Grid
List
Nova Woodturning Spares Cole Jaw Fastening Kit for Nova Remounting Jaws
These are the fastenings that come standard with all of the Cole Jaw Sets. Useful kit to have on hand for when you’re missing fastenings.
Contains 2 different designs in each kit - a 4-sided buffer and a long pin buffer. Package only.
Standard Equipment:
8 x Rubber Bumpers
8 x Cheese Head Screws
8 x M6 Screws
Plywood Bell, Suitable for Pyrography
A wooden Bell pyrography blank. Perfect for Christmas.
Plywood Christmas Angel, Suitable for Pyrography
A wooden Angel pyrography blank. Perfect for Christmas.
Plywood Christmas Bauble, Suitable for Pyrography
A wooden Bauble pyrography blank. Perfect for Christmas.
Plywood Christmas Stocking, Suitable for Pyrography
A wooden stocking pyrography blank. Perfect for Christmas.
Plywood Christmas Tree Blank Suitable for Pyrography
Decorate your own wooden Christmas tree!
Plywood Santa Head, Suitable for Pyrography
A Santa Head pyrography blank. Perfect for Christmas.
Plywood Snowman, Suitable for Pyrography
A snowman pyrography blank perfect for Christmas.
Precision Screwdriver Set (32 Piece)
Precision Screwdriver Set (32 Piece)
Record Power 2 Inch Faceplate Ring (50mm)
Buy with confidence - Record Power Price Guarantee!
Record Power Angle Finder for WetStone Wg200 / Wg250 Machines
Buy with confidence - Record Power Price Guarantee!
Record Power Angle Setting Gauge for WetStone Wg200 / Wg250 Machines
Buy with confidence - Record Power Price Guarantee!
Record Power Axe Jig for WetStone Wg200 / Wg250 Machines
Buy with confidence - Record Power Price Guarantee!
Record Power Protective Machine Cover for WetStone Wg200 / Wg250 Machines
Buy with confidence - Record Power Price Guarantee!
Record Power RP Plastic Soft Jaws
Buy with confidence - Record Power Price Guarantee!
Record Power Short Tool Jig for WetStone Wg200 / Wg250 Machines
Buy with confidence - Record Power Price Guarantee!
Rib Fruited Mallee Burr / Burl Hardwood Pen Blanks Pack of 5
Stunning Rib Fruited Mallee Burrs
Hardwood
Exotic Pen Blanks
Supplied as a pack of 5
Size roughly 3/4" x 3/4" x 6" Long (smallest size, may be bigger)
Cut from a single board, grain pattern will vary
Kin dried with low moisture contend
Roughneck 37.5cm (15in) Ultimate Bar
Roughneck 37.5cm (15in) Ultimate Bar
Scan Security Key Safe
Scan Security Key Safe
Scan Work Socks (Twin Pack)
Scan Work Socks (Twin Pack)
Screwdriver Set (9 Piece)
Screwdriver Set (9 Piece)
Socket Set, 1/4" Square Drive (27 Piece)
Socket Set, 1/4" Sq. Dr. (27 Piece)
Spear & Jackson Eclipse 42 inch 1060mm Sash clamp ESC42
Steel bodied sash clamps for clamping wide boards together
Spear & Jackson Traditional Wooden Handle Skew Back Handsaw 22 x 10ppi 9500R
A general purpose saw for use along and across the grain
Stanley 10 Piece Cushion Grip Screwdriver Set in Wallet
Stanley 10 Piece Cushion Grip Screwdriver Set in Wallet
Stanley 1912 Combination Square 300mm (12in)
1912 Combination Square 300mm (12in)
Stanley 567g (20oz) Fibreglass Hammer
Stanley 567g (20oz) Fibreglass Hammer
Stanley 5m (16ft) Hi-Vis Tylon Tape Measure
Stanley 5m (16ft) Hi-Vis Tylon Tape Measure
Stanley 99E Trimming Knife Twin Pack with 50 Spare Blades in Organiser
Stanley 99E Trimming Knife Twin Pack with 50 Spare Blades in Organiser
Stanley Dust Mask Respirator With P3 Fitted Filters and Face-Fit-Check Medium/Large Size
Stanley P3 R Half Mask Respirator M/L
Star Ornament Kit
Star Ornament Kit
Top Hat Ornament Kit
Top Hat Ornament
Tormek SVM-45 Short Knife Sharpening Jig - Fits T4 / T8
Get sharp and get even with the Tormek KJ-45 Centring Knife Jig. It works with both Tormek T-4 and Tormek T-8 machines, as well as older models.Using the KJ-45 you can achieve symmetrical bevels with the same angle on both sides of your knife, regardless of the thickness or geometry of the blade. Whether you're sharpening a regular kitchen knife or a thick utility knife, you'll get the same results...
Trend 3-Inch Fine Diamond Mini Tapered File for Woodworking, Gardening & Domestic Tooling, DWS/TF3M/
TAPERED FILE MINI 3 INCH FINE
VERITAS Jointer & Edger
Dual purpose
Topping off teeth prior to re-sharpening
Provides an accurate guide for filing edges of cabinet scrapers
45° guide face for sharpening scraper and plane blades
VERITAS marking gauge - micro-adjust metric
Hardened steel wheel cutter
Cuts wood fibres, rather than tears
Marks cleanly, even on cross grain
The wheel retracts into the face of the gauge for storage and protection
The gauges are very easy to set
Use as a depth gauge to transfer measurements
Veritas Microcrystalline Tool Wax 125ml
This is the same wax formula as our Conservator's Wax, so if you already have a tin of that, you don't need this. Applied sparingly and polished to a sheen, the light, clear microcrystalline wax creates a barrier that inhibits corrosion and protects against moisture, airborne pollutants and finger marks.
At the same time, it will gently remove grime and wax build-up. When used on a plane sole, machine...
Wood Carving Set 12pce Precision 200mm
Precision Wood Carving Set 12pce
Wood Carving Started Set with Sharpening Stone (7 Piece) Steel Blades Hardened & Tempered with Ramin
Wood Carving Set with Sharpening Stone (7 Piece)
Wood Turning Chisel Set 8pce
Wood Turning Chisel Set 8pce
XM23INSPECT 600 LUMENS INSPECTION LAMP
600 LUMENS RECHARGEABLE INSPECTION LAMP
Yandles.co.uk ONLINE ONLY Email Gift Vouchers - FOR ONLINE USE ONLY
Online Gift Vouchers - Email
Zona Soft-Grip Craft Knife Set includes 5 blades
Light-duty knife with anti-roll design
2 Drawer Tool Chest / Tool Box with Ball Bearing Runners & EVA Foam Liners Includes Secure Locking S
2 Drawer Tool Chest/Tool Box
230V Random Orbit Sander, 125mm, 450W
230V Random Orbit Sander, 125mm, 450W
Asahi 375g Japanese Octagonal Gennou Hammer
Probably the most popular of all the Japanese style hammers the octagonal Gennou is a true all-rounder capable of driving nails, striking chisels and setting wooden planes. The silver octagonal heads are very nicely finished and fitted with a high-quality Japanese oak handle.As with all professional Japanese hammers, one face of the hammers head is ground flat and the opposing face is ground to a...