Super Sale

Super Sale

  • display as grid Grid
  • display as list List
Page: 1 | 2 | 3 |

180W Rotary Multi Tool Kit (111 Piece)
Best Buy
180W Rotary Multi Tool Kit (111 Piece)
180W Rotary Multi Tool Kit (111 Piece)
£49.99 £44.99 inc VAT
5 Piece Lip & Spur Wood Drillbit Set Faithfull
The Faithfull set of 5 lip and spur wood bits. The preferred cutting tip design for drilling wood, these alloy steel drills have a steeper twist and a deeper flute than HSS bits, for rapid clearance of waste. They are ideal for use in dowelling jigs. Sizes: 4, 5, 6, 8 and 10mm. Diameter: 4mm. Working Length: 43mm. Overall Length: 75mm.Diameter: 5mm. Working Length: 50mm. Overall Length: 85mm.Diameter:...
£13.99 £5.99 inc VAT

ADVBE15025 Black Edition Tape 5m/16ft (Width 25mm)
Black Edition Tape 5m/16ft (Width 25mm)
£16.99 £12.99 inc VAT
ADVBE18025 Black Edition Tape 8m/26ft (Width 25mm)
Black Edition Tape 8m/26ft (Width 25mm)
£21.99 £16.99 inc VAT

African Blackwood Exotic Pen Blanks Pack of 5
Stunning African Blackwood Hardwood Exotic Pen Blanks Supplied as a pack of 5 Size roughly 3/4" x 3/4" x 6" Long (smallest size, may be bigger) Cut from a single board, grain pattern will vary
£12.99 £6.99 inc VAT
Cascamite One Shot Structural Wood Adhesive Tub - Choose your size
Cascamite One Shot Structural Wood Adhesive Tub - Choose your size
cascamite is specially formulated for exterior joinery exposed to the weather. The powder system enables extremely good gap filling properties ensuring water does not enter the joint and produces the strongest bond. It attains bond strength very fast, enabling it to be used for load bearing and laminating. Use internally and externally where high bond strength/gap filling/water resistance is required. Ideal...
£5.99 from £2.99 inc VAT

Charnwood 1/2" CBN CBNA1/2 Adaptor For use with BG6 Grinder & CBN Wheel
Sale
Charnwood 1/2" CBN CBNA1/2 Adaptor For use with BG6 Grinder & CBN Wheel
Charnwood 1/2" CBN CBNA1/2 Adaptor For use with BG6 Grinder & CBN Wheel
£24.99 £22.99 inc VAT
Charnwood 1/2" CBN CBNW1/2 Washer For use with BG6 Grinder & CBN Wheel / Adaptor
Sale
Charnwood 1/2" CBN CBNW1/2 Washer For use with BG6 Grinder & CBN Wheel / Adaptor
Charnwood 1/2" CBN CBNW1/2 Washer For use with BG6 Grinder & CBN Wheel / Adaptor
£11.99 £10.99 inc VAT

Charnwood 10" Heavy Duty Planer Thicknesser with Spiral / Helical Blade Cutter BlockCharnwood 10" Heavy Duty Planer Thicknesser with Spiral / Helical Blade Cutter Block
Sale
Charnwood 10" Heavy Duty Planer Thicknesser with Spiral / Helical Blade Cutter Block
 Heavy Duty Planer Thicknesser with Spiral Blade Cutter Block + 5 EXTRA CUTTERS!
£1,849.00 from £1,749.00 inc VAT
Charnwood BD15 - 1” x 5” Belt & Disc Sander
A compact and well made combination disc & belt sander. Ideally suited to any small workshop and an excellent choice for model makers, toy makers, or anybody working with small components. 1" Wide Belt Sander Tilting Work Table with Back Plate 2" Diameter Drum for Curved Sanding 5" Diameter Sanding Disc Tilting Work Table With Mitre Fence 2 Dust Collection Outlets A cast iron base gives this mini...
£89.99 from £79.99 inc VAT

Charnwood Cubic Boron Nitride CBN Grinding Wheel 6" / 150mm x 40mm x 32mm Bore  B91 CBN6B91Charnwood Cubic Boron Nitride CBN Grinding Wheel 6" / 150mm x 40mm x 32mm Bore  B91 CBN6B91
Sale
Charnwood Cubic Boron Nitride CBN Grinding Wheel 6" / 150mm x 40mm x 32mm Bore B91 CBN6B91
6” (150mm) CBN Wheel CBN6B91 150mm x 40mm x 32mm Bore CBN is an abbreviation for Cubic Boron Nitride. It is an abrasive material. Cubic boron nitride is the second-hardest known material after diamond, making it useful in a wide variety of industrial applications. Recommended Speed: Optimum speed for 6” (150mm) diameter wheel is 1700 to 3000 rpm. Bore Size: The bore is 32mm diameter....
£139.99 £129.99 inc VAT
Charnwood High Filtration Vacuum Extractor DC50
Sale
Charnwood High Filtration Vacuum Extractor DC50
Charnwood DC50 Dust Extractor
£109.99 from £99.99 inc VAT

Charnwood ML28 28 LED Flexible Worklight with Magnetic Base
Sale
Charnwood ML28 28 LED Flexible Worklight with Magnetic Base
With 28 LED bulbs mains powered, our magnetic base light is ideal for any situation where better lighting is required. The flexible arm is 370mm long and is fixed onto a magnetic base that can be turned on and off allowing the LED light to be securely attached to any steel or cast iron base. With 28 LED lights it produces better light than many with the added advantage of emitting very little heat. There...
£29.99 £27.99 inc VAT
Charnwood PT200 8'' x 5'' Bench Top DIY Planer ThicknesserCharnwood PT200 8'' x 5'' Bench Top DIY Planer Thicknesser
Sale
Charnwood PT200 8'' x 5'' Bench Top DIY Planer Thicknesser
Charnwood 8'' x 5'' Bench Top Planer Thicknesser
£299.99 from £279.99 inc VAT

Charnwood PT250 10'' x 5'' Bench Top DIY Planer ThicknesserCharnwood PT250 10'' x 5'' Bench Top DIY Planer Thicknesser
Sale
Charnwood PT250 10'' x 5'' Bench Top DIY Planer Thicknesser
PT250 10'' x 5'' Bench Top DIY Planer Thicknesser
£369.99 from £349.99 inc VAT
Charnwood Tungsten Carbide Tipped (TCT) Table Saw Blade 300mm x 30mm Bore Laser Cut SK5 Steel 3.2KCharnwood Tungsten Carbide Tipped (TCT) Table Saw Blade 300mm x 30mm Bore Laser Cut SK5 Steel 3.2K
New lower price
Charnwood Tungsten Carbide Tipped (TCT) Table Saw Blade 300mm x 30mm Bore Laser Cut SK5 Steel 3.2K
Tungsten Carbide Tipped (TCT) circular saw blade for table saws and bench saws. High-quality precision blade for professional users packed with the latest technology. Laser Cut Plate - Premium Quality SK5 Steel Resin Filled Laser Cut Slots - Noise Reduction Black Electro Plated Finish - Protects from Corrosion Tungsten Carbide Tipped - 24 Teeth Tri-Metal Brazing - Shock resistant Alternative Top Bevel...
£22.99 from £19.99 inc VAT

Cobalt HSS Drill Set M35 1-10mm 19 Piece
Cobalt HSS Drill Set M35 1-10mm 19 Piece
£78.99 £31.99 inc VAT
Cobalt Quick-Change Impact Drill Bit Set, 5 Piece, HSSE M35
Faithfull Cobalt Quick-Change Impact Drill Bits feature a revolutionary tip design that is far superior to any other drill bit in the industry. These innovative drill bits have 7 cutting edges and 3 peaks that offer several distinct competitive advantages:- Super-accurate self-centring - you can make a hole in a round-pipe with one hand.- Speed - twice as fast as split point drill bits.- Tool lifetime...
£17.99 £8.99 inc VAT

Crown Carbide Pro Full Set of 3 Tipped Turning Tools
Sold Out
Crown Carbide Pro Full Set of 3 Tipped Turning Tools
Crown Carbide Pro Hollowing Tip Turning Tools - SET OF 3!
Crown Mini Carbide Pro Full Set of 3 Tipped Turning Tools
Sale
Crown Mini Carbide Pro Full Set of 3 Tipped Turning Tools
Crown Mini Carbide Pro Tip Turning Tool
£139.99 £129.99 inc VAT

£149.99 £129.99 inc VAT
Double-Stitched Buffing Wheel 150mm
Double-Stitched Buffing Wheel
£7.99 £3.99 inc VAT

£18.99 £12.99 inc VAT
Everbuild Fine Surface Filler Ready Mixed 600g Tub - White
New
Everbuild Fine Surface Filler Ready Mixed 600g Tub - White
This EVERBUILD Fine Surface Filler is an easy-to-use ready mixed filler for small holes and surface imperfections in most porous surfaces such as plaster, and wood. The ready mixed filler dries to a smooth finish, which can be painted or papered.The multipurpose white filler's uses include minor indoor or outdoor repairs to plaster, plasterboard, brick, render, wood, stone, and most other building...
£6.99 £4.99 inc VAT

Faithfull 4 Piece Chisel Set in Roll
Faithfull 4 Piece Chisel Set in Roll
£54.99 £23.99 inc VAT
Faithfull Diamond Sharpening Stone
Faithfull Diamond Sharpening Stone
£74.99 £29.99 inc VAT

Framers Corner PFK03 Picture Frame Assembly Kit
Frame assembly kit which can be used to assemble any mitred, 4 sided frame. Included in the kit: NEW metal mitre clamp for accurate tight mitres Magnetic tipped v-nail driver (use your own hammer) NEW spirit level for levelling frames on the wall 165 piece hardware kit for finishing & hanging the frame The heart of this kit is the mitre clamp, which has been upgrade for 2010 to...
£12.99 £10.99 inc VAT
Framers Corner PFK04 Deluxe Picture Frame Assembly Kit
Sale
Framers Corner PFK04 Deluxe Picture Frame Assembly Kit
The latest addition to our range of picture framing tools allowing the hobby framer or artist to be able to join professional looking frames at home. The frame clamp has a quick action mechanism to quickly and securely hold the two mitred pieces of moulding. Once clamped, the corner is turned upside down and positioned on the non-slip base and up against the fence for accurate location of the wedge....
£69.99 £64.99 inc VAT

Fretsaw/Scrollsaw Blade Clamp Holder Set(2 Piece)
Fretsaw Blade Clamp Holder Set (2 Piece) for pinless blades
£6.99 £4.99 inc VAT
HD Polycarbonate Digital 3 in 1 Depth Gauge with LCD Display for Router Tables / Table SawsHD Polycarbonate Digital 3 in 1 Depth Gauge with LCD Display for Router Tables / Table Saws
Sale
HD Polycarbonate Digital 3 in 1 Depth Gauge with LCD Display for Router Tables / Table Saws
Set the heights of router bits and saw blades with greater accuracy! This 3-in-1 digital router combines the functions of three tools: a depth gauge, height gauge and thickness gauge. It is a metal rule with a Super Large LCD display, housed in a heavy-duty polycarbonate frame which allows it to stand freely. The frame allows the tool to be set at 70, 80 or 90 degrees as well as horizontally for accurate...
£21.99 £19.99 inc VAT

HiKOKI Angle Grinder 115mm + FREE Diamond Blade 600W / 240V G12STXHiKOKI Angle Grinder 115mm + FREE Diamond Blade 600W / 240V G12STX
Special Offer
£49.99 £39.99 inc VAT
HSS Drill Set M2 1 - 10mm Faithfull
HSS Drill Bit Set of 10 M2 1 - 10mm
£33.99 £17.99 inc VAT

Irwin 880 UN Universal Hand Saw 550mm (22in) Coated 8tpi
880 UN Universal Hand Saw 550mm (22in) Coated 8tpi
£29.99 £9.99 inc VAT
Irwin Folding Sawhorse (Twin Pack) All Metal Saw Stand 816kg MAX LOAD! IRW183474
The IRWIN® All Metal Sawhorse takes inspiration from the woodworking heritage of the brand. With the ability to screw a sacrificial wood top directly to the sawhorse and easy horizontal and vertical clamping, this really is a product for those who like versatility. It also features a 2x4 groove for timber supports. Fitted with ergonomic quick-release handles, non-marring rubber feet and a patented...
£154.99 £94.99 inc VAT

Irwin Straight-Line Carpenter's Pencil - Single
Special Offer
£0.99 inc VAT
Irwin Universal Toolbox Wood Jack Saw 350mm (14in) 8tpi 880UN
880UN Universal Toolbox Saw 350mm (14in) 8tpi
£14.99 £9.99 inc VAT

£38.99 £33.45 inc VAT
Kreg 76mm / 3' Classic Face Clamp
Sale
Kreg 76mm / 3' Classic Face Clamp
This Classic Face Clamp offers increased reach and clamping capacity. Features a 3' reach and clamps materials up to 23/4' thick. Classic Face Clamps are designed for creating perfectly flush Kreg Joints, and they work great for lots of other shop and project tasks that require solid clamping without marring. These clamps feature large clamp pads that distribute clamping force evenly, and hold pieces...
£25.99 £23.50 inc VAT

Kreg Bench Clamp with Bench Clamp Base
By combining a 3' Bench Clamp with a Bench Clamp Base, this kit allows you to take the power, versatility, and convenience of a Kreg Bench Clamp almost anywhere. The Bench Clamp Base (also available separately) is made from durable cast aluminum. It can be mounted quickly and easily to any work surface that’s equipped with 3/4' or 20mm bench dog holes. Or, you can simply drill a hole in any...
£65.99 £58.99 inc VAT
Kreg Blue-Kote Pocket-Hole Screw Kit
This kit contains four of our most popular weather-resistant screws for Kreg Joinery in a durable, easy-to-carry case. It’s a great starter kit for anyone new to Kreg Joinery, who wants to build outdoor projects. Weather-resistant screws for Kreg Joinery Secured in a durable, easy-to-carry case Perfect for building outdoor projects
£35.99 £31.25 inc VAT

Kreg Corner Router Guide Set for Routers and Router Tables PRS1000-INT
Get accurate and repeatable results with this simple to use routing guide. Works with any router, includes 8 profiles (5 Radius sizes and 3 Chamfer sizes), adjustable edge stops and our exclusive Grip-Maxx® Anti-Slip base.
£47.99 £40.99 inc VAT
Kreg Insert Plate Undrilled PRS4038
Kreg Insert Plate Undrilled
£78.99 £67.50 inc VAT

Kreg Pocket-Hole Jig 720 KPHJ720
Sale
Kreg Pocket-Hole Jig 720 KPHJ720
The Pocket-Hole Jig 720 is the most advanced jig yet from Kreg® with features designed for efficient project building like one-motion Automaxx™ clamping and automatic material thickness setting for material from 13 mm (½”) to 38 mm (1 ½”).
£111.00 £108.99 inc VAT
Kreg Pocket-Hole Jig XLKreg Pocket-Hole Jig XL
Sale
Kreg Pocket-Hole Jig XL
Build big and build strong projects from 2×4 or 4×4 boards with pocket hole joints that have twice strength. Works with new 4″ and 2½” XL Pocket-Hole Screws, and the XL Drill Bit.
£52.45 £49.99 inc VAT

Kreg Precision Bandsaw Fence
Kreg Precision Bandsaw Fence A New Level of Band Saw Accuracy  
£131.99 £117.00 inc VAT
Kreg Precision Router Table Setup Bars - Set of 7
Exclusive 3-gauge design makes them perfect for many applications Concave step on bottom of each bar allows for precise height adjustment Step on top of each bar acts as gauge to test depth of completed cuts Step on end of each bar can set distance from tablesaw blade to fence, or router bit to fence Bars are made from soft aluminum to prevent router bit and saw blade damage
£67.99 £56.75 inc VAT

Kreg Right Angle Clamp with Automaxx KHCRA-INTKreg Right Angle Clamp with Automaxx KHCRA-INT
Sale
Kreg Right Angle Clamp with Automaxx KHCRA-INT
Right Angle Clamp Holds pocket-hole joints at 90° during project assembly
£38.99 £35.50 inc VAT
Kreg Shelf Pin JigKreg Shelf Pin Jig
Sale
Kreg Shelf Pin Jig
Add perfectly spaced shelf pin holes to existing furniture, or build custom shelves from scratch, with the Shelf Pin Jig.
£39.99 from £36.50 inc VAT
Page: 1 | 2 | 3 |