Grid
List
Kreg Precision Router Table Top
1' thick (25mm) MDF core with steel reinforcing struts
Durable Easy-Slide™ low-friction surface
Heavy-duty 3/8' x 91/4' x 113/4' (9mm x 235mm x 298mm) insert plate
Level-Loc reducing rings: 1', 13/16', 25/8' (25mm, 30mm, 66mm) and ring wrench
(4) Kreg Precision Insert Plate Levelers
Anodized Combo Trak miter-gauge/T-slot track
Kreg Router Bit 1/4' Standard Bead Cutter
1/4' (6mm) Standard Beading Bit for creating 1/4' deep beading profiles
Comes with Kreg® Beaded Face-Frame System
Works with 1/4' x 11/2' Notching Bit (PRS4200) and 1/4' x 2' Notching Bit (PRS4205)
Kreg Router Bit 1/4' x 2' Notch Cutter
1/4' (6mm) Notching Bit for creating 1/4'-deep notches for 1/4' beading profiles
Works with the 1/4” Standard Beading Bit (PRS4250)
One-pass operation for cutting a notch for 2'-wide (50mm) rails
Kreg Router Bit 3/8' Standard Bead Cutter
3/8' (9mm) Standard Beading Bit
Creates 3/8'-deep beading profiles
Works with Kreg® 3/8' Notching Bits (PRS4210 and PRS4215)
Kreg Router Bit 3/8' x 1-1/2' Notch Cutter
3/8' (9mm) Notching Bit
For creating 3/8'-deep notches for 5/16' and 3/8' beading profiles
One-pass operation for cutting a notch for 11/2'-wide (38mm) rails
Kreg Router Bit 3/8' x 2' Notch Cutter
3/8' (9mm) Notching Bit
For creating 3/8'-deep notches for all 5/16' and 3/8' beading profiles
One-pass operation for cutting a notch for 2'-wide (50mm) rails
Kreg Router Bit 5/16' Standard Bead Cutter
5/16' (8mm) Standard Beading Bit
For creating 3/8'-deep, stepped beading profiles
Works with Kreg® 3/8' Notching Bits (PRS4210 and PRS4215)
Kreg Shelf Pin Jig
Add perfectly spaced shelf pin holes to existing furniture, or build custom shelves from scratch, with the Shelf Pin Jig.
Kreg Shelf Pins
Use these 5mm Shelf Pins to add adjustable shelves to your project. Compatible with the Kreg Shelf Pin Jig with 5mm Drill Bit. Includes 20 Shelf Pins.
Kreg Straight Edge Guide 1219mm (4 ft.)
Make perfectly straight cuts up to 1219mm (4 feet) in sheet goods with guided cuttingCut sheet goods down to size with precision and ease by using the Kreg® Straight Edge Guide. Work with material up to 1219mm (4 feet) and get the cuts you need – whether you’re using a circular saw, jigsaw, or trim router. (Works with most brands.) Guided cutting makes it easier than ever to see exactly...
Kreg Straight Edge Guide Extension 610mm (2 ft.)
Expand the cutting capacity of your Straight Edge Guide Add extra 610mm (2') of guide rail to your Kreg® Straight Edge Guide in minutes. With this extension, you can make even longer cuts in sheet goods while using a circular saw, jigsaw, or trim router.
Kreg Straight Edge Guide XL 2438mm (8 ft.)
Make perfectly straight cuts up to 2438mm (8 feet) in sheet goods with guided cuttingCut full sheets of plywood down to size with precision and ease by using the Kreg® Straight Edge Guide XL. Work with material up to 8 feet and get the cuts you need – whether you’re using a circular saw, jigsaw, or trim router. (Works with most brands.) Guided cutting makes it easier than ever to see...
Kreg Trak Clamp
Track Clamps make perfect companions to the Accu-Cut Circular Saw Guide Track System. These easy-to-use clamps lock into place on the underside of the Accu-Cut track and Starting Block to offer additional holding power when needed—such as when working with slick-surfaced sheet goods such as melamine-coated particleboard, or when cutting with a single length of track.
Track Clamps are also compatible...
Kreg True-FLEX Featherboard - Single
Carefully designed fingers apply optimum pressure
Wedge-Lock™ hardware for miter slot and T-slot compatibility
Durable plastic composite body
Kreg True-FLEX Featherboard - Twin Pack
Carefully designed fingers apply optimum pressure
Wedge-Lock™ hardware for miter slot and T-slot compatibility
Durable plastic composite body
Micro Drill Bit with Guide DB210-MBB
Micro Drill Bit with Guide
Dowel Drill Stops 1 x 6 8 & 10mm
Dowel Drill Stops 1 x 6 8 & 10mm
Dowel Kit 6mm Drill & Points
Dowel Kit 6mm Drill & Points
Faithfull Centre Points - Accurate alignment of dowel holes.
Centre Points 4 x 8mm