• display as grid Grid
  • display as list List
Page: First | | 58 | 59 | 60 | 61 | 62 |

Robert Sorby 804CO5 Rim Cutter, fits 803H, 804H and 805HRobert Sorby 804CO5 Rim Cutter, fits 803H, 804H and 805H
Robert Sorby 804CO5 Rim Cutter, fits 803H, 804H and 805H
Robert Sorby Rim Cutter, fits 803H, 804H and 805H Hollowing Tools
£12.99 inc VAT
Robert Sorby 804CO9 Mushroom Cutter, fits 803H, 804H and 805HRobert Sorby 804CO9 Mushroom Cutter, fits 803H, 804H and 805H
British Made
Robert Sorby 804CO9 Mushroom Cutter, fits 803H, 804H and 805H
Robert Sorby 804CO9 Mushroom Cutter, fits 803H, 804H and 805H Hollowing Tools
£10.99 inc VAT

Robert Sorby 805C 3/16' (5mm) Captive Ring Tool Cutter, fits 804H and 805HRobert Sorby 805C 3/16' (5mm) Captive Ring Tool Cutter, fits 804H and 805H
British Made
Robert Sorby 805C 3/16' (5mm) Captive Ring Tool Cutter, fits 804H and 805H
Robert Sorby 805C 3/16' (5mm) Captive Ring Tool Cutter, fits 804H and 805H Tools
£12.99 inc VAT
Robert Sorby 805C 3/8' (10mm) Captive Ring Tool Cutter, fits  804H and 805H
British Made
Robert Sorby 805C 3/8' (10mm) Captive Ring Tool Cutter, fits 804H and 805H
Robert Sorby 805C 3/8' (10mm) Captive Ring Tool Cutter, fits  804H and 805H tools
£12.99 inc VAT

Robert Sorby Proedge 472 Tip Holder / Cutter Holder
Robert Sorby Proedge 472 Tip Holder / Cutter Holder
Robert Sorby 472 Tip Holder / Cutter Holder for sharpening HSS tips on a Proedge
£12.99 inc VAT
'Tarrant' Light Pull Drive Replacement Stepped Drill Bit 3mm/6mm x 120mm
£12.99 inc VAT

Charnwood 1MT / 2MT Revolving Centre
Charnwood 1MT / 2MT Revolving Centre
Choose your size below, you will receive one centre only
£19.99 inc VAT
PEN MANDREL SUPPORT CENTRE 1 MT
PEN MANDREL SUPPORT CENTRE 1 MT
The Pen Mandrel Support Centre has been designed and manufactured by PLANET here in the UK as an optimum way of holding and supporting the Pen Mandrel Shaft during the making of pens. This product is much the same as our Standard Rotating Centre (SD1/2), having 2 sealed bearings, a 12mm nose to represent 12mm bushings, is offered in 1MT & 2MT, precisely machined and designed to last and satisfy...
£29.99 inc VAT

PEN MANDRELL SUPPORT CENTRE 2MT
PEN MANDRELL SUPPORT CENTRE 2MT
The Pen Mandrel Support Centre has been designed and manufactured by PLANET here in the UK as an optimum way of holding and supporting the Pen Mandrel Shaft during the making of pens. This product is much the same as our Standard Rotating Centre (SD1/2), having 2 sealed bearings, a 12mm nose to represent 12mm bushings, is offered in 1MT & 2MT, precisely machined and designed to last and satisfy...
£29.99 inc VAT
Planet 11222 Large Drive Centre 2 Prong 1 1/2' (38.1mm) 2MT
Suitable for all large types of spindle work.Integral points will not work loose. Removable with extractor ring. 4 prong for squared spindle ends, 2 prong for out of square spindle ends.
£37.99 £26.49 inc VAT

Planet 11242 Large Drive Centre 4 Prong 1 1/2' (38.1mm) 2MT
Planet 11242 Large Drive Centre 4 Prong 1 1/2' (38.1mm) 2MT
Suitable for all large types of spindle work.Integral points will not work loose. Removable with extractor ring. 4 prong for squared spindle ends, 2 prong for out of square spindle ends.
£39.99 inc VAT
Planet Deluxe Rotating Centre
Planet Deluxe Rotating Centre
Deluxe Rotating Centre
£49.99 inc VAT

Planet Finial Support Mandrel Kit
Planet Finial Support Mandrel Kit
A brand new product designed by Planet. The Finial Mandrel fits into the tail stock and offers support for the fine end of a finial whilst turning the rest of it. The Finial Mandrel Kit has 3 Delrin (nylon type) inserts with 3 sizes 3mm, 4.5mm & 6mm hole depending on the size of Finial being turned. They fit into the inner race of a free running bearing. Available in 1MT & 2MT
£31.99 inc VAT
Planet Hollow Rotating Centre
Rotating centre with 5/16” bore for long hole boring.Based around our standard duty configuration. Also useful for spindle turning when there is a danger of a centre point splitting the stock. Set comprises: Hollow rotating centre, nose cone for use as standard centre, centring rod.
£47.89 £31.99 inc VAT

Planet Lathe Centre Alignment ToolPlanet Lathe Centre Alignment Tool
Planet Lathe Centre Alignment Tool
A brand new product from Planet. Aligns your headstock back with your tailstock after using it in 'outboard' mode.
£16.99 inc VAT
Planet LBD1 Lace Bobbin Drive Centre 1/2' (12.7mm) 1MT
Tapered drive for lace bobbins, etc. Mouth of drive is 1/2” square
£21.99 £14.99 inc VAT

Planet LBD2 Lace Bobbin Drive Centre 1/2' (12.7mm) 2MT
Tapered drive for lace bobbins, etc. Mouth of drive is 1/2” square
£22.99 £15.79 inc VAT
Planet LD1 Light Duty Rotating Centre  (60Deg) (22mm) 1MT
Planet LD1 Light Duty Rotating Centre (60Deg) (22mm) 1MT
Light Duty Rotating centre. Designed to facilitate the turning of small items. 22mm dia. head with 60 deg. point. Twin deep groove ball races.
£21.99 inc VAT

Planet Mini Drive centre
Planet Mini Drive centre
Mini Drive Centre With Integral Points 9mm x 4 prong
£14.99 inc VAT
Planet Piloted Drive Centre 1' (25.4mm)
1” diameter 4 prong head. Head relieved behind flutes to prevent binding. Supplied with inter-changeable point, pilot and hex key.
£32.99 from £22.59 inc VAT

Planet Standard Drive Centres 1MT
Planet Standard Drive Centres 1MT
Suitable for all types of spindle work.Integral points will not work loose. Removable with extractor ring. 4 prong for squared spindle ends, 2 prong for out of square spindle ends.
from £15.99 inc VAT
Planet Standard Drive Centres 2MT
Planet Standard Drive Centres 2MT
Suitable for all types of spindle work.Integral points will not work loose. Removable with extractor ring. 4 prong for squared spindle ends, 2 prong for out of square spindle ends.
from £15.99 inc VAT

Planet Tarrant Light Pull Drive Kit inc stepped drill 3mm/6mm x 120mmPlanet Tarrant Light Pull Drive Kit inc stepped drill 3mm/6mm x 120mm
£19.99 inc VAT
Planet Tarrant Light Pull Drive SPARE Stepped Drill 3mm/6mm x 120mm
Planet Tarrant Light Pull Drive SPARE Stepped Drill 3mm/6mm x 120mm
Planet Light Pull Drive Spare Stepped Drill 3mm/6mm x 120mm
£12.99 inc VAT

Record Power 4 Prong Drive Center 2MT
Sold Out
Record Power 4 Prong Drive Center 2MT
Buy with confidence - Record Power Price Guarantee!
£26.99 inc VAT
Record Power Spur Centre
Record Power Spur Centre
Buy with confidence - Record Power Price Guarantee!
£21.99 inc VAT

Record Power Standard Woodworm ScrewRecord Power Standard Woodworm Screw
Record Power Standard Woodworm Screw
Buy with confidence - Record Power Price Guarantee!
£17.59 inc VAT
Page: First | | 58 | 59 | 60 | 61 | 62 |