsaw with Foot Pedal
Charnwood SS16F - 16” Variable Speed Scrollsaw with Foot Pedal
The complete scroll saw package, with a powerful DC motor allowing electronic variable speed control and a foot pedal switch to allow the operator to keep both hands on the work piece at all times. Perfect for hobby, craft and model making. Electronic Variable Speed 16" Throat Capacity Use Both Pin and Plain Ended Blades Integral Plain Blade Setting Jig LED Work light on Flexible Shaft Foot Pedal Control...
£119.99 inc VAT
DRAPER 210mm 1500W 230V Sliding Compound Mitre Saw with Laser Cutting Guide
210mm 1500W 230V Sliding Compound Mitre Saw with Laser Cutting Guide
£166.01 £129.99 inc VAT

£159.26 £119.99 inc VAT
Laguna C Flux 1 Cyclone Dust Extractor with Fine Filter
New
Laguna C Flux 1 Cyclone Dust Extractor with Fine Filter
With this highly acclaimed second generation of Cyclones, Laguna have set a new standard in terms of separation, airflow and quality of components.With remote control as standard, this is an ideal Cylonic extractor for either dedicated single machine use or as part of a small ducting system in your workshop.
£1,399.99 inc VAT

Record Power Coronet Herald Heavy Duty Cast Iron Electronic Variable Speed LatheRecord Power Coronet Herald Heavy Duty Cast Iron Electronic Variable Speed Lathe
Free Delivery!
Record Power Coronet Herald Heavy Duty Cast Iron Electronic Variable Speed Lathe
Record Power Heavy Duty Cast Iron Coronet Herald Heavy Duty Cast Iron
£999.95 inc VAT
Record Power SABRE350 Premium 14" BandsawRecord Power SABRE350 Premium 14" Bandsaw
Free Delivery!
Record Power SABRE350 Premium 14" Bandsaw
Record Power SABRE 350 Premium 14" Bandsaw
£999.95 inc VAT

Robert Sorby ProEdge Plus Deluxe Special Edition Package DealRobert Sorby ProEdge Plus Deluxe Special Edition Package Deal
Special Offer
Robert Sorby ProEdge Plus Deluxe Special Edition Package Deal
Robert Sorby ProEdge Plus Deluxe System Ultimate Package Deal SAVE OVER £25!
£411.99 £389.99 inc VAT
Startrite TS1 Table Saw, 900mm Rip, 1200mm Sliding Table with Squaring Frame
Startrite TS1 Table Saw, 900mm Rip, 1200mm Sliding Table with Squaring Frame
Startrite TS1 Table Saw With 900mm Rip & Squaring frame
£3,239.99 inc VAT

13mm Mini Belt Sander (400W)
New
13mm Mini Belt Sander (400W)
13mm Mini Belt Sander (400W)
£75.52 £53.99 inc VAT
D20 20V Brushless 1/4" Impact Driver with 2 x 2Ah Batteries and Charger (180Nm)
D20 20V Brushless 1/4" Impact Driver with 2 x 2Ah Batteries and Charger (180Nm)
£181.05 £114.99 inc VAT

D20 20V Tri-Base (Detail) Sander with 2Ah Battery and Charger
D20 20V Tri-Base (Detail) Sander with 2Ah Battery and Charger
£88.86 £56.99 inc VAT
Mirka DEROS 5650CV Deco Solution Kit
Sale
£419.99 £414.99 inc VAT

Razertip SS-D10 Burner, Pyrography Starter Kit
Razertip SS-D10 Burner, Pyrography Starter Kit
Razertip SS-D10 Burner, Pyrography Starter Kit
£221.99 inc VAT
Storm Force 10.8V Mini Polisher - Bare
Storm Force® 10.8V Mini Polisher - Bare
£46.55 £29.99 inc VAT
Page: 1 | 2 |