• display as grid Grid
  • display as list List

Planet Bench Stop
New
Planet Bench Stop
Mounts flush into any bench with minimum thickness of 22mm. Toothed plate is raised by thumbscrew to provide ‘stop’ against which work may be laid whilst planing, etc. Overall size 62 x 38mm.
£9.99 inc VAT
Planet Needle Rasp Set
Planet Needle Rasp Set
Pack of six handled riffler rasps. Ideal for pattern making, carving, fitting, etc. Approx 150mm long.
£8.99 inc VAT

Rffler Wrapper set
New
Rffler Wrapper set
Set of eight 6" long heavier duty rasps for that less intricate work. Comes in red velvet roll.
£23.99 inc VAT
Hand Held Drive Punch 1' 4 prong
Hand Held Drive Punch 1' 4 prong
Use this unique tool to position your work to save your drive centers from being damaged with a hammer or mallet.
£16.99 inc VAT

HSS Countersink set 4 piece in metal case
New
HSS Countersink set 4 piece in metal case
A smooth cutting chatter-free high speed steel countersink, for use in natural timber and composite board. Central flute clears the waste, even when the countersink is used at maximum diameter. Resharpenable with a diamond file
£31.99 inc VAT
Planet Cabinet Scraper 4' x 2'
Planet Cabinet Scraper 4' x 2'
Manufactured in Sheffield from flexible, high quality steel, and polished to give a smooth finish. They have a good edge retention and are re-sharpenable
£3.99 inc VAT

Planet Cabinet Scraper 5' x 2 1/2'
New
Planet Cabinet Scraper 5' x 2 1/2'
Manufactured in Sheffield from flexible, high quality steel, and polished to give a smooth finish. They have a good edge retention and are re-sharpenable
£4.99 inc VAT
Planet Cabinet scraper set
New
Planet Cabinet scraper set
Manufactured in Sheffield from flexible,high quality steel, and polished to give a smooth finish. They have a good edge retention and are re-sharpenable Set includes: rectangle, concave/convex, kidney.
£12.99 inc VAT

Planet No. 5 Jack Plane
New
Planet No. 5 Jack Plane
250mm 60mm These planes are suitable for rapid stock removal when preparing timber prior to finish. Machined frog and cutter seating are to eliminate blade chatter. Best wooden handle and a special cap iron with hardened carbon chrome steel cutter.
£35.99 inc VAT
Marking Gauge 150mm
New
Marking Gauge 150mm
Mark perfect joints every time. The extra sharp replaceable cutter is hardened and marks a keen accurate line, preventing grain tear out during material removal. Up to 150mm depth of adjustment. Lightweight aluminum body with bright brass standard face. Engraved inch measurements on precision ground shaft.
£33.99 inc VAT

Planet Depth Gauge 6 Inches
New
Planet Depth Gauge 6 Inches
Traditional design. Full 6” / 150mm depth check. Etched and filled rule.
£9.99 inc VAT
Planet Marking Gauge Rosewood
New
Planet Marking Gauge Rosewood
The marking gauge is made of selected rosewood with a protective lacquered finish, fitted with a brass knurled screw for more robust use. The gauge will mark with or across the grain.
£14.99 inc VAT

Planet Mitre Square
New
Planet Mitre Square
This Mitre Square has spring steel blade secured to a double brass faced rosewood stock with four brass rivets. The tool is used for the accurate marking of mitre joints at 45 degrees or 135 degrees.
£17.99 inc VAT
Planet Mortice Gauge Rosewood
New
Planet Mortice Gauge Rosewood
Mortice gauge performs two operations. One side of its posts has a single pin for general marking with the grain or on end grain; its other side has double pins adjustable to approximately 50mm for layout of mortices. Made with solid brass hardware, wear plates, and fitted with milled thumb screw in head. Overall length 200mm.
£17.99 inc VAT

Planet Protractor
Planet Protractor
Stainless steel protractor with high quality, clear, black graduations. Incorporates a 6” / 150mm rule. Degrees are marked from both ends of the scale.
£9.50 inc VAT
Planet Steel Square
New
Planet Steel Square
Conforms to BS939. Suitable for general workshop use.
from £4.99 inc VAT

Planet Try Square
New
Planet Try Square
Try square stock is made from best quality rosewood, spring steel blade & double brass facings. The blade is securely held by three brass rivets. Try squares are available in two sizes and can be used as external & internal square.
from £12.99 inc VAT
Planet Universal grinding gauge
Planet Universal grinding gauge
Assists in the regrinding of hand tools, drill bits, etc. Angles include: 90 degree int, 90 degree ext, 55 degree int, 60 degree int, 60 degree ext and 120 degree int. Made from stainless steel with clear, etched and inked graduations
£3.99 inc VAT

Vernier Depth Gauge 8"
New
Vernier Depth Gauge 8"
This new depth guage has been designed for Planet with metirc and imperial measurements along the heavy duty rule and is tightened in place by a knurled thumbscrew through the body. Comes in a neat wooden box
£24.99 inc VAT